Very effective Emulsifier - Alkaline based cleaner  with good high foaming nature for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution. May be applied by brush, hand spray and by high and low pressure washing machines.
It is a strong water based alkaline cleaner primarily designed to provide numerous cleaning applications including:
•    Cleaning of vegetable oils, animal oils, fatty acids, fish oils, grease, waxes, oil, sludge soot, carbon deposits and general dirt and grime.
•    Cleaning of inert gas soot in cargo tanks.
•    Cargo hold cleaning after coal and pet coke.
It is a heavy duty non corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high presure cleanig machines. Ideal for difficult cleaning problems faced in industrial and other plants,  Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.
 

AQUAATUFF ALKALINE LIQUID - HD (RXSOL-22-3030-25)

The Importance of Aquatuff  by High-Pressure Cleaning

The job of high pressure cleaning can be done easier & quicker by simply using RxTuffin correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1:  Spraying the  AQUAATUFF ALKALINE over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.

After the Aquatuff has been  sprayed on the surface and  before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the AQUAATUFF ALKALINE thoroughly dissolv- es the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of AQUAATUFF ALKALINE substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of RxTuff in correct dosages is half the job done.

3 Pieces of Good Advice:
Apply  Aquatuff on dry surface where possible! A dry surface will absorb far better than a wet surface. When applying AQUAATUFF ALKALINE on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the Aquatuff may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of Aquatuff will give the best effect .

Product Description:- AQUAATUFF ALKALINE is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals. It is a low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials.

Applications:- AQUAATUFF ALKALINE Suitable for cleaning engine components like fuel and  Lube oil filters, Injection nozzles, pump components, inlet  and  exhaust valves &  primarily refers to cleaning of  hard surfaces, such as Decks, Tanks, Engine-rooms,  etc. can be used for all  types of cleaning and degreasing and  may be applied by brush, handspray, high and low pressure washing machines etc.

Directions for Use and Dose Rates:
General Cleaning:-  AQUAATUFF ALKALINE can be used for all types of cleaning &  degreasing & may be applied by  Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination Aquatuff should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of AQUAATUFF ALKALINE to a bucket of water. Aquatuff  solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into  the Aquatuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, Aquatuff is not recommended for washing machines.                        

•    Ideal for cleaning after coal and pet coke. Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes  &  Soot from inert gas systems.

Method of Application and Dose Rates:-

• Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
• Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
• Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.

Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-

• Spray AQUAATUFF ALKALINE on with a high-pressure cleaning machine and use 1:6 with water. If used with a hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
• Leave for about 30-45 minutes. The surface should be kept wet.
• Wash down with hot water (80°C) and check the cargo tank.
• Repeat the procedure if necessary.

Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirulation   or hand spraying provide acceptable options.For boiler  fire  side  cleaning, a 10-20 % hot  solution, (temp. above 40°C),  should   be  sprayed on  to  the surfaces to be cleaned. Allow to  penetrate for 20 minutes and flush off. For deposits  which are very hard to remove, increase the concentration to 50% and repeat if necessary.