Categories: Hold Solution-22
Images: Alt
Product Short Description: Very effective concentrated cleaner for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washin
Product Description:

Very effective concentrated cleaner for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washing machines.

Product Application:

For degreasing and removal of residues of mimerals oil , coal stain and soot from surface.

 

Product Dose:

Refer to technical datasheet. and the Material Safety Data Sheet before use. Always refer to any warning, instructions and labels supplied with the products.

Product Note:

Not suitable for use with soft metal like aluminium, magnesium and zinc silicate coatings.

All chemical products should be handled with care. Protective clothing and respiratory equipment should be used where necessary.

Product Technical Specification:
Remarks:

Safety Phrases

S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Product Supply Location:
TOP 10 SHIP HOLD CLEANING CHEMICALS
 
Aquatuff - During ship hold cleaning process Aquatuff classified as multipurpose cleaning alkaline detergent. Also helpful to neutralize acidic residue produced during salt/sulphur etc... Its high foam nature also helps to clean vertical surface as well where mechanical cleaning is not possible... http://rx-sol.com/product/aquatuff-liquid-25-ltr
 
 
Slip Coat -  Cargo like sulfur/salt which is generating acidic residue on contact with moisture, directly damaging the metal surface. While such residue can be kept unreactive by keeping polymer layer in between cargo and hold surface. USES of SLIP COAT to create a thin polymer layer on the surface is a wise decision... http://rx-sol.com/product/slip-coat-rxsol-hold-block-210-ltr
 
 
Rust Stain Remover - Time to time removal of rust from the metal surface not only keeps HOLD surface clean and ready to load next cargo without heavy maintenance but also time to time removal of rust slow the rusting chemical reaction...http://rx-sol.com/product/rust-stain-remover-rsr
 
 
Coal Remover - Specialized product to lose COAL deposited particle... http://rx-sol.com/product/coal-remover-rx-hold-210-ltr

 
Cement Remover - Chemically breaks the strong bond of CEMENT and makes fluffy to blown with water... http://rx-sol.com/product/cement-remover-rx-hold-brite
 
 
Lime Remover - Dissolving of LIME with chemicals not only save time and manpower but also helps to minimize mechanical action which is damaging the surface... http://rx-sol.com/product/Lime-Remover-HD
 
 
Pet Coke Remover - Pet coke leaves a blackish oily residue on hold surface. PET COKE REMOVER emulsify and also resulting detergency cleaning effect... http://rx-sol.com/product/pet-coke-remover
 
Muriatic Acid with Corrosion inhibitor  - Direct uses of muriatic acid to clean hold results corrosive effect on metal, But its scientific blend with corrosion inhibitor protect the metal surface during cleaning and washing operation... http://rx-sol.com/product/muriatic-acid-250-kg-full-strength
 
 
PCS Hold Clean - Popular product for hold cleaning... http://rx-sol.com/product/pcs-hold-clean
 
Citric Acid - Helpful to clean cargo also effective to remove light rust stain... http://rx-sol.com/product/citric-acid-powder