Skip to main content
Drag

Oleic acid

EVA 2518 is an 18.2% ethylene - vinyl acetate copolymer resin, designed for a variety of foam moulding application

Raw Chemicals-19

Oleic acid

Part No: RXSOL-19-1538-090

Vinyl Acetate Monomer

EVA 2518 is an 18.2% ethylene - vinyl acetate copolymer resin, designed for a variety of foam moulding application
Application

EVA is an 18.2% Ethylene Vinyl Acetate Copolymer

Technical Specification
VINYL ACETATE MONOMER
Test Results

Appearance

Clear clean liquid with a charactristic odour
Solubility
Soluble in water in all proportions
Colour (Pt-Co Scale) H.U.
10
Distillation range at 760 mm Hg
First drop to dry point 0.8°C
(Including 115.3±0.1°C)
Moisture, % by mass (by K.F.)
0.08
Assya, % (by GC, FID, Area %)
99.96
MSDS

Heading1 - Varanasi Chemical

Product Name RXSOL-19-1580-210
Product Type   Vinyl Acetate Monomer

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27815540
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail @ rxmarine.com
Website www.rxmarine.com

Heading2 - Varanasi Chemical

Chemical Name

CAS Number

EC Number

Index number

vinyl acetate

108-05-4

203-545-4

607-023-00-0

Heading3 - Varanasi Chemical

Hazard description:
Information concerning particular hazards for human and environment:
R 11 Highly flammable.

Heading4 - Varanasi Chemical

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water.

After swallowing

If symptoms persist consult doctor.

Heading5 - Varanasi Chemical

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Protective equipment: No special measures required.

Heading6 - Varanasi Chemical

Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection: Do not allow product to reach sewage system or any water course. Inform respective authorities in case of seepage into water course or sewage system.Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Ensure adequate ventilation.

Heading7 - Varanasi Chemical

Handling:
Information for safe handling:
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles

Heading8 - Varanasi Chemical

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
108-05-4 vinyl acetate

REL (USA)

TLV (USA)

Short-term value: C 15* mg/m³, C 4* ppm
*15-min
Short-term value: 53 mg/m³, 15 ppm
Long-term value: 35 mg/m³, 10 ppm

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: Wash hands before breaks and at the end of work.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

Heading9 - Varanasi Chemical

General Information

Form

Fluid

Colour

Colourless

Odour

Sweetish

Change in condition

Melting point/Melting range

-93.2°C

Boiling point/Boiling range

72°C

Flash point

-8°C

Ignition temperature 425°C

Danger of explosion

Product is not explosive. However, formation of explosive air/vapour mixtures are possible.

Explosion limits:
Lower 2.6 Vol %
Upper 13.4 Vol %
Vapour pressure at 20°C 111 hPa
Density at 20°C 0.93 g/cm³
Solubility in / Miscibility with water at 20°C 20 g/l

Heading10 - Varanasi Chemical

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Heading11 - Varanasi Chemical

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

Dermal

LD50

LC50

2920 mg/kg (rat)

2335 mg/kg (rabbit)

Primary irritant effect:
on the skin No irritant effect.
on the eye No irritating effect.
Sensitization No sensitizing effects known.

Heading12 - Varanasi Chemical

General notes: Water hazard class 2 (German Regulation) (Assessment by list): hazardous for water Do not allow product to reach ground water, water course or sewage system. Danger to drinking water if even small quantities leak into the ground.

Heading13 - Varanasi Chemical

Product:
Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.

Heading14 - Varanasi Chemical

Land transport ADR/RID (cross-border)
  ADR/RID class 3 Flammable liquids.
  Danger code (Kemler) 339
  UN-Number 1301
  Packaging group II
  Hazard label 3
  Description of goods 1301 VINYL ACETATE, STABILIZED
Maritime transport IMDG
  IMDG Class 3
  UN Number 1307
  Label 3
  Packaging group II
  EMS Number F-E,S-D
  Marine pollutant No
  Proper shipping name VINYL ACETATE, STABILIZED
Air transport ICAO-TI and IATA-DGR
  ICAO/IATA Class 3
  UN/ID Number 1301
  Label 3
  Packaging group II
  Proper shipping name VINYL ACETATE, STABILIZED

Heading15 - Varanasi Chemical

• Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials.
• Risk phrases:
11 Highly flammable.
• Safety phrases:
2 Keep out of the reach of children.
16 Keep away from sources of ignition - No smoking.
23 Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer).
29 Do not empty into drains.

Heading16 - Varanasi Chemical

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.