DAC Disinfectant Liq
Part No: RXSOL-15-3008-025
Methoxy Triglycol
Application
Dosage
Technical Specification
| Physical state | Liquid |
| Colour | Colourless |
| Odour | Mild, sweet |
| pH | No Data Available |
| Freezing Point | -44 °C |
| Boiling point (760 mmHg) | 249 °C |
| Flash point | 110 °C (closed cup ) |
| Evaporation Rate | 0.01 (Butyl Acetate = 1) |
| Lower explosion limit | 1.3 % vol |
| Upper explosion limit | 9.9 % vol |
| Vapor pressure | 0.001 kPa at 25 °C |
| Relative vapor density | 5.67 at 20 °C |
| Relative density | 1.05 at 20 °C (water = 1) |
| Water solubility | > 1,000 g/L at 20 °C completely miscible |
| Partition coefficient: octanol | log Pow: -1.12 Measured |
| Autoignition temperature | 210 °C |
| Dynamic Viscosity | 7.3 mPa.s at 25 °C |
| Kinematic Viscosity | 7.43 mm2/s at 20 °C |
| Liquid Density | 1.0494 g/cm3 at 20 °C |
| Molecular weight | 164.20 g/mol |
| Molecular formula | CH3 O(CH2 CH2 O)3H |
MSDS

| Product Name | : Methoxy Triglycol |
| Part Number | : RXSOL-19-1357-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Hazira (Surat), Mumbai, Chennai,Vizag, Kolkata, UAE, Oman
| Phone | +91 22 2087 1200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| 123 @ rxmarine.com | |
| Website | www.rxmarine.com |

| Name of Substance | Cas Number | EINECS No | Wt.% |
| Triethylene glycol monomethyl ether | 112-35-6 | 203-962-1 | 100 % |

| Signal Word | None |
| Hazard Statements |
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. |
| Precautionary statements - prevention |
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. |
| Precautionary statements - response |
IF exposed or concerned: Get medical advice/ attention Storage: Store locked up. Disposal: Dispose of contents/ container to an approved waste disposal plant. |
| Other Hazard | No data available. |

| Eye Contact: | Flush eyes thoroughly with water for several minutes. Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a physician, preferably an ophthalmologist. Suitable emergency eye wash facility should be available in work area. |
| Skin Contact: | Wash off with soap and plenty of water. |
| Inhalation: | If breathed in, move person into fresh air. If not breathing, give artificial respiration. |
| Ingestion: | Rinse mouth with water. No emergency medical treatment necessary. |
| Most important symptoms and effects, both acute and delayed: | Aside from the information found under Description of first aid measures (above) and Indication of immediate medical attention and special treatment needed (below), any additional important symptoms and effects are described in Section 11: Toxicology Information. |
| Notes to Physicians: | No specific antidote. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient. |

| Suitable extinguishing media | Water fog or fine spray.. Dry chemical fire extinguishers.. Carbon dioxide fire extinguishers.. Foam.. Alcohol resistant foams (ATC type) are preferred. General purpose synthetic foams (including AFFF) or protein foams may function, but will be less effective. |
| Unsuitable extinguishing media | Do not use direct water stream.. May spread fire.. |
| Hazardous combustionproducts | During a fire, smoke may contain the original material in addition to combustion products of varying composition which may be toxic and/or irritating.. Combustion products may include and are not limited to:. Carbon monoxide.. Carbon dioxide. |
| Unusual Fire and Explosion Hazards: | Violent steam generation or eruption may occur upon application of direct water stream to hot liquids. |
| Advice for firefighters |
Fire Fighting Procedures: Keep people away. Isolate fire and deny unnecessary entry.. Use water spray to cool fire exposed containers and fire affected zone until fire is out and danger of reignition has passed. Burning liquids may be extinguished by dilution with water.. Do not use direct water stream. May spread fire.. Burning liquids may be moved by flushing with water to protect personnel and minimize property damage.. Special protective equipment for firefighters: Wear positive-pressure self-contained breathing apparatus (SCBA) and protective fire fighting clothing (includes fire fighting helmet, coat, trousers, boots, and gloves). If protective equipment is not available or not used, fight fire from a protected location or safe distance. |

| Personal precautions, protective equipment and emergency procedures |
Isolate area. Refer to section 7, Handling, for additional precautionary measures. Keep unnecessary and unprotected personnel from entering the area. Use appropriate safety equipment. For additional information, refer to Section 8, Exposure Controls and Personal Protection. |
| Enviromental Precaution | Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. See Section 12, Ecological Information. |
|
Methods and materials for containment and cleaning up |
Small spills: Absorb with materials such as: Sand. Vermiculite. Collect in suitable and properly labeled containers. Large spills: Contain spilled material if possible. Pump into suitable and properly labeled containers. See Section 13, Disposal Considerations, for additional information. |

| Advice on safe handling | Avoid contact with eyes. Wash thoroughly after handling. Spills of these organic materials on hot fibrous insulations may lead to lowering of the autoignition temperatures possibly resulting in spontaneous combustion. See Section 8, EXPOSURE CONTROLS AND PERSONAL PROTECTION. |
| Storage | Store in the following material(s): Carbon steel. Stainless steel. Phenolic lined steel drums. Do not store in: Aluminum. Copper. Galvanized iron. Galvanized steel. Viton. Neoprene. Nitrile. Natural rubber. |
| Advice on general occupational hygiene | Wash hands after use. Do not to eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. |

