Skip to main content
Drag

Antifoam Defoamer AF20

Drilling Fluids & Mud Oil Field chemicals

Antifoam Defoamer AF20

Part No RXSOL-81-2066-200

Highly effective liquid antifoam formulated for controlling foaming and priming in produced water processing in oil gas, waste water treatment, etc

Overview

RXSOL Antifoam Defoamer AF20 is a concentrated, silicone-free antifoaming agent formulated using a synergistic combination of proprietory alcohols.

The formulation is designed to provide both rapid foam knockdown and sustained foam suppression. Antifoam Defoamer AF20 provides rapid destabilization of foam lamellae, while also contributing to persistent foam control and improved antifoam activity.

RXSOL Antifoam has demonstrated rapid foam-collapse performance in laboratory antifoam testing, including foam collapse within minutes and resistance to re-foaming under agitation/sparging conditions.

Application
Water & Wastewater Treatment
  • Effluent treatment plants
  • Sewage treatment systems
  • Industrial wastewater
  • Aeration tanks
  • Biological treatment
  • Sludge processing
  • Neutralization systems
Chemical Processing
  • Chemical blending
  • Reaction vessels
  • Mixing tanks
  • Detergent manufacture
  • Surfactant processing
  • Alkali cleaning solutions
  • Acid/alkali treatment systems
Industrial Cleaning
  • CIP systems
  • Tank cleaning
  • Equipment washing
  • Industrial degreasing
  • High-pressure cleaning
  • Detergent solutions
Marine & Oilfield
  • Tank-cleaning formulations
  • Oilfield chemical systems
  • Produced-water treatment
  • Drilling-fluid-related applications
  • Slop and oily-water treatment
  • Marine cleaning chemicals
Other Applications
  • Paper and pulp processing
  • Textile processing
  • Adhesives
  • Water-based formulations
  • Process auxiliaries
  • General industrial chemical processing
Dosage

The required dosage depends strongly on the type and concentration of foaming agents, process temperature, agitation and contamination level.

Initial recommended dosage

10-100 ppm
for routine foam prevention.

Moderate foam

50-250 ppm

Severe / persistent foam

100-500 ppm

Shock treatment

250-1,000 ppm

For exceptionally severe foam conditions, higher concentrations may be required during initial treatment, followed by a lower maintenance dose.

Recommended practice: Start at the lowest effective dosage and increase progressively.

Technical specification
Property Typical Value
Appearance Clear to slightly hazy liquid
Colour Colourless to pale yellow
Odour Characteristic fatty/alcohol odour
Specific Gravity @ 25°C 0.82-0.85
pH Not applicable / practically neutral
Viscosity @ 25°C Typically 10-20 cP
Flash Point Typically >50°C
Water Solubility Low; dispersible depending on system
Silicone Content Nil
Ionic Character Non-ionic
Active Matter ~100%

Safety data sheet (MSDS)

The MSDS for Antifoam Defoamer AF20 is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.

Request MSDS