RXSOL RO 904
Part No: RXSOL-33-3313-025
RXSOL RO 904 : To the control Inorganic Foulant in membrane as like Calcium Carbonate, Calcium Sulphate, Barium Sulphate, Silica and other salt deposit on the semi-permeable surface.
RXSOL RO 904 : To the control Inorganic Foulant in membrane as like Calcium Carbonate, Calcium Sulphate, Barium Sulphate, Silica and other salt deposit on the semi-permeable surface.
Application
Dosage
Technical Specification
MSDS
| Product Name | Rxsol Defoam A |
| Product Type | RXSOL-81-8145-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail @ rxmarine.com |
| Name | CAS# | % by Weight |
|
Proprietary ingredients |
100 % |
| EMERGENCY OVERVIEW |
WARNING! CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION. Avoid contact with eyes and skin and clothing. Avoid breathing airborne product. Do not take internally. Wash thoroughly after handling. This product is a/an Clear, colorless liquid This product is very slippery. Dike and contain spills. Keep out of sewers and waterways. |
| ACUTE EFFECTS: | |
| INHALATION | May be irritating to the respiratory tract if inhaled. |
| INGESTION | May cause gastric distress, nausea and vomiting if ingested. |
| SKIN | Irritating to the skin. |
| EYES | Irritating to the eyes. |
| CHRONIC EFFECTS: | |
| CARCINOGENICITY |
IARC: Not listed. OSHA: Not regulated. NTP: Not listed. |
| ROUTE OF ENTRY | Inhalation. Skin and/or eye contact |
| GENERAL | Persons seeking medical attention should carry a copy of this MSDS with them. |
|
Eye Contact |
Promptly wash eyes with lots of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues. |
|
Skin Contact |
Wash skin thoroughly with soap and water. Remove contaminated clothing. Get medical attention if any discomfort continues. |
|
Inhalation |
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention if symptoms appear. |
| Ingestion | Drink a couple of glasses water or milk. Do NOT induce vomiting unless directed to do so by a physician. Never give anything by mouth to an unconscious person. Get medical attention. |
|
FLASH POINT (°F) |
232 |
| AUTO IGNITION TEMP. (°F) | N/D |
| FLAMMABILITY LIMIT - LOWER(%) | N/D |
| FLAMMABILITY LIMIT - UPPER(%) | N/D |
| EXTINGUISHING MEDIA |
Carbon dioxide (CO2). Dry chemicals. Foam. Water spray, fog or mist. |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear positive-pressure, self-contained breathing apparatus (SCBA) and protective fire fighting clothing (including fire fighting helmet, coat, pants, boots, and gloves). If protective equipment is not available or not used, fight fire from a protected location or safe distance. |
| UNUSUAL FIRE & EXPLOSION HAZARDS: | No unusual fire or explosion hazards noted. |
| HAZARDOUS COMBUSTION PRODUCTS | Irritating gases/vapors/fumes. Oxides of: Carbon |
| PERSONAL PRECAUTIONS | Wear proper personal protective equipment (see MSDS Section 8) |
| SPILL CLEAN-UP PROCEDURES | Absorb in vermiculite, dry sand or earth and place into containers. Rinse area with water. Dike far ahead of larger spills for later disposal. Do not contaminate drainage or waterways. |
|
HANDLING PRECAUTIONS |
Ventilate well, avoid breathing vapors. Use approved respirator if air contamination is above accepted level. Wear full protective clothing for prolonged exposure and/or high concentrations. Eye wash and emergency shower must be available at the work place. Wash hands often and change clothing when needed. |
| STORAGE PRECAUTIONS | Store at moderate temperatures in dry, well ventilated area. Keep in original container. |
| ENGINEERING CONTROLS | Use appropriate engineering controls such as, exhaust ventilation and process enclosure, to reduce air contamination and keep worker exposure below the applicable limits. |
| VENTILATION | upply natural or mechanical ventilation adequate to exhaust airborne product and keep exposures below the applicable limits. |
| RESPIRATORS: |
If exposed to particulates/aerosols:
If exposed to organic vapors: |
| PROTECTIVE GLOVES: | Chemical resistant gloves required for prolonged or repeated contact. Use protective gloves made of: Impermeable material. Such as, Neoprene, nitrile, polyethylene or PVC. |
| EYE PROTECTION | Wear chemical safety goggles where eye exposure is reasonably probable. |
| PROTECTIVE CLOTHING | Wear appropriate clothing to prevent repeated or prolonged skin contact. |
| HYGIENIC WORK PRACTICES | Wash promptly with soap and water if skin becomes contaminated. Change work clothing daily if there is any possibility of contamination. |
| APPEARANCE/PHYSICAL STATE | Liquid. |
| COLOR | Colorless. |
| ODOR | Sweet. |
| SOLUBILITY DESCRIPTION | Slightly soluble in water. |
| BOILING POINT (°F, interval) | 491 |
| DENSITY/SPECIFIC GRAVITY (g/ml) | 0.94 |
| VAPOR DENSITY (air=1) | N/D |
| VAPOR PRESSURE | <1.0 mmHg |
| EVAPORATION RATE | REFERENCE |
| pH-VALUE, DILUTED SOLUTION | N/A |
|
STABILITY |
Normally stable. |
|
Conditions to avoid |
Avoid heat. |
|
HAZARDOUS POLYMERIZATION |
Will not polymerize. |
| OLYMERIZATION DESCRIPTION: | Not relevant |
| MATERIALS TO AVOID | Strong oxidizing agents. |
| HAZARDOUS DECOMPOSITION PRODUCTS: | No specific hazardous decomposition products noted |
| EMERGENCY OVERVIEW |
WARNING! CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION. Avoid contact with eyes and skin and clothing. Avoid breathing airborne product. Do not take internally. Wash thoroughly after handling. This product is a/an Clear, colorless liquid This product is very slippery. Dike and contain spills. Keep out of sewers and waterways. |
| ACUTE EFFECTS: | |
| INHALATION | May be irritating to the respiratory tract if inhaled. |
| INGESTION | May cause gastric distress, nausea and vomiting if ingested. |
| SKIN | Irritating to the skin. |
| EYES | Irritating to the eyes. |
| CHRONIC EFFECTS: | |
| CARCINOGENICITY |
IARC: Not listed. OSHA: Not regulated. NTP: Not listed. |
| ROUTE OF ENTRY | Inhalation. Skin and/or eye contact |
NA
WASTE MANAGEMENT:
This product does not meet the criteria of a hazardous waste if discarded in its purchased form. Under RCRA, it is the responsibility of the user of the product to determine at the time of disposal, whether the product meets RCRA criteria for hazardous waste. This is because product uses, transformations, mixtures, processes, etc, may render the resulting materials hazardous.
Empty containers retain residues. All labeled precautions must be observed.
DISPOSAL METHODS:
Recover and reclaim or recycle, if practical. Should this product become a waste, dispose of in a permitted industrial landfill. Ensure that containers are empty by RCRA criteria prior to disposal in a permitted industrial landfill.
NA
NA
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.