Skip to main content
Drag

Fluorosil Odor Neutralizer Floral

Clean Air deodorizer

Fluorosil Odor Neutralizer Floral

Part No RXSOL-41-8524-025

Rxsol Tex Additive is a sodium asphalt sulfonate made water soluble by a unique sulfonation process.

Overview

RXSOL Tex Additive is a sodium asphalt sulfonate made water soluble by a unique sulfonation process. It is a versatile, total mud conditioner that stabilizes shale formations, significantly increases lubricity, and lowers HTHP water loss. Rxsol Tex Additive enhances filter cake properties in both oil-based and water-based muds. Due to  unique chemistry of Rxsol Tex Additive has delivered extraordinary results in both water-based and oil-based muds.

Application

Use for stablize shale formations, significantly increases lubricity, and lowers HTHP water loss.

Dosage

Mixing : Conventional hopper when chlorides do not exceed 60,000 ppm. When adding to high salinity systems, pre-wetting Rxsol Tex Additive  with fresh water by adding through chemical barrel may give best results.

DOSE : According to application below deose are recomended -

Application Dose
Stabilize shale formations 3.0 to 6.0 ppb (9.0 to 17.0 kg/m3)
Impart significant lubricity 1.0 to 3.0 ppb (3.0 to 9.0 kg/m3)
Reduce torque and drag 1.0 to 3.0 ppb (3.0 to 9.0 kg/m3)
Control HTHP fluid loss in water base
& oil base Mud
2.0 to 6.0 ppb (6.0 to 17.0 kg/m3)
Produce strong compressible wall cakes 2.0 to 4.0 ppb (6.0 to 11.0 kg/m3)
Emulsify oil into water based mud systems 0.5 to 3.0 ppb (2.0 to 9.0 kg/m3)
Control shear strengths and increase
thermal stability
2.0 to 6.0 ppb (6.0 to 17.0 kg/m3)
General hole conditioning 2.0 to 6.0 ppb (6.0 to 17.0 kg/m3)
 
Technical specification
 
Physical state : Solid
Color : Black
Odor : No odor
Flash point : Not applicable
Lower explosion limit : No data available
Upper explosion limit : No data available
Oxidizing properties : No
Autoignition temperature : Not applicable
Molecular formula : Mixture
Molecular Weight : No data available
pH : Not applicable
Pour point : Not applicable
Boiling point/boiling range : Not applicable
Vapor pressure : Not applicable
Relative density : 1.2 - 1.5
Water solubility : Partly soluble
Partition coefficient: n-octanol/water : No data available
Viscosity, kinematic : Not applicable
Relative vapor density : Not applicable
Evaporation rate : Not applicable
 

Safety data sheet (MSDS)

The MSDS for Fluorosil Odor Neutralizer Floral is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.

Request MSDS