Lab Equipment-61
Brush
Part No: RXSOL-61-2139-001
PENTAERYTHRITOL (TECH)
Pentaerythritol Mono Pentaerythritol 95% 98% Food Grade Crystal Powder C5h12o4 Four Hydroxy Methyl Methane Pentaerythritol, Pentaerythritol 95%-98%. Crystal Powder C5h12o4 Four Hydroxy Methyl Methane Pentaerythritol.
Application
Pentaerythritol is a simple five-carbon tetraol used in the fabrication of resins, alkylated resins, varnishes, PVC stabilizers, tall oil esters, and olefin antioxidants.
Dosage
Pentaerythritol as a Insecticides
An insecticide is a pesticide used against insects. They include ovicides and larvicides used against the eggs and larvae of insects respectively. Insecticides are used in agriculture, medicine, industry and the household.
Use of insecticides helps to increase in agricultural productivity.
Use of insecticides helps to increase in agricultural productivity.
Technical Specification
|
|||||||||||||||||||||||||||||
MSDS
| Porduct Name | PENTAERYTHRITOL (TECH) |
| Part Number | RXSOL-19-1606-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
| Chemical Name | Cas No | EC No | Whight | Formula |
| Propionitrile | 115-77-5 | 204-104-9 | 136,15 g/mol | C5H12O4 |
| Label elements | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| If inhaled | After inhalation: fresh air. |
| Eye Contact | After eye contact: rinse out with plenty of water. Remove contact lenses. |
| Swallowed | After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Carbon oxides Combustible. Development of hazardous combustion gases or vapours possible in the event of fire. |
| Further information | Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Advice for firefighters | In the event of fire, wear self-contained breathing apparatus. |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Enviromental Precaution | Do not let product enter drains |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |
| Advice of safe handling | For precautions see section 2.2. |
| Storage conditions | Tightly closed. Dry. |
| Storage class | Storage class (TRGS 510): 3: Flammable liquids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Skin protection | This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 minMaterial tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L |
| Respiratory protection |
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P1 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Control of environmental exposure | Do not let product enter drains. |
| Physical state | Clear, Liquid |
| Colour | White |
| Odour | No data available |
| Odor Threshold | No data available |
| pH | No data available |
| Melting Point | Melting point/range: 253 - 258 °C - lit. |
| Boiling Point | 276 °C at 40 hPa - lit. |
| Flash Point | > 150,00 °C - closed cup |
| Evaporation Rate | No data available |
| Flammability (solid, gas) | No data available |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | > 400 °C at 1.013 hPa |
| Decomposition temperature | No data available |
| Vapour pressure | < 1 hPa at 20 °C |
| Viscosity | No data available |
| Density | 1,39 g/cm3 at 20 °C |
| Relative Density | 1,37 at 20 °C |
| Partition coefficient | log Pow: -1,7 at 23 °C |
| Explosive properties | No data available |
| Surface tension | 71 mN/m at 20 °C |
| Reactivity | The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions | Risk of ignition or formation of inflammable gases or vapours with: Strong oxidizing agents Risk of explosion with: Nitric acid Acid chlorides |
| Conditions to avoid | No information available |
| Incompatible materials |
No information available
|
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity | LD50 Oral - Rat - male and female - > 5.110 mg/kg (OECD Test Guideline 401) Inhalation: No data available Dermal: No data available |
| Skin corrosion/irritation | Skin - Rabbit Result: No skin irritation |
| Serious eye damage/irritation | No data available |
| Respiratory or skin sensitization | No data available |
| Carcinogenicity | No data available |
| Germ cell mutagenicity | Test Type: reverse mutation assay Test system: S. typhimurium Metabolic activation: with and without metabolic activation Method: Mutagenicity (Salmonella typhimurium - reverse mutation assay) Result: negative |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure |
No data available
|
| Additional Information | Repeated dose toxicity - Rat - male and female - Oral - NOAEL (No observed adverse effect level) - 100 mg/kg RTECS: RZ2490000 To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. |
| Persistence and degradability | aerobic - Exposure time 28 dResult: 83,7 % - Readily biodegradable.(OECD Test Guideline 310) |
| Toxicity to fish | semi-static test LC50 - Oryzias latipes - > 100 mg/l - 96 h (OECD Test Guideline 203) |
| Toxicity to daphnia and other aquatic invertebrates | EC50 - Daphnia magna (Water flea) - 33.600 mg/l - 48 h |
| Toxicity |
No data available
|
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Other adverse effects | No data available . |
| Product | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number | ADR/RID: IMDG: IATA: |
| UN proper shipping name | ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods |
| Transport hazard class(es) | ADR/RID: - IMDG:- IATA:- |
| Packaging group | ADR/RID: - IMDG:- IATA:- |
| Environmental hazards | ADR/RID: No IMDG: No IATA: No |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |