Skip to main content
Drag

Flocculating Agents

Boiler Water Treatment Chemicals Concentrated liquid alkaline product for corrosion and Calcium scale control in boilers.  Very usefull Concentrated Alkaline Liquid For Maintaining Ph - To adjust alkalinity.

Suitable for Low-pressure boiler systems (0-32 bar) , medium-pressure steam propulsion vessels (32-60 bar). And also suitable to  used for high pressure steam generating systems (60-84 bar).

Mechanism :  It converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown.

Flocculating Agents
Water Filter, Vessel, Softner, Accessory-32

Flocculating Agents

Alkalinity Builder Very usefull Concentrated Alkaline Liquid For Maintaining Ph which protects corrosion, scalling by controlling Calcium scale in water system.

Boiler Water Treatment Chemicals Concentrated liquid alkaline product for corrosion and Calcium scale control in boilers.  Very usefull Concentrated Alkaline Liquid For Maintaining Ph - To adjust alkalinity.

Suitable for Low-pressure boiler systems (0-32 bar) , medium-pressure steam propulsion vessels (32-60 bar). And also suitable to  used for high pressure steam generating systems (60-84 bar).

Mechanism :  It converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown.

Application

RXSOL-50-5002-025 provides the alkaline condition for hardness control to function correctly. Without the correct precipitation and subsequent blow down of hardness salt, scale would form. This would result in restriction in water flow, ineffective heat transfer and local corrosion. The end effect would be an inefficient boiler and ultimately component failure. RXSOL-50-5002-025 also provides the alkaline condition required for corrosion control, by neutralization of acidic gases

Dosage
<p style="text-align: justify"> For optimum results dose <strong>RXSOL-50-5002-025 </strong>direct to the boiler with a RXSOL Boiler Water Treatment Dosing unit, or via the bypass pot- feeder installed in the boiler feed line.</p> <p style="text-align: justify"> Required dosage can be controlled by pH & alkalinity test dosage chart .  <br /> <br /> <em><span style="font-size:16px;">1 milliliter of <strong>RXSOL-50-5002-025</strong> concentrated alkaline liquid per ton of distilled water provides 0.5 ppm of lkalinity hydrate.</span></em></p> <p> <strong>Low-pressure boiler (up to 28 bars)</strong></p> <p> Add RXSOL-50-002-025 to 5 litre in feed – water, There is no any specific method can be passed through the recalculating or the main feed pipe into the stream or the hot well tank.</p> <p> <strong>High – Pressure Boiler (28 to 60 bars)</strong></p> <p> Dissolve the desired volume of RXSOL-50-002-025 to 5 ltr of feed – water, which should then be passed  into the stream or water drum through the chemical pump.</p> <p style="text-align: justify;">  <br /> <span style="font-family: georgia, serif;"><strong>Note:- </strong></span><span style="font-family: georgia, serif;">It can also be used as a neutralizing agent following acid cleaning with  descaling materials ( RXSOL-11-1008--DC descaling Liq / RXSOL-54-1008-SA Safe Acid PWD ) </span></p>
Technical Specification

Testing control procedure

  1. Test water sample from the water boiler as described in the direction of the  Alkalinity Test Kit ( p & m Total ) http://www.rxmarine.com/Alkalinity-test-kit
  2. Determine the present alkalinity value expressed as ppm CaCO3 .
  3. Desired level of 100-150 ppm as CaCO3.
  4. A control test for the alkalinity  of the water should be conducted after 3- 6 hours from the application.
MSDS

Product Name : RXSOL-50-5002-025
Product Type : ALKALINITY CONTROL 25 Ltr

 Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Surat, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat

Phone : +91 22 27815541 / 42
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com

Chemical Name

Concentration

CAS Number

EC Number

R Phrases*

Symbols

Metalic hydroxide which includes Sodium Hydroxide

27 - 36

1310-73-2

215-185-5

35

C

Non classified  ingredients
Proprietory Blend of Polymer

64-73

These products are not classified as hazardous and lower then hazard limits 

NA

NA

NA

*See Section 16

corrosive

Corrosive

Odour

Odourless.

Appearance

Liquid, colourless to yellow, soluble in water.

Contact with eyes 

Corrosive to eyes Can cause damage to the eyes.

Contact with skin

Causes severe burns (R35).

Inhalation

No information available but must be considered harmful.

Ingestion

Harmful if swallowed (R22).

Contact with skin

Remove contaminated clothing immediately and drench affected skin with plenty of water Then wash with soap and water.Seek medical advice if necessary

Contact with eyes

If the substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes. Irrigate eyes thoroughly whilst lifting eyelids.Obtain immediate medical attention. Continue flushing with water until medical help arrives

Ingestion

Do not induce vomiting.Never give anything by mouth to an unconscious person.Give water or milk to drink.Obtain immediate medical attention.

