Product Category: Marine Tank Cleaning Chemical
Application: Cargo Tanks, Fuel Tanks, Hydrocarbon Residues & Heavy Mineral Deposits
Form: Liquid Concentrate
Brand: RXSOL – DUBICHEM Marine International
RXSOL ECO-SOLVE is a high-performance, environmentally conscious heavy-duty marine cleaning chemical designed for the removal of heavy mineral hydrocarbon deposits, oily residues, grease and persistent hydrocarbon contamination from cargo tanks and associated marine surfaces.
The product is formulated for demanding tank-cleaning operations where conventional general-purpose cleaners may not provide sufficient cleaning power. It is particularly useful when the objective is to achieve a deep, effective and hydrocarbon-free tank surface suitable for subsequent cargo loading.
Very effective cleaner for sticky PU, Gasious,Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stains residues, with out the need for Scrubbing or Brushing which can cause mechanical damages to surface and result in poor performance. Field test have shown that this is very gentle with personnel and on metallic colour surface. Should always be used at full strength to obtain maximum benefits.
Same Family PRODUCT ::: www.rxmarine.com/STICKNSOL ( STICK N SOL , RXSOL-15-1017-025 )
This heavy duty cleaner is a biodegradable degreaser (oil dispersant). It disperse and remove all types of oil, grease, wax, and stains, leaving the treated surface cleansed and back to original condition without any short or long term effects. And This cleaner is powerfull substitute of IPA, Methyl Ethyl Ketone , acetone, and other hazardous alcohol and solvents. This product have low evaporation rate and high solvency formula can significantly reduce overall solvent usage. It contains no water and it is 100% reactive proprietory blend.
One of the important applications of RXSOL ECO-SOLVE is preparation of tanks where subsequent cargo requirements demand a high level of cleanliness and minimal hydrocarbon carryover.
The product can form part of a planned tank-cleaning sequence involving pre-cleaning, chemical washing, rinsing and final inspection. The exact cleaning procedure should be selected according to the previous cargo, tank coating, contamination level and next-cargo requirements.
RXSOL ECO-SOLVE is intended for difficult contamination where heavy mineral hydrocarbons have adhered to tank surfaces and ordinary washing is insufficient.
Its cleaning action helps loosen and remove:
Mineral oil residues
Heavy hydrocarbon films
Oily deposits
Grease
Persistent tank contamination
Hydrocarbon-based cargo residues
The product may be applied using suitable tank-cleaning machines, spray equipment, circulation systems, brushing or manual application, depending on the cleaning operation and tank configuration.
Remove loose cargo residues where practical.
Pre-rinse the tank with suitable water.
Prepare the cleaning solution according to contamination level and operational requirements.
Apply through the appropriate tank-cleaning equipment.
Allow adequate chemical contact time.
Agitate or mechanically wash the contaminated surfaces where necessary.
Drain the cleaning solution.
Rinse thoroughly with clean water.
Inspect the tank and repeat the cleaning process if required.
Conduct wall-wash or other cleanliness testing where specified by the charterer, cargo requirement or vessel's tank-cleaning procedure.
Note: Dilution ratio, temperature and contact time should be selected according to the specific cargo residue and tank-cleaning requirement. Always refer to the latest RXSOL Technical Data Sheet before application.
Cleans, degreases and disperse heavy grease and oil build up on surfaces and hard to reach areas. Great for engines overhauling, heavy machinery, industrial equipment maintenance and mechanical parts cleaning.
Depends on usage this product is designed into two types :::
Suitable for fast and effective cleaning jobs on huge areas with very minimal scrubbing activity and instant residue removal.
Widely applicable at airports and hangars for its non-volatile, non-corrosive and bio-degradable.
Easy and safe to use for electrical and electronic small sensitive components with hard to reach area. Solutions are non-hazardous and non-abrasive
Machine maintenance and overhauling, tools restoration.
Heavy-duty marine tank cleaner
Designed for difficult mineral-hydrocarbon deposits
Effective against oily and greasy residues
Supports hydrocarbon-free tank cleaning
Suitable for cargo-tank cleaning operations
Useful for heavy contamination and persistent residues
Designed for professional marine cleaning applications
Environmentally conscious formulation
Suitable for use in planned tank-cleaning procedures
Yes. I found the official/public technical data sheet information for Careclean Eco-Solve. There are two public versions, and the later revision gives a dosage range of 0.5–2% for recirculation, while an earlier PDS gives 1–3% for DPP→CPP cleaning and 0.3–1% for hydrocarbon-free cleaning after mineral oil.
