Corrosion Inhibitor Zinc Based
Part No: RXSOL-40-4029-025
Corrosion Inhibitor with Zinc salts and Polyphosphates
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System. Phosphates and zinc stabilizer for anti-scale / anti-corrosion water treatment formulations. Also demonstrates excellent efficiency in the presence of soluble iron where acrylic polymers fail. Excellent dispersant for iron oxides.
Corrosion Inhibitor Zinc Based is a high-performance multi-component corrosion inhibitor system based on zinc chloride and phosphonic acid chemistry. The product provides dual-mode protection through anodic passivation and phosphonate adsorption film formation, offering effective corrosion control in aqueous industrial systems.
It is designed for use in closed loop cooling systems, industrial water circuits, hydrostatic testing fluids, and process water systems where both corrosion and mild scaling tendencies are present.
SCALE & CORROSION INHIBITOR FOR HIGH STRESS COOLING WATER SYSTEM...
Application
Corrosion Inhibitor OPEN Cooling System scientifically formulated to keep clean open recirculating systems and also prevent from scale formation . Chemically Corrosion Inhibitor OPEN Cooling System will disperse scale and corrosive products, silt etc and can be used as an anti-foulant along with other treatments.
Excellent scale inhibition for a variety of applications including cooling circuits, boilers and RO units.
It is widely used in Boilers, cooling water and membranes
Where can RXSOL Corrosion Inhibitor Zinc Based be used?
- Closed loop cooling water systems
- Industrial heat exchangers and chillers
- Hydrostatic testing of pipelines and vessels
- Temporary rust protection of metal surfaces
- Process water systems in chemical and petrochemical plants
- Equipment storage preservation fluids
Dosage
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System is highly concentrated cooling water treatment product, Its small dosage from 0.5 – 1 liter per 10 Tons of Cooling Water. The source of water also directly affecting its dosage as The dosage depends on the quality of the supply water ( Total hardness and Chloride content as low as possible) . Control is by simple colourismetric test.
Optimum result of COOLING SYSTEM can be obtained by maintaing pH level 8 to 8.5 and Total phosphate level should be maintained between 20 and 30 ppm.
Feel free to ask for RXSOL PHOSPHATE TEST KIT, RXSOL HARDNESS TEST KIT, RXSOL CHLORIDE TEST KIT. We are keeping full range of TEST KIT.
DOSAGE BASED ON ZINC LEVELS
ACTIVE ZINC value in system after dosing should be maintained at 1 to 5 ppm.
Therefore, total product dosage must be in the range of 20-80 ppm to prevent scaling and corrosion
Correct dosage can be understood taking into account water quality and other factors.
Rapid protection against corrosion is achieved by pre-treating the system with between three and five times the normal maintenance dosage for seven to ten days. The maintenance dosage is then applied to the recirculating water at all times.
Technical Specification
Specific Gravity : 1.10 to 1.20
Flash Point : Non Flammable
Freezing Point : 0 Degrees Cent.
| Property | Specification |
|---|---|
| Appearance | Clear to light amber liquid |
| Odour | Mild acidic |
| pH (as supplied) | 3.0 - 5.5 |
| Specific Gravity (25°C) | 1.25 - 1.45 |
| Solubility | Completely miscible in water |
| Flash Point | Non-flammable |
| Stability | Stable under normal storage conditions |
MSDS
| Product Name | : | RXSOL-40-4029-025 |
| Product Type | : | Corrosion Inhibitor Zinc Based |
| Revised Date | : | 10-04-2022 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
STOCK Point : Fujairah, Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Muscat, Nairobi
| Phone | : | +91 22 27815541 / 42 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | mail @ rxmarine.com |
| Chemica Name | Concentration | CAS Number |
| Polyphosphates | 10-30 | 10361-03-2 |
| Organophosphates | 1-5 | 115-26-4 |
| Polyacrylates | 2-5 | 9003-04-7 |
| Zinc Sulphate | 10-30 | 7446-19-7 |
| Proprietory Blend | 30-60 | ------------- |
*See Section 16
| Odour | Odourless |
| Appearance | Clear Liquid |
| Contact with eyes | May cause pain |
| Contact with skin | In cases of severe exposure, severe irritation may develop |
| Inhalation | Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
| Ingestion | Toxic if swallowed (R25) |
| Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water Contaminated clothing should be laundered before reuse When in doubt or symptoms persist, seek medical attention |
| Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids Obtain immediate medical attention |
| Ingestion | Never make an unconscious person vomit or drink fluids Give water or milk to drink Induce vomiting (only if patient is conscious) Obtain immediate medical attention |
| Inhalation | Inhalation is unlikely to occur Remove patient to fresh air When in doubt or symptoms persist, seek medical attention |
| General | In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) |
|
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions |
| Personal Precautions | Wear protective clothing as per section 8 |
| Immediate Actions | Use appropriate containment to avoid environmental contamination (S57) |
| Clean Up Actions | Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete. |
| Special Precautions | Wear protective clothing as per section 8 |
| Handling |
Wear protective clothing as per section 8 Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available |
| Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from heat |
| Exposure controls | No special precautions are required for this product |
| Occupational exposure controls | Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) |
Gloves Goggles suit No_Smoking
| Odour | Odourless |
| Appearance | Clear to Yellow Liquid |
| pH | 2.0 - 3.8 |
| Boiling point | not known |
| Vapour pressure | not known |
| Vapour density | not applicable |
| Freezing point | not known |
| Completely soluble in water | |
| Specific gravity (water=1) | 1.1 - 1.25 |
|
- This article is considered stable under normal conditions |
| Toxicological information | No experimental data available |
| Inhalation | Not applicable |
| Contact with skin | In cases of severe exposure, severe irritation may develop |
| Contact with eyes |
May cause severe irritation May cause pain |
| Ingestion | Toxic if swallowed (R25) |
| Carcinogenicity | No evidence of carcinogenic effects |
| Mobility | Completely soluble in water |
| Persistence and Biodegradability | Its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable. |
| Bioaccumulation Potential | Bioaccumulation of the components in this product is insignificant. |
| Other Adverse Effects | No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment. |
| Disposal considerations | Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation |
- Not classified as hazardous for transport
| Classification and labeling |
Contains Benzothiazol-2-thiol. May produce an allergic reaction.Cooling Water Treatment 15 Regulatory information |
| Risk Phrases | Toxic if swallowed (R25) |
| Safety Phrases |
Wear suitable protective clothing, eye/face protection and gloves (S36/37/39) In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) This material and its container must be disposed of in a safe way (S35) |
|
Text of R and S phrase codes used in this safety data sheet:- R25: Toxic I f swallowed; R43: May cause sensitisation by skin contact; The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product.In terms of safetyr equirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application (s) without seeking advice from manufacturer. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |