ANILINE BLUE-METHYL BLUE
Part No RXSOL-69-2898-356
Alkaline-based ceaner with a strong foaming action designed to rapidly emulsify greasy soils and oxidation…thereby leaving coils dirt-free and shining. suitable product for cleaning air-cooled condensers, permanent filters and other finned…
Overview
Alkaline Coiler Cleaner for AC units, Coils non-acid coil cleaners developed to provide foaming and brightening capabilities comparable to acid-based coil cleaners without the dangers of strong acids for cleaning of Air coolers, Scavenging air systems and turbochargers of diesel engine.
- Excellent grease-cutting capability.
- High foaming action-penetrates deep into multi-row coils to foam out dirt,grease and grime.
- One step cleaner-cleans,brightens and deodorizes.
Dosage
Using Procedure
| Method | Dilution / Concentration | Application Steps | Notes / Precautions |
|---|---|---|---|
| In-Service Cleaning | Undiluted or as per system specs | Pass through air trunking upstream of the charge air cooler. Follow with clean water rinse. | Use proper dosing and injection system. Ensure thorough rinse. |
| Typical Cleaning (Spray) | 1 part cleaner to 1–3 parts water | Apply using low-pressure sprayer. Leave for 3–7 minutes. Rinse thoroughly with water to remove all foam. | Remove all residues from roofs or surfaces to avoid deterioration. Fumes may cause irritation indoors. |
| Air Cooler / Turbocharger Cleaning | 5–25% in water | Inject cleaning solution for 10–15 minutes. Follow with equal quantity of fresh water for rinsing. | Ensure engine is off. Proper drainage required during the process. |
| Hand Spray Cleaning | Use concentrate | Spray directly on coils. Allow at least 1 hour for penetration. Rinse with high-pressure water. | Keep drain valve open during cleaning. Close after flushing. Engine must remain off. |
| Soak Method | Concentrated solution | Dip parts in solution. Allow time for deposits to loosen. Rinse thoroughly. | Ideal for stubborn carbon on metal machine parts. Wear protective gloves and goggles. |
Precaution ::--
Avoid skin / eye contact. Wear gloves and goggles when using. Use in well ventilated areas. Do not breathe vapors.
Technical specification
| Appearance | Clear, Slight Yellow |
| Odor | Fresh |
| pH | Alkaline |
| Sp. Gravity | >1.15 |
Safety data sheet (MSDS)
The MSDS for ANILINE BLUE-METHYL BLUE is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.