Fluorescein Liquid Dye RX

Fluorescein Liquid Dye RXSOL   is a commonly used dye for hydro test operations .Fluorescein Liquid Dye RXSOL   is a brown liquid which produces a red / pink solution once diluted in water. The solution then produces an orange fluorescence when excited with a blue or green light. For subsea detection of Fluorescein Liquid Dye RXSOL, an optimum excitation wavelength  should be used.

Normal dose for application is approximately 100 ppm. Rx Marine  can not stipulate an exact dose for Fluorescein Liquid Dye RXSOL . This is due to the strength of colour required being determined by a number of scenarios e.g. style and sensitivity of detection apparatus, sea bed depth and tidal currents. Generally, as a rule of thumb, the dye must not be dosed at below 100ppm for visual detection.
Detection of Fluorescein Liquid Dye RXSOL has been proven using the  Leak Detection Systems.

 Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah, Muscat, Nairobi

Hazard Category:  Not applicable

Hazard Statement:  Not applicable

Inhalation: Remove person to fresh air

Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention.

Skin Contact: Wash with soap and water. Seek medical attention if irritation develops. 

Ingestion: If conscious, rinse mouth and give victim large amounts of water. Seek medical attention.

Extinguishing Media: Material is not flammable. Use extinguishing media suitable to surrounding materials.

Special Equipment and Precautions: Use water to cool nearby containers and structures. Wear full protective equipment, including suitable respiratory protection.

Specific Hazards: None identified

Hazardous combustion products: None identified

Spill Procedures: Prevent spread of spill. Absorb with sand or inert material. Sweep or scoop into a disposal container. Flush spill area with water.

Incompatible Materials: Incompatible with strong acids.

Storage and Handling: Store in a cool, dry, well-ventilated area away from incompatible materials. Keep containers tightly closed and protect them from physical damage. Protect from direct light and minimize contact with air. 

OSHA & ACGIH Exposure Limits:

Water None identified

Fluorescein, sodium salt None identified

Engineering Controls: Use adequate general or local exhaust ventilation to keep fume and/or dust levels as low as possible. Respiratory Protection: If use generates annoying or irritating dusts, mists or vapors, use a NIOSH approved respirator with a particulate filter. Skin/Eye Protective Equipment: Safety glasses. Facilities storing or utilizing this material should have readily accessible eyewash stations and safety showers. Select respirators and other safety equipment in accordance with regulations and based upon the particular conditions of use and risk of exposure. Always use safe chemical-handling and good industrial hygiene practices.

Apearance: Clear, dark reddish orange liquid

Odor:Not available

Odor Threshold:No odor 

pH: Not available 

Melting/Freezing Point: Not available 

Initial Boiling Point and Boiling Range: Not available 

Flash Point:Not available 

Evaporation Rate: Not available 

Flammable or Explosive Limits (% by volume in air) Solubility: Not available 

Auto-Ignition Temperature: Not available 

Vapor Density: Not available 

Reactivity: No information available

Stability: Stable

Possibility of Hazardous Reactions: Hazardous polymerization will not occur

Conditions to Avoid: Excessive heat and exposure to light.

Incompatibles: Incompatible with strong acids.

Decomposition Products: None identified
 

Effects of Over Exposure:

Inhalation: None identified

Skin Contact: None identified

Eye Contact: None identified

Ingestion: None identified

Additional Effects: None identified

Chronic Effects: None identified

Target Organs: None identified

Reproductive Effects: None identified

Carcinogenicity: None identified 

Persistence and degradability: No information available

Bioaccumulative potential: No information available

Mobility in soil: No information available

Other adverse effects: No information available

Disposal Procedures: Dispose of material and containers in accordance with all local, state and federal regulations

This product is not a regulated material for domestic ground transporation.

Environmental hazards: No information available

Special precautions: No information available

Bulk transport: No information available

Symbols & Classification: Xi Irritant

R- Phrases: R36 Ittitating to the Eyes

S- Phrases: S26  In case of contact with eyes, rains immidiately with planty of water and seek medical advice.

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Rx Marine International be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.