Categories: Hold Solution-22
Images: Alt
Product Short Description: Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. Stock available at - Kandla, Mumbai, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata, Haldia, Fujairah
Product Description:

AQUAATuff High Foam CLEANER liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is -  Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

beams, girders, and other structure.

AQUAATuff High Foam CLEANER plays very important role in hold cleaning and general digressing. It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high presure cleanig machines.

Product Application:

Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds AQUAATuff High Foam CLEANER plays very important role in washing down with use of chemicals.  AQUAATuff High Foam CLEANER classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Product Dose:

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
 

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using AQUAATuff High Foam CLEANER incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1:  Spraying the  AQUAATuff High Foam CLEANER over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.

After the AQUAATuff High Foam CLEANER has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the AquaTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of AQUAATuff High Foam CLEANER substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of AquaTuff in correct dosages is half the job done.

General Cleaning :- AQUAATuff High Foam CLEANER can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If  the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination AQUAATuff High Foam CLEANER should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of AquaTuff to a bucket of water. The AQUAATuff High Foam CLEANER solution can be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the AQUAATuff High Foam CLEANER solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, AQUAATuff High Foam CLEANER is not recommended for washing machines. 


20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition                    Use Undiluted from to 20-50% diluted with water. 
Medium soil deposition                 10-20%  diluted with water. 
Light Soil ( general degreasing )   5-10% diluted with water.

Product Note:
AQUAATuff High Foam CLEANER is absolutely free along with the purchase of slip coat - Hold block materials. Aquatuff High foam Free 1000 Ltr against 1000 Ltrs purchase of Slip Coat Plus at our Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf.
 

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily  matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

 

Preparation
Preparing Cargo Holds for loading Grain depends on the previous cargo.
1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames, beams, girders, and other structure.
2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds, Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.
3. There should not be traces of live & dead insect & weevils.
4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge cover needs to be grain tight but not watertight.
5. Bilge well should be cleaned of previous cargo dray and odour free.
6. Bilge suction should be operational at all the times. 
 
Removal of cargo residue:
Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept, scrapped & collected in a drum. Attention to be given
• Australian ladder and its platforms and stanchions
• Beams and girders under cross decks
• Frames, beams, girders, and other structure
• Large pipes holding brackets behind the pipes
 
 
Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member
 
Loose Rust & Paint Scale:
A sharp hand scraper shall be used to take off the peeling rust & paint scale Special attention to following areas:
• Australian ladder and its platforms, hand rails and stanchions
• Australian ladder and its platforms and stanchions
• Beams and girders under cross decks
• Frames, beams, girders, and other structure
• Large pipes holding brackets behind the pipes
• Hatch coamings and under hatch covers
• Booby hatches & cover
 
Tank top loose rust
Tank top should be free of loose rust and cargo residue
Any rust which can be scraped by hand scrapers should be removed.
The tank top should be rinsed with fresh water
 
Cleanliness of cargo hold bilges
Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.
The filter (Rose Box) must be cleaned thoroughly
The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water
Product Technical Specification:
Tips for Hold cleaning - Prior to high pressure hold washing, excess cargo residue on the tank top should be removed by hand sweeping and lifted out of the holds via the use of a portable mucking winch.  After all excessive cargo residue has been removed then the holds can be washed with salt water using a highpressure hold cleaning gun, supplemented by the deck air line to provide increased pressure. This is the most commonly used method of hold cleaning. Then use AQUAATuff High Foam CLEANER hold cleaning Marine Chemicals · Cleaning Chemicals; Cargo Hold Cleaning detergent to get optimum result.
Remarks:
Hold Cleaning Preparation and Method : 
Preparing Cargo Holds for loading Grain depends on the previous cargo.
1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,
beams, girders, and other structure.
2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,
Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.
3. There should not be traces of live & dead insect & weevils.
4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge
cover needs to be grain tight but not watertight.
5. Bilge well should be cleaned of previous cargo dray and odour free.
6. Bilge suction should be operational at all the times. 
 

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,
scrapped & collected in a drum. Attention to be given
• Australian ladder and its platforms and stanchions
• Beams and girders under cross decks
• Frames, beams, girders, and other structure
• Large pipes holding brackets behind the pipes
 
 
Then Cleaning and sweeping coal cargo from the hold  as maximum possible by HELPER / Crew member
 

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale
Special attention to following areas:
• Australian ladder and its platforms, hand rails and stanchions
• Australian ladder and its platforms and stanchions
• Beams and girders under cross decks
• Frames, beams, girders, and other structure
• Large pipes holding brackets behind the pipes
• Hatch coamings and under hatch covers
• Booby hatches & cover
 
Tank top loose rust
Tank top should be free of loose rust and cargo residue
Any rust which can be scraped by hand scrapers should be removed.
The tank top should be rinsed with fresh water
 

Cleanliness of cargo hold bilges : 

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.
The filter (Rose Box) must be cleaned thoroughly
The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water
prod_useful_area:

Ship marine hold cleaning chemicals

AQUAATuff High Foam CLEANER most suitable for cargo hold and tank cleaning.

AQUAATuff High Foam CLEANER plays very important role during ship hold cleaning http://rxmarine.com/Aqua-Tuff-High-Foam-conc , Its high foam abilityincreasing Aquatuff cleaning power on the vertical surface, As liquid product can't sustain on the vertical surface while HIGH composite FOAM can sustain on the surface which is resulting from good cleaning effect. 
Extra foaming is major features which is differentiating Aquatuff high foam to general Aquatuff.

AQUAATuff High Foam CLEANER using procedure and cleaning method : 
1st Step Cleaning of extra and excess loose particle::: 
Before applying  AQUAATuff High Foam CLEANER on hold surface, Makes sure extra loose cargo particle should be removed manually or Air blown method. Then cleaning procedure can be followed either by high foam machine or Manual. 
2nd step is for Mixing and dilution of AQUAATuff High Foam CLEANER:::
If cleaning step is with HP machine ( High Pressure ), Then mix concentrated Aquatuff high foam with fresh water, it can be diluted 1 Ltrs AQUAATuff High Foam CLEANER with 4 to 5 Ltrs Fresh water.  

If cleaning step followed by hand spray, Then apply aquatuff high foam neat on the surface. Approx  1 ltr covers 10 to 12 square meter. 

3rd Step final procedure::: 

Leave for about 30 – 45 minutes. The surface remains wet. Wash down with hot water at around 80 - 90 degree. Rinsing procedure can be repeated 1 to 3 times if required for Cargo Tank and Cargo Hold Cleaning.

Product Supply Location:

AQUAATuff High Foam CLEANER supplier in Mumbai, Nhava Seva, Pirpav, Surat - Hazira, Kandla - Gandhidham, Sikka - Mundra, Manglore - Goa, Vizag - Visakhapatnam, Gangavaram, Kakinada, Chennai - Ennore, Kolkata, Haldia, Paradip, Buj buj,  Dubai - Sharjah, Fujairah Middle East