Skip to main content
Drag

Chloride Soln 5 PPM


Chloride Soln 5 PPM
Wall Wash Test Kit-63

Chloride Soln 5 PPM

DI ISOPROPYL AMINE

Dosage
<br />
Technical Specification
PRODUCT NAME      DIISOPROPYLAMINE
CAS number       108-18-9
UN number        1158
Formula     [(CH3)2CH]2NH
Odour       AMINE
Solubility in water                  SLIGHTLY
Density      0.717   at 20 oC
Boiling point    84 oC
Melting point      -61oC
Viscosity         
Flashpoint      -7 oC
Explosive limits    
Vapour pressure     95 mbar at 20 oC
Skin absorption/irritation     YES
TLV      Country  NL              Year  1995      5 S ppm                 20 S     mg/m3
Pollution category    1994        C
MSDS

Product Name : DI ISOPROPYL AMINE
Part Number : RXSOL-19-1137-025

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.

VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, , JNPT, Goa, Mangalore, Cochin, Tuticorin, Chennai, Kakinada, Vizag, Paradip, Kolkata, UAE, Oman

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email 123@rxmarine.com
Website www.rxmarine.com

Name     of        Substance      Cas Number EINECS No Wt.% Formula  
DI ISOPROPYL AMINE 108-18-9 203-558-5 100% C6H15N  

 

Signal Word                        Danger
Hazard Statements

H225 Highly flammable liquid and vapour. H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.H331 Toxic if inhaled.

Precautionary statements   P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
Supplemental Hazard Statements none
Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Lachrymator., Rapidly absorbed through skin.
Classification according to Regulation (EC) No 1272/2008 Flammable liquids (Category 2), H225 Acute toxicity, Oral (Category 4), H302 Acute toxicity, Inhalation (Category 3), H331 Skin corrosion (Category 1A), H314 For the full text of the H-Statements mentioned in this Section, see Section 16.

  

General advice Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact            Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling  and/or in section 11
Indication of any immediate medical attention and special treatment needed No data available

Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture                    Carbon oxides, Nitrogen oxides (NOx) Flash back possible over considerable distance., Container explosion may occur under fire conditions.
Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary
Further information Use water spray to cool unopened containers

 

Personal precautions, protective equipment and emergency procedures

Wear respiratory protection. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. For personal protection see section 8.

Enviromental  Precaution  Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Methods and materials for
containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13).
Reference to other sections For disposal see section 13.

Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge.
Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Storage class (TRGS 510): Flammable liquids
Specific end use(s)  No other specific uses are stipulated

Engineering Control Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
Personal   Protection

Eye/face protection Equipment  : Eye/face protection Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection :  Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Full contact Material: Nitrile rubber Minimum layer thickness: 0.4 mm Break through time: 480 min If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.

Body Protection : Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use (US) or type ABEK (EN 14387) respirator cartridges as a backup to enginee protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided

       gloves                              

  

Form         liquid, clear
Colour colourless
Odour Ammonia odor
Initial boiling point and boiling range 84 °C - lit.
Melting point/freezing point Melting point/range: 61 °C - lit.
Flash Point -16.99 °C - closed cup
pH No Data Available
Evaporation rate No data available
Flammability (solid, gas) No data available
Upper explosion limit Upper explosion limit: 8.5 %(V)
Lower explosion limit Lower explosion limit: 1.1 %(V)
Explosive properties No data available
Vapor pressure 50 mmHg at 20 °C
 vapor density 3.49 - (Air = 1.0)
Relative density 0.722 g/mL at 25 °C
Water solubility 110 g/l at 25 °C - completely soluble
Solubility in other solvents No data available
Partition coefficient: octanol log Pow: 0.4 at 20 °C
Autoignition temperature 295 °C at 1,007 hPa
 decomposition temperature No data available
Viscosity, kinematic No data available
Explosive properties No data available
Oxidizing properties No data available
Relative vapour density 3.49 - (Air = 1.0)

Recativity                                             No data available
Chemical Stability Stable under recommended storage conditions.
Possibility of hazardous reactions No data available
Incompatible materials Strong acids, Strong bases, Strong oxidizing agents, Plastics
Hazardous Decomposition

Hazardous decomposition products formed under fire conditions. - Carbon oxides, Nitrogen oxides (NOx) Other decomposition products - No data available In the event of fire: see section 5

Condition to Avoid Heat, flames and sparks.

