Skip to main content
Drag

Mud Drilling Detergent RXSOL ORG DD

Drilling Fluids & Mud Oil Field chemicals

Mud Drilling Detergent RXSOL ORG DD

Part No RXSOL-81-8139-025

It is designed to reduce the surface tension of all water-base mud systems and reduce the sticking tendency of water-sensitive shale cuttings.

Overview

It is designed to reduce the surface tension of all water-base mud systems and reduce the sticking tendency of water-sensitive shale cuttings.

Application

RXSOL ORG DD has application in all drilling areas and can be used in virtually any water-base drilling fluid. It is used primarily in upper-hole drilling to minimize bit and Bottom-Hole Assembly (BHA) balling, reduce surface tension, and aid in dropping sand and the removal of drill solids.

Dosage

DRILLING DETERGENT may be used as an emulsifier at any point in the drilling operation to improve emulsification of oil and reduce the viscosity of oil- contaminated fluids.  RXSOL ORG DD frequently reduces torque and drag, even when no oil is present in the system. Normal treatments range from 0.1 to 0.2 lb/bbl (0.3 to 0.6 kg/m3) and provide satisfactory performance under most conditions.

In severegumbo shale areas, 4 to 6 lb/bbl (11.4 to 17 kg/m3) concentrations of RXSOL ORG Drilling  Detergent are recommended to minimize bit and BHA balling; higher concentrations may cause foaming and require a defoamer. Rxsol ORG DD  is effective in all water-base systems including freshwater, brackish water, seawater and saturated saltwater fluids.

Technical specification

Typical Physical Properties:


Physical appearance  :Light-blue-green liquid
Specific gravity              :1.01-1.02
pH (1% solution)          :8.2
Solubility in water         :100%
Freezing point               :32°F (0°C)

Safety data sheet (MSDS)

The MSDS for Mud Drilling Detergent RXSOL ORG DD is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.

Request MSDS