For an RXSOL product page, I recommend using the technical specifications below as a target/comparable specification only, unless your own RXSOL QC/COA confirms these values.
| Property | Typical Specification |
|---|---|
| Product Name | RXSOL ECO-SOLVE |
| Product Type | Heavy-Duty Marine Tank Cleaner |
| Physical State | Liquid |
| Appearance | Clear to slightly coloured liquid* |
| Density | Approx. 1.00 kg/L |
| pH | Approx. 7.0 at 5% dilution in fresh water |
| Flash Point | >62°C |
| Water Solubility | Dispersible / emulsifiable in water |
| Cleaning Action | Emulsifying / hydrocarbon residue removal |
| Application | Cargo tanks, hydrocarbon tanks, heat exchangers and industrial systems |
| Recommended Water | Fresh water or seawater, subject to application procedure |
| Recommended Application | Recirculation / tank-cleaning system |
| DPP → CPP Cleaning | Typically 1–3% solution* |
| HC-Free Cleaning after Mineral Oil | Typically 0.3–1% solution* |
| General Recirculation | 0.5–2% solution* |
| Operating Temperature | Approx. 60°C for demanding tank-cleaning applications* |
| Typical Cleaning Time | Approx. 2–4 hours, depending on contamination* |
| Marine Pollutant Classification | Not classified as marine pollutant according to referenced product information* |
| IMO Status | Comparable source product stated as IMO approved under MEPC.590* |
*Actual RXSOL values must be confirmed by the applicable RXSOL Technical Data Sheet, batch specification and approval documentation.
RXSOL ECO-SOLVE is designed for difficult mineral-hydrocarbon contamination, including residues associated with:
Crude and mineral oils
Coal tar
Benzene-containing residues
Lubricating oils
Petroleum distillates
Pyrolysis gas oil
Bitumen
Heavy hydrocarbon deposits
For demanding cargo-tank cleaning, a typical procedure can involve:
Prewash:
Prewash the tank with seawater at approximately 60°C.
Chemical concentration:
DPP → CPP: 1–3%
Hydrocarbon-free cleaning after mineral oil: 0.3–1%
Cleaning temperature:
Approximately 60°C
Circulation time:
Approximately 2–4 hours, depending on contamination and tank condition.
Final step:
Flush thoroughly with suitable water and drain the tank.
The public PDS confirms these application ranges and parameters for the source product.
The referenced product has a reported pH of approximately 7 at 5% dilution in fresh water, making it substantially different from strongly acidic or strongly alkaline tank cleaners.
The reported flash point is above 62°C, which is an important characteristic for marine and industrial cleaning operations.
The product uses an emulsifying cleaning mechanism to assist in loosening and removing heavy hydrocarbon residues and facilitate subsequent flushing.
The product is intended for heavily contaminated systems, including cargo tanks and certain industrial equipment. Marine Care also identifies Eco-Solve for rapid cleaning of challenging mineral-oil cargoes.
RXSOL ECO-SOLVE
Physical State: Liquid
Density: ~1.00 kg/L
pH: ~7.0 @ 5% dilution
Flash Point: >62°C
Cleaning Type: Emulsifying heavy-duty cleaner
Primary Use: Mineral hydrocarbon and cargo-tank cleaning
Typical Recirculation: 0.5–2%
DPP → CPP: 1–3%
HC-Free after Mineral Oil: 0.3–1%
Typical Temperature: ~60°C
Typical Circulation: 2–4 hours
Each batch of RXSOL ECO-SOLVE should be released against the approved RXSOL product specification and applicable Certificate of Analysis (COA). Density, pH, appearance and other critical parameters should be verified by the manufacturer's quality-control department before dispatch.
Other key areas of application
RXSOL ECO-SOLVE can be used for cleaning:
Cargo tanks
Hydrocarbon cargo tanks
Fuel-oil contaminated surfaces
Mineral-oil residue
Heavy oily deposits
Grease and hydrocarbon contamination
Tank bottoms and lower tank areas
Tank structures and associated equipment
Marine machinery areas
Industrial hydrocarbon-contaminated surfaces
RXSOL Eco-Solve Tank Cleaner, heavy duty tank cleaner, hydrocarbon tank cleaner, marine tank cleaning chemical, cargo tank cleaner, mineral hydrocarbon remover, hydrocarbon residue remover, hydrocarbon-free tank cleaning chemical, ship tank cleaner, vessel tank cleaner, marine chemical supplier, cargo tank cleaning chemical, heavy oil residue cleaner, RXSOL marine chemicals, tank cleaning chemical manufacturer, marine chemical supplier UAE, marine chemical supplier India, marine chemical supplier Oman.
Important: I have deliberately not copied Marine Care's exact formulation, dosage, pH, density or other proprietary technical specifications because the public source confirms the product's application and positioning but does not establish those specifications for an RXSOL formulation. The RXSOL TDS/COA should be used for the final technical values.
RXSOL Eco-Solve Tank Cleaner Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of RXSOL Eco-Solve Tank Cleaner at a competitive price from us. We have ready stock of RXSOL Eco-Solve Tank Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.