Corrosion Inhibitor 1304
Part No: RXSOL-81-8195-210
Excellent pre treatment and binder for metal surfaces to be painted. Concentrated blend of RXSOL proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surfac
Iron Ore Red Dust Cleaner manufacturer, supplier and exporter. Iron Ore Red Dust Cleaner is advanced blend of non corrosive cleaner with additional base and inhibitor. Its powerful chemical rust removal action dissolves rust without any mechanical action. This is the reason why Iron Ore Red Dust Cleaner used in removal of iron ore stain without reaction on paint, rubber, plastic and glass. Iron Ore Red Dust Cleaner is frequently used in the mining and construction industry and also most commonly use to clean SHIP HOLD after disharging of IRON ORE.
Application
Test Iron Ore Red Dust Cleaner on a small inconspicuous area before use.
Do not apply Iron Ore Red Dust Cleaner undiluted.
A more concentrate dilution may be required where concrete has been cured for an extended period of time.
Do not leave Iron Ore Red Dust Cleaner on any surface for extended periods of time.
To maintain product integrity, keep container sealed when not in use.
Dosage
Use 10 to 20% of Iron Ore Red Dust Cleaner with fresh water and left to react for 5 - 40 minutes then the residues should be rinsed off thoroughly with clean water jet. Click for More details http://rxmarine.com/Iron-Ore-cleaning-direction
If hardness contaminations remain repeat the process. Also cleaning property can be increase at temperature of 75 to 80 ‘C
Technical Specification
Iron Ore Red Dust Cleaner Usage Directions
Directions for Use
In general Dilute 1 part Iron Ore Red Dust Cleaner with 4 parts water and spray onto the surface being cleaned, And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate.
And For Hard Deposits Vigorously agitate the on the surface being cleaned with a stiff bristled brush or broom. And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate. Again, vigorously agitate the surface. The iron ore will begin to break up and be released from the substrate.
Stubborn areas may need to be again saturated and left for a further 10 minutes before vigorously agitating.
Rinse the surface with a high pressure washer or hose until all dissolved concrete and Iron Ore Red Dust Cleaner has been removed from the surface being cleaned.
MSDS

| Product Name | Iron Ore Red Dust Cleaner |
| Product Type | RXSOL-22-1388-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail @ rxmarine.com |

INGREDIENTS
All hazardous substances as defined by the NOHSC code 1008 are listed by chemical name and CAS No. Other ingredients which are determined to be non-hazardous are listed by generic name or as “other ingredients determined not to be hazardous.”
CHEMICAL NAME CAS No. PROPORTION
Proprietary Acidic Organic Salt Complex Secret 30-60%
Other ingredients determined not to be hazardous >60%

HAZARDOUS SUBSTANCE ACCORDING TO THE CRITERIA OF NOHSC
NON DANGEROUS GOODS ACCORDING TO THE Australian Dangerous Goods Code
Product Name: iRON ORE Red DUST CLEANER
Risk Phrase:
R36 Irritating to eyes
R37 Irritating to respiratory system
R38 Irritating to skin
Safety Phrases: S(1) Keep out of reach of children S24/25 Avoid contact with skin and eyes.

|
Swallowed: |
If poisoning occurs, immediately contact a doctor or a Poisons Information Centre Tel 131 126 . Do NOT induce vomiting. Give 3 glasses of water |
|
Eyes: |
In case of contact with eyes, flush immediately under running water (ensure eyelids are held open) for 15 minutes. If irritation persists contact a doctor or Poisons Information Centre. |
|
Skin: |
Remove contaminated clothing immediately and wash skin thoroughly with soap and water. Seek medical advice if irritation persists |
|
Inhaled: |
Remove from contaminated area. Apply artificial respiration if not breathing. |
|
First Aid Facilities: |
Normal washroom facilities. |
|
Advice to doctor: |
Treat symptomatically. Immediate dilution with water beneficial. |

Flammability: Not flammable or combustible.
Fire/Explosion Hazard: Use dry chemical, foam or water fog. Wear full body protective clothing with self contained breathing apparatus (SCBA) and
protective gloves. Use any means available to prevent any spillage entering a watercourse.
Hazardous Combustion Products: None known