| Control parameters | Components with workplace control parameters |
|
Exposure controls |
Appropriate engineering controls General industrial hygiene practice. |
| Engineering Control | Use local exhaust ventilation, or other engineering controls to maintain airborne levels below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, general ventilation should be sufficient for most operations. |
| Personal Protection |
Eye / Face protection : Eye/face protection: Use safety glasses (with side shields). Safety glasses (with side shields) should be consistent with EN 166 or equivalent. |
| Hygiene measures | Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. |
Gloves Suit

| Physical state | Liquid |
| Colour | Colourless |
| Odour | Mild, sweet |
| Odor Threshold | No Data Available |
| pH | No Data Available |
| Melting Point | No Data Available |
| Freezing Point | -44 °C |
| Boiling point (760 mmHg) | 249 °C |
| Flash point | 110 °C (closed cup ) |
| Evaporation Rate | 0.01 (Butyl Acetate = 1) |
| Flammability (solid, gas) | Not applicable |
| Lower explosion limit | 1.3 % vol |
| Upper explosion limit | 9.9 % vol |
| Vapor pressure | 0.001 kPa at 25 °C |
| Relative vapor density | 5.67 at 20 °C |
| Relative density | 1.05 at 20 °C (water = 1) |
| Water solubility | > 1,000 g/L at 20 °C completely miscible |
| Solubility in other solvents | No data available |
| Partition coefficient: octanol | log Pow: -1.12 Measured |
| Autoignition temperature | 210 °C |
| Decomposition Temperature | No data available |
| Dynamic Viscosity | 7.3 mPa.s at 25 °C |
| Kinematic Viscosity | 7.43 mm2/s at 20 °C |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Liquid Density | 1.0494 g/cm3 at 20 °C |
| Molecular weight | 164.20 g/mol |
| Molecular formula | CH3 O(CH2 CH2 O)3H |

| Recativity | No data available |
| Chemical Stability | Stable under normal conditions. |
| Possibility of hazardous reactions | Polymerization will not occur. |
| Conditions to avoid: | Do not distill to dryness. Product can oxidize at elevated temperatures. Generation of gas during decomposition can cause pressure in closed systems. |
| Hazardous Decomposition |
Decomposition products depend upon temperature, air supply and the presence of other materials.. Decomposition products can include and are not limited to:. Aldehydes.. Ketones.. Organic acids.. |
| Incompatible materials: | Avoid contact with: Strong acids. Strong bases. Strong oxidizers. |

| Acute toxicity |
LD50 Oral - Rat - male and female - > 10.500 mg/kg (OECD Test Guideline 401) LD50 Dermal - Rabbit - male - 7.100 mg/kg |
| Skin corrosion/irritation |
Skin - Rabbit |
| Serious eye damage/eye irritation |
Eyes - Rabbit Result: No eye irritation (OECD Test Guideline 405) |
| Germ cell mutagenicity |
in vitro assay S. typhimurium Result: negative Mouse - male and female Result: negative |
| Carcinogenicity | IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. |
| Reproductive toxicity | No data available. |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |

| Ecotoxicity |
Acute toxicity to fish: Material is not classified as dangerous to aquatic organisms (LC50/EC50/IC50/LL50/EL50 greater than 100 mg/L in most sensitive species). LC50, Danio rerio (zebra fish), static test, 96 Hour, > 5,000 mg/l, OECD Test Guideline 203 or Equivalent Acute toxicity to aquatic invertebrates EC50, Daphnia magna (Water flea), static test, 48 Hour, > 500 mg/l, Directive 84/449/EEC, C.2 Acute toxicity to algae/aquatic plants ErC50, Desmodesmus subspicatus (green algae), static test, 72 Hour, Growth rate inhibition, > 500 mg/l, OECD Test Guideline 201 or Equivalent Toxicity to bacteria EC0, activated sludge, static test, 0.5 Hour, Respiration rates., > 2,000 mg/l, activated sludge test (OECD 209) |
| Persistence and degradability |
Biodegradability: Material has inherent, ultimate biodegradability according to OECD test (s) guidelines (reaches > 60 or 70% biodegradation in OECD test(s). 10-day Window: Pass Biodegradation: 100 % Exposure time: 13 d Method: OECD Test Guideline 301B or Equivalent |
| Bioaccumulative potential |
Bioaccumulation: Bioconcentration potential is low (BCF < 100 or Log Pow < 3). Partition coefficient: n-octanol/water(log Pow): -1.12 at 20 °C Measured |
| Mobility in Soil |
Potential for mobility in soil is very high (Koc between 0 and 50). Partition coefficient (Koc): 10 Estimated. |
| Results of PBT and vPvB assessment | This substance is not considered to be persistent, bioaccumulating and toxic (PBT). This substance is not considered to be very persistent and very bioaccumulating (vPvB). |
| Other adverse effects | This substance is not on the Montreal Protocol list of substances that deplete the ozone layer. |

| Remarks: | Any disposal practice must be in compliance with all local and national laws and regulations. Do not dump into any sewers, on the ground, or into any body of water. |

Hazard Pictograms:
| UN Number | ADR/RID: - IMDG: - IATA: None |
| UN proper shipping name |
ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods |
| Transport hazard class(es) ADR/RID: - IMDG: - IATA: None | |
| Packing group | ADR/RID: - IMDG: - IATA: None |
| Environmental hazards | ADR/RID: no IMDG Marine pollutant: no IATA: no |

|
Safety, health and environmental regulations/legislation specific for the substance or mixture |
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical safety assessment | For this product a chemical safety assessment was not carried out |

| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |