Lithium Bromide Water solution

Removal of Paint, Flash, Burrs and other flaws in plastic, alloy die casting and electronics
Cleaning Automotive parts
Cleaning Aircraft engines and turbines
Removing Graffiti
Architectural cleaning and restoration of steel, wood, brick, stone or concrete
Polishing and cleaning of fine metals and alloys

Walnut shell is Soft Abrasive for industrial use. Walnut Shell has excellent durability.

Walnut shell also used to blast clean and polish soft metals, glass, fiberglass, wood, plastic and stone.

Walnut Shell is used in both tumbling and vibratory applications for polishing gems and jewellery. It also works as a de-burring and de-flashing product for molding, casting and electrical parts.

Walnut Shell is ground to various sizes ranging from coarse to extra fine, allowing for a fine degree of control over the desired finish. Like other soft media, Walnut Shell cleans and removes matter from surfaces without damaging underlying material.

Common blast cleaning applications include stripping auto and truck panels, cleaning delicate molds, jewelry polishing, armatures and electric motors prior to rewinding, and deflashing plastics. When used as a blast cleaning media, walnut shell grit removes paint, flash, burrs and other flaws in plastic and rubber molding, aluminum and zinc die‐casting and electronics industries. Walnut shell can replace sand in paint removal, graffiti removal and general cleaning in restoration of buildings, bridges and outdoor statuaries.

Wide range of grades available, including custom orders
Gentle – clean surfaces without damaging underlying material
Porous – can be used to absorb contaminants
Organic: renewable and environmentally friendly
100% silica-free
Re-usable
 

Specification : 
Physical Characteristics

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

STOCK Point ::: Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah, Muscat, Nairobi

The product is not classified as hazardous pursuant to directives 67/548/EEC and 1999/45/EC and subsequent amendments and upgrades and does not contain substances classified as being hazardous to human health or the environment pursuant to 67/548/EEC and subsequent amendments.

See Section 16

 This product is not dangerous/Hazardous.

No episodes of damage to health ascribable to the product have been reported. Nevertheless, observance of good industrial hygiene is recommended.

GENERAL INFORMATION: Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminated water used for extinction and the remains of the fire according to applicable regulations.

SUITABLE EXTINGUISHING MEDIA
The extinction equipment should be of the conventional kind: carbon dioxide, foam, powder and nebulised water.

EXTINGUISHING MEDIA WHICH SHALL NOT BE USED FOR SAFETY REASONS NONE IN PARTICULAR HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE. Do not breathe combustion products (carbon oxide, toxic pyrolysis products,etc).

SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS

Hardhat with visor, fireproof clothing (fireproof jacket and trousers with straps around arms, legs and waist), work gloves (fireproof, cut proof and dielectric), a depressurised mask with facemask covering the whole of the operator’s face or a self-respirator (self-protector) in the event of large quantities of fume.

PERSONAL PRECAUTIONS: Use breathing equipment if fumes or powders are released into the air.

ENVIRONMENTAL PRECAUTIONS: The product must not penetrate the sewers, surface water, ground water and neighbouring areas.

METHODS FOR CLEANING UP :Confine using earth or inert material. Collect as much material as possible and eliminate the rest using jets of water. Contaminated material should be disposed of in compliance with the provisions set forth in point 13.

Make sure that equipment is available for cooling the vessels, to prevent the danger of over-pressure and overheating in the event of fire in the vicinity. Refer to the other sections of this data sheet for information relating to health and environmental risks.

8.1 Exposure limit values:Not available

8.2 Exposure controls:Observance of safety measures used in handling chemical substances.

RESPIRATORY PROTECTION:None required.

EYE PROTECTION:None required.

HAND PROTECTION:None required.

SKIN PROTECTION:None required

Colour: Not available

Odour: neutral

Appearance: granule

Solubility: negligible in water

Specific: gravity from 600 to 790 gr/l

Granulometry: - Size Distribution > 1.7 mm (2% maximum); 1.4 mm (40% maximum)

Humidity: < 11%

Packing Bags: 25 Kgs

Flash point :172 °C

Vapour density: Not available

Evaporation speed :Not available

Comburent properties: Not available

Partition coefficient: n-octanol/water Not available

pH 6.5 - 7.5

Boiling point: Not available

Flash point: Not available

Explosive: properties Not available

Vapour pressure: Not available

Specific gravity: Not available

The product is stable in normal conditions of use and storage. In the event of thermal decomposition or fire, vapours potentially dangerous to health may be released.

According to currently available data, this product has not yet produced health damages. Anyway, it must be handled according to good industrial practices.

Use this product according to good working practices. Avoid littering. Inform the competent authorities, should the product reach waterways or sewers or contaminate soil or vegetation.

Reuse, when possible. Neat product residues should be considered special nonhazardous waste. Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations. Solid residues may be suitable for disposal in an authorised landfill site.

CONTAMINATED PACKAGING

Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.

This product is not dangerous under current provisions of the Code of International Carriage of Dangerous Goods by Road (ADR) and by Rail (RID), of the International Maritime Dangerous Goods Code (IMDG), and of the International Air Transport Association (IATA) regulations.

Warning symbols: None

Hazard sentences (R): None

Caution recommendations (S): None