Spills and Disposals:
Large Spills - Absorb on sand, dirt, vermiculite or similar absorbent material. Place into labelled drums and dispose of according to local government regulations. Immediately notify emergency services (Police or Fire Brigade) if the spill is too large for you to safely and effectively handle.
Small Spills – Flush away with copious amounts of water.
Personal Protective Equipment: Refer to Section 8 of this MSDS for PPE required.

| Storage & Transport: |
Store in a cool place and out of direct sunlight. Store away from strong alkalis and oxidizing agents. Store away from possible contact with non-ferrous metals. Keep container sealed when not in use. Store locked up and out of reach of children. Only store in the original container as supplied by the manufacturer. |
|
Handling: |
Always use recommended Personal Protective Equipment (see section 8 of this MSDS). Do not mix with any other chemical unless expressly recommended by the manufacturer. |

Exposure Standards: No exposure standards have been assigned to this product.
Engineering Controls: Maintain adequate ventilation at all times. In most circumstances natural ventilation systems are adequate unless the material is heated,
reacted or otherwise changed in some type of chemical reaction, then the use of a local exhaust ventilation system is recommended.
Personal Protection Equipment:
Gloves – Use NBR or vinyl gloves.
Goggles – Use chemical goggles.
Respiratory Protection – Not normally required. If used in confined spaces, select and use respirators in accordance with AS/NZS 1715/1716.
The use of half-face P1 (dust/mist) respirator with replaceable filters is recommended.

Appearance: Charastic colour liquid with mild chemical odour
Boiling Point: Not available
Vapour Pressure: Not available
Specific Gravity: 1.12
Flashpoint: Not flammable
Flammability Limits: Not flammable
Solubility in Water: Completely soluble
OTHER PROPERTIES Corrosiveness: Mildly corrosive to carbon steel, galvanized metal and aluminium.
Reactivity: Will react with alkalis and powdered oxidizing agents.
pH: <1.0 (Concentrate)

Stability: Stable under normal conditions of use.
Hazardous Decomposition Products: Non known.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong alkalis and oxidizing agents.
Conditions to avoid: Incompatibilities and excessive heat.

HEALTH EFFECTS:-
ACUTE
Swallowed: Will cause irritation to the mouth, throat and stomach with effects including mucous build-up, irritation to the tongue and lips and pains in the stomach, which may lead to nausea, vomiting and diarrhoea.
Eye: Will cause severe irritation and possible burns to the eyes with effects including: tearing, pain, corneal opacity and blurred vision. Skin: Will cause irritation to the skin, with effects including; redness, itching and drying/defatting.
Inhaled: Mists from the product may cause irritation to the nose, throat and respiratory system with effects including; coughing, discomfort, breathing difficulty and shortness of breath.
CHRONIC Prolonged or repeated skin contact may lead to dermatitis. Prolonged eye contact may cause permanent eye damage.
Toxicological Information: There is no toxicological information for the product Discrete

Ecological Information: There is no ecological information for the product IRON Ore Red Dust Cleaner

Disposal Methods: Recycle all plastic containers using suitable local council recycling facilities. Rinse out the container with clear water. Avoid tipping product directly into the sewer system.

IRON Ore Red Dust Cleaner is not classified as a Dangerous Good for transport or storage.
UN Number: Not allocated
Dangerous Goods Class and Subsidiary Risk: Not allocated
Proper Shipping Name:Not allocated
Hazchem Code:Not allocated
Poisons Schedule No: Not allocated

Poisons Scheduling: S5
S1 Avoid contact with eyes

Abbreviations:
ppm - Parts per million
TLV - Threshold Limit Value
mmHG - Millimetres of Mercury (Hg) – this is a unit of pressure
CAS No - Chemical Abstracts Service Registry Number
TWA - Time Weighted Average
STEL -Short Term Exposure Limit
PEL - Permissible Exposure Limit.
< & >- < Less Than > Greater Than
UN - United Nations
AICS - Australian Inventory of Chemical Substances
LC50 - Lethal Concentration LC50 is the concentration of a material in air which causes death of 50% (one half of a group of test animals
LD50 - Lethal Dose”. LD50 is the amount of a material, given all at once, which causes the death of 50% (one half) of a group of test animals.
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.
| Iron Ore Red Dust Cleaner |