Membrane Cleaner RXSOL- 3304

A multi purpose bituminous product supplied in a paint consistency. Applicable as an adhesive primer, coating or for tree surgery. Good water, acid and alkali resistance. Suitable for protection of galvanised iron gutters, downpipes, metal railings and metals exposed to weather, for priming dry concrete decks and as an adhesive to adhere Malthoid to metal.

Colour: Black
Dry Time: 6-8 Hours
Flashpoint: Flammable - Flash point 32oC min
Coverage:
As a paint/primer:
8m2/litre approx. on concrete
10m2/litre approx. on metal
As an adhesive for Malthoid:
5m2/litre approx.

Storage: May be stored in sealed containers under cover at normal temperatures for 12 months.

RO Chemicals-33

Membrane Cleaner RXSOL- 3304

Application

BITUMEN PAINT conforms to BS3416: Type 1 Class A for the waterproofing and weather protecting of
steelwork, concrete and potable water tanks. BITUMEN PAINT is used for the protection of ferrous and non-ferrous metals, concrete roofing, felt, fiber cement, corrugated iron, asphalt and wood, against water. Drying Time Approximately 6 hours depending on drying conditions. A solvent-borne, bituminous black paint. When dry it forms an odorless and taint-free bitumen film.
BITUMEN PAINT is supplied ready for use and should not require thinning. Apply at least two coats by brush or spray allowing each coat to dry before applying the next coat. Note: At very low service temperatures the coating will become less flexible, while at high temperatures it becomes soft and less resistant to degradation by the environment, and will ultimately flow.

Dosage

<p style="text-align: justify"> All surfaces must be thoroughly clean, dry, sound and free from grease, oils, waxes and all loose materials. New galvanised iron must be allowed to weather for at least six months prior to application.<br /> <br /> When used as a protective coating, use directly from the container with a brush, broom or spray (55kPa pressure in pot and 275kPa pressure at gun). When used as an adhesive for Malthoid, first loose lay Malthoid in position. Turn back the layer (approx. half way), paint the exposed metal with Bitumen Paint, then apply a coating of Bitumen Paint to the underside of the Malthoid. Place the sheet in position again and rub out to remove air pockets. Repeat this operation with the remainder of the sheet. To provide increased durability in external application, allow to dry for 14 days and apply a reflective paint, eg Tremco Alumicool, Tennis Court Paint etc.</p>

Technical Specification

Surfaces must be clean, dry and free from grease, oil, wax or any loose contaminating material.

New metal surfaces should be allowed to weather for a minimum of three months prior to coating.

Over rusted surfaces it is essential to remove loose rust or scale, wire brushing will do, prior to coating.

Appearance:	A thin black liquid, with a strong solvent odor
Solids Content:	Above 35%
Dangerous Goods Class:	3
Poisons Schedule Number:	5

MSDS

Product Name	Rxsol-18-1013
Product Type	BITUMEN PAINT

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	+91 22 65113333 / 5555 / 9999 / 27611360
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com

Chemical Name	%	CAS Number	OEL(sol)	Mel
White Spirit	42-45%	64742-82-1	600mg/m3	(8hr TWA)
Bitumen containing aromatic oils	55-58%	64742-93-4

*See Section 16

irritant

Irritant

Inhalation	Excessive inhalation can cause nausea, headache, intoxication and unconsciousness.
Ingestioin	May cause irritation to the digestive tract and mouth causing vomiting and abdominal pain.
Skin Contact	Prolonged contact will defat and dry the skin and may lead to irritation and dermatitis.
Eye Contact	Will cause intense smarting and irritation.

Inhalation	Remove to fresh air. Give oxygen/artificial respiration of needed. CONSULT DOCTOR.
Ingestion	DO NOT INDUCE VOMITING. Give plenty of milk or water. CONSULT DOCTOR.
Eyecontact	Flush with copious clean water minimum 15 minutes ensure thorough irrigation. CONSULT DOCTOR.
Skin Contact	Remove contaminated clothing. Apply proprietary skin cleaner then wash with copious soap and water. Apply skin cream.

Extinguishing Media	Dry powder, CO2, Earth, Sand, Foam. DO NOT USE WATER
Speacial Fire Fighting Procedure	Wear self contained breathing apparatus, full protective clothing. Spray drums with water to keep cool.
Unusual Fire & Explosion Hazards	Vapour is heavier than air. Combustion produces toxic gases.

Steps to taken in case material is realesed or spilled
Absorb onto inert material, e.g. sand, earth. Put into suitable containers. Prevent from entering water courses.

Precautions for safe Handling	Keep in tightly closed container in cool dry area from all sources of ignition.
Other precautions	Store away from oxidising agents, peroxides, foodstuffs.

Respiratory Protechtion (Type)	Self contained breathing apparatus if in enclosed spaces. Otherwise, not normally required.
Ventilation Local Exhaust	Ensure adequate ventilation to comply with OEL.
Protective Gloves	Rubber, PVC
Eye Protection	Safty googles long sleeved overalls

gloves goggles suit no_smoking

Gloves Goggles Suit No_Smoking

Appearance	Black Paste
Odour	Paint Like
pH	N/A
Specific Gravaty	0.90-0.93
Vapour pressure(MM Mercury)	0.90-0.93
Vapour Density (air=1)
Metling point/Freezing point	N/A
Water solubility	Insoluble
Viscosity	Viscous Liquid
Percentage volatile by volume(%)	42-45%
Evoporation Rate (Butyl Acetate=1)	.19
Flash Point@/Method Used	Above 32ºC (Abel CC)
Lower Explosive Limits	0.6%
Upper Explosive Limits	8.0%

Stability	Stable under normal conditions
Conditions to avoid	High Tempretures
Incompatibility/ Materials to avoid	Oxidising agents, strong acids, Alkalis, halogens.
Hazarodus Decomposition Products	Combution produces toxic gases.
Hazardous Polymerisation	Will not occur

LD50/oral/rat = 5000mg/kg (white spirit)

White Spirit is a Marine Pollutant

Incinerate or landfill according to local regulations.

Un Number	1263
RID-ADR	Class 3
Packing group	III
HI	30

Risk & Safety Phrases
R10	Flamable
R40/21	Harmful-Possible risk of irreversible effects in contact with skin
R51/53	Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
S24	Avoid contact with Skin
S36/37/39	Wear sutible protective clothing, gloves and eye/face protection

Recommended uses and restrictions: See below
Source of key information used to compile SDS, CHIP regulations 1994. EH40
If this product is re-distributed and re-formulated for sale, details of its hazards and recommended methods for safe handling must be passed to customers. Customers are urged to ensure that the product is entirely suitable for their own purpose. It is the customer’s responsibility to ensure that a suitable and sufficient assessment of the risks created by a work activity using this product is undertaken before this product is used. The information contained in this Safety Data Sheet does not constitute the users own assessment of workplace risk as required by other Health & Safety Legislation (e.g. the Health and Safety at Work Act, 1974;the control of Substances Hazardous to Health Regulations, 1988). The data given here is based on current knowledge and experience. The purpose of this data sheet is to describe the products in terms of their safety requirements. The data does not signify any warranty with regard to the product’s properties.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Enquire About This Product