Acute toxicity LD50 Oral - Rat - male and female - 420 mg/kg(Diisopropylamine) LC50 Inhalation - Rat - male and female - 4 h - 5.35 mg/l(Diisopropylamine) (OECD Test Guideline 403) LD50 Dermal - Rabbit - > 10,000 mg/kg(Diisopropylamine)
Skin corrosion/irritation                                    

Skin - Rabbit(Diisopropylamine) Result: Causes severe burns. - 3 min (OECD Test Guideline 404)

Serious eye damage/eye irritation Eyes - Rabbit(Diisopropylamine) Result: Risk of serious damage to eyes. - 24 h (OECD Test Guideline 405)
Respiratory or skin sensitisation Maximisation Test - Guinea pig(Diisopropylamine) Result: Does not cause skin sensitisation. (OECD Test Guideline 406)
Germ cell mutagenicity Mouse(Diisopropylamine) lymphocyte Result: negative
Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity No data available(Diisopropylamine)
Specific target organ toxicity - single exposure No data available(Diisopropylamine)
Specific target organ toxicity - repeated exposure No data available
Additional Information Repeated dose toxicity - Rat - male and female - Oral - No observed adverse effect level - 50 mg/kg (Diisopropylamine) Repeated dose toxicity - Rat - male and female - No observed adverse effect level - >= 150 mg/kg (Diisopropylamine) RTECS: IM4025000 burning sensation, Cough, wheezing, laryngitis, Shortness of breath, spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.(Diisopropylamine) Liver - Irregularities - Based on Human Evidence(Diisopropylamine)


 

 

Toxicity to fish semi-static test LC50 - Gasterosteus aculeatus - 798 mg/l - 96 h(Diisopropylamine)
Toxicity to daphnia  and others static test LC50 - Daphnia magna (Water flea) - 110 mg/l - 48 h(Diisopropylamine)
Toxicity to algae                       static test EC50 - SELENASTRUM - 20 mg/l - 96 h(Diisopropylamine)
Toxicity to bacteria Respiration inhibition EC50 - activated sludge - > 100 mg/l - 3 h(Diisopropylamine) (OECD Test Guideline 209)
Biodegradability  aerobic - Exposure time 28 d(Diisopropylamine) Result: 11 % - Not readily biodegradable. (OECD Test Guideline 301D)
Bioaccumulative potential No data available
Mobility in soil No data available
Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects Harmful to aquatic life.

 

Waste treatment methods

Product Burn in a chemical incinerator equipped with an afterburner and scrubber b highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. And according to local , fedral rule and regulation.

Contaminated packaging Dispose of as unused product.

 

UN        Number                                          ADR/RID: 1158   IMDG: 1158    IATA: 1158
Proper shipping name ADR/RID: DIISOPROPYLAMINE   IMDG: DIISOPROPYLAMINE   IATA: Diisopropylamine
Transport hazard class(es) 
ADR/RID 3 (8)
Subsidiary risk IMDG 3 (8)
Subsidiary risk IATA  3 (8)
Packing group
Packing group ADR/RID: II    IMDG: II     IATA: II
Environmental hazards
Environmental hazards ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for use No data available

 

RegulationsSafety, health and environmental regulations/legislation specific for the substance or mixture This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Chemical safety assessment For this product a chemical safety assessment was not carried out

 

 

Other Information  

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  we assume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.