RXSOL DEGSOL
Part No: RXSOL-10-1693-025
Poerfull Degreasing Agent
RXSOL-10-1693-025 is made by spray, immersion or ultrasonic methods at elevated temperatures. Different type of metals like aluminium, copper, brass, iron, steel...etc. can be treat in these baths. Proper type of chemicals must be selected to not to darken surface of metals such as aluminium and brass.
Generally RXSOL-10-1693-025 degreasers work at tamperatures in the range of 50-95°C. Operating temperature is very important, at lower temperatures time duration of cleaning reduces.
Application
Degreasing and cleaning of Aluminium and Brass.
Dosage
Operating time in immersion RXSOL-10-1693-025 baths is between 5 - 10 minutes with a chemical concentration of % 3 - 10. Depending on type of the metal and type of grease/oil, treating time can vary. RXSOL-10-1693-025 is mostly employed in chromate coating, iron phosphate coating and zinc phosphate coating lines as a prior application. Bath concentration must be controlled periodically and total alkalinity must be holded in optimum range by additon of chemicals.
The advantage of spray RXSOL-10-1693-025 is the effect of permanent pressure. Spraying pressure between 1,4 - 2,0 bar rises effect of cleaning. Temperature of the solution can be at a lower level 50-65°C relatively. Treating time in spray systems is lower, too, around 3 minutes.
Mid RXSOL-10-1693-025 chemicals commonly used is ultrasonic degreasing baths. Cleaning effect is high by the aid of ultrasonic vibrations. Chemical concentration is in the range of % 2 - 5 with a time duration of 3 - 7 minutes. Of course these values all depending on type of grease/oil on the metal surface.
Technical Specification
MSDS
| Product Name | RXSOL DEGSOL |
| Product Type | RXSOL-10-1693-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail @ rxmarine.com |
Chemical reaction of Proprietory Products
| PRODUCT NAME | PHOSCLEAN 102 |
| CHEMICALS NAME | SOLID MIXTURE OF ALKALINE SALTS CONTAINNING SMALL AMOUNT OF ORGANIC SURFACE ACTIVE AGENTS. |
| CHEMICALS FAMILY | ALKALINE CLEANER, SYNONYMS |
| FORMULA | MOLUCULAR WEIGHT |
| CAS | N/A |
| CAS NAME | N/A |
| SWALLOING | IMMEDIATELY CONSULT PHYSICIAN |
| SKIN | WASH WITH PROFUSE AMOUNT OF CLEAN WATER. |
| INHALATION | REMOVE TO FRESH AIR. |
| EYES | WASH WITH CLEAN WATER FOR 10 MINUTES AND OBTAIN IMMEDIATE MEDICAL ATTENTION. |
| FLASH POINT(Test methods) |
NOT APPLICABLE |
| FLAMABLE LIMITS | In Air, % by volume |
|
LOWER |
|
| UPPER | |
| EXTINGUISHING MEDIA | NON – FLAMABLE |
|
SPECIAL FIRE FIGHTING PRODUCTS |
NON – FLAMABLE |
|
UNUSUAL FIRE AND EXPLOSION HAZARDS |
IF EXPLODED ARTIFICIALLY STRONG ALKALIES (MOLTEN) WILL BE LIBERATED. USE WATER HOSE. |
| SWALLOING | NAUSEA / BURNING SENSATION / VOMITING. |
| INHALATION | IRRITATING. |
| EFFECTS OF REPEATED EXPOSURE | WILL CAUSE DAMAGE TO INTERNAL ORGANS. |
Imformation Not Found.
| CONDITION TO AVOID | KEEP AWAY FROM MOISTURE AND ACIDS |
| HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS. | IF IGNITED AT VERY HIGH TEMPERATURE MOLTEN ALKALIES WILL BE LIBERATED. |
|
BOILING POINT 760 mm Hg (101.325 kpa) |
Imformation Not Avalible |
| FREEZING POINT | Imformation Not Avalible |
| VAPOUR PRESSURE at 200 C | Imformation Not Avalible |
|
SOLUBILITY IN WATER OF PHOSCLEAN 102 |
COMPLETE |
| APPEARANCE AND ODOUR | OFF WHITE POWDER WITH SMALL LUMPS AND CHARACTERISTIC ODOUR. |
Imformation Not Found.
Imformation Not Found.
Imformation Not Found.
Imformation Not Found
Imformation Not Found
| PROTECTIVE GLOVES | RUBBER GLOVES |
| OTHER PROTECTIVE EQUIPMENTS | PROTECTIVE CLOTHINGS, GOGGLES AND RUBBER BOOTS. |
Imformation Not Found
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.