Corrosion Inhibitor for Multi Metal Cooling Water

Applications

RXSOL-40-4011-020 is recommended for:

• Closed recirculating cooling-water systems
• Retort cooling-water systems
• Engine and machinery cooling circuits
• Chilled-water systems
• Closed-loop industrial cooling systems
• Multi-metal cooling circuits
• Systems containing glycol-based uninhibited antifreeze
• Industrial equipment requiring long-term corrosion protection

Cooling water treatment specified corrosion inhibitior for multi-metal containng cooling systems to operate at high or low temperatures.

Alkaline Corrosion Inhibitor blend for multi-metal protection in closed-loop and chilled cooling water CLOSED circulating system

For systems containing no aluminium, RXSOL-40-4011-020 should be dosed at 0.5 to 1% (5 L–10 L/ 1000 L) in order to give a reserve of 50 ppm of sodium molybdate. For systems containing aluminium, the dosage of 1–1.5% should be added in order to maintain a minimum reserve of 100 ppm of sodium molybdate. In certain circumstances it may be necessary to adjust the pH separately by the addition of pH CONDITIONER - your Consultant will advise. In systems requiring significant passivation/higher initial dosages may be required to yield the required inhibitor residual.

Normal treated water control limits

pH 7.0 - 9.0 (Without Aluminium)

pH 7.0 - 8.0 (With Aluminium)

For systems containing aluminium it is important to maintain the system water pH in the range 7.0 - 8.0. Occasionally depending on the water characteristics and system treatment history the pH may rise above pH 8.0 which means that the risk of aluminium corrosion is increased - if this happens then high pH can be reduced by adding an appropriate quantity of pH Conditioner.

Multi-metal corrosion protection • Built-in pH buffering • Suitable for closed recirculating systems • Helps protect steel and copper alloys • Indicating dye for easier leak identification • Compatible with uninhibited antifreeze • Suitable for cooling and retort water treatment

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhpatnam, Fujairah, Muscat, Nairobi

 Substances which give the product

ADSORB BY INERT MATERIAL.
FLUSH SPILL AREA WITH PLENTY OF WATER. 
THE ALKALINE HAZARD OF THE PRODUCT IS REMOVED BY DILUTION WITH WATER

 Remarks:

This substance is not dangerous under current provisions of the Code of International Carriage of  Dangerous  Goods by  Road  (ADR)  and  by  Rail  (RID),  of  the  International  Maritime  Dangerous  Goods  Code  (IMDG),  and  of  the International Air Transport Association (IATA) regulations.

NO CARCINOGENIC PROPERTIES HAS BEEN FOUND WITH ANY INGREDIENTS.

NO EVIDENCE OF MUTAGENIC EFFECTS

EXPOSURE LIMITS NOT ASSIGNED

Legal Disclaimre:-

The above information is based on the present state of our knowledge of the product at the time of publication. It is given in good faith, No warranty is implied with respect to the quality or the specif ication of the product. The user must satisfy himself that the product is entirely suitable for his purpose.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.