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where    possible) (S45) -When in doubt or symptoms persist, seek medical attention

-   Non-combustible
-   Smoke from fires is corrosive
-   Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
-   Vapour density - not applicable

Personal Precautions

Wear protective clothing as per section 8.

Environmental Precautions

Do not flush spilt material into any public water system.

Clean Up Actions

Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pickup is complete.Neutralise with Acid.

Special Precautions

Wear protective clothing as per section 8.

Handling

Eyewash bottles should be available.See Section 8

Storage

Keep only in the original container in a cool, well-ventilated place (S3/9/49).Protect from frost.

Exposure Limits

OES / LTEL # ppm  2 mg/m3.(Sodium hydroxide)

Exposure controls

No special ventilation is required unless the product is used in a spray form

Occupational exposure controls

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended).During fumigation/spraying wear suitable respiratory equipment (S42)

gloves        suit           goggles         no_smoking

         Gloves                Suit               Goggles          No_Smoking

Odour

Odourless

Appearance

Liquid, colourless to yellow, soluble in water

PH

11.5 - 12.5 at 0.1 % concentration , Neat : 14.0

Boiling point

100 °C at 760 mm /Hg

Vapour pressure

Not known

Vapour density

Not applicable

Freezing point

0 °C at 760 mm/Hg

Completely soluble in water 

Specific gravity

(water=1) 1.50

Non-combustible

-   This article is considered stable under normal conditions
-   Avoid overheating, Keep away from frost
-   Incompatible with acid
-   See Section 5

Toxicological information

The ingestion of significant quantities may cause burning sensation.Can cause damage to the digestive system.

 Inhalation

Not regarded as a potential route of exposure. Can cause damage to the respiratory system.

Contact with skin

Causes severe burns (R35)

Contact with eyes

Causes severe burns (R35)

Ingestion

The ingestion of significant quantities may cause damage to the digestive system.

Carcinogenicity

No evidence of carcinogenic effects.

Ecotoxicity

May cause acute effects in the aquatic environment.

Mobility

Completely soluble in water.

Persistence  and Biodegradability

Degrades by hydrolysis

Bioaccumulation Potential

Bioaccumulation is insignificant

Other Adverse Effects

No environmental problems are expected when the product is used/handled correctly.  In its intended use, the product will not be released into the environment.

Classification

This material and/or its container must be disposed of as hazardous waste.EU Waste class: 06 02 02

Disposal considerations

Do not discharge into drains or the environment, dispose to an authorised waste collection point.Disposal should be in accordance with local, state or national legislation

 Proper Shipping Name:
 UN        
  Proper Shipping Name Sodium hydroxide. solution    
  UN NO.  1824     
  Hazard Class  Packing Group  II 
Road/Rail (ADR/RID) 
  Proper Shipping Name  Sodium hydroxide. solution    
  ADR UN No.  1824     
  ADR Hazard Class  Termcard  80S1824 
Sear (IMDG) 
  Proper Shipping Name  Sodium hydroxide. solution     
  IMDG UN No.  1824    
  IMDG Hazard Class IMDG Pack Group  II
  IMDG EmS  F-A, S-B  IMDG subrisk  NA 

Air(ICAO/IATA) 

  ProperShippingName: 

Sodiumhydroxide, solution 

   
  ICAO UnNo.:  1824     
  ICAO HazardClass.:  ICAO PackingGroup.: II 
  ICAO subrisk: 

N/A 

ICAO Labels  8, CAO 
  ICAO Flashpoint: 

N/A 

   
DOT/CFR(USDepartment ofTransportation 
  DOTProperShippingName:  Sodium hydroxide, solution     
  hazardous material  Sodium hydroxide     
  Hazard Class:  IdentificationNumber:  UN1824
  Product RQ (lbs):  3640  DOTsubrisk: 

N/A 

  DOTLabels:  DOTFlashpoint:  N/A 

Risk Phrases

Causes severe burns (R35)

Safety Phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26).Wear suitable protective clothing, eye/face protection (S36/39).In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)

The text of R and S phrase codes used in this safety data sheet:-  R35: Causes severe burns.The information provided about the product on this Safety Data  Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties.The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications  -  usage in such may cause risks not mentioned in this sheet.  Do  not  use  for  other application(s) without seeking advice from manufacture This Safety Data Sheet  is  provided in compliance with The Dangerous Substances  Directive (67/548/EEC) This Safety Data Sheet is provided in  compliance with The Dangerous Preparations Directive (88/379/EEC) This  Safety  Data  Sheet  is  provided  in  compliance  with  The  Safety Data Sheets Directive (2001/58EC)

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.