FRP Vessels
Part No: RXSOL-32-1548-001
Single component rust neutralizing system giving excellent adhesion to subsequent painting materials . on applying to metal surface it penetrates through and chemically reacts with the rust on the surfaces and forms a fine coherent film of protectiv
Anti Rust Chemical – Effective Rust Prevention & Corrosion Protection
Anti Rust Chemical is a specialized corrosion-control solution designed to protect ferrous and other suitable metal surfaces from rust, oxidation, and atmospheric corrosion. Anti-rust chemicals are widely used in marine, automotive, engineering, manufacturing, oil & gas, construction, machinery, and industrial maintenance applications.
Rust develops when iron or steel comes into contact with moisture and oxygen, particularly in the presence of salts, acids, and other corrosive contaminants. Using an appropriate anti-rust chemical can help create a protective barrier or chemically inhibit corrosion, extending the service life and maintaining the appearance and performance of metal equipment.
How Does Anti Rust Chemical Work?
Corrosion occurs when metal reacts with oxygen and moisture. An effective anti-rust formulation can interfere with this process through one or more mechanisms.
Protective Film Formation
Many anti-rust chemicals form a thin protective layer on the metal surface. This barrier helps reduce direct contact between the metal, water, oxygen, and corrosive contaminants.
Moisture Displacement
Certain formulations displace moisture from metal surfaces, helping prevent the formation of the water layer required for corrosion.
Corrosion Inhibition
Specialized corrosion inhibitors can reduce the electrochemical reactions that cause metal oxidation and rust formation.
Surface Passivation
Some chemical treatments help create a more stable surface condition that reduces the tendency of the metal to corrode.
Single component rust neutralizing system giving excellent adhesion to subsequent painting materials. on applying to metal surface it penetrates through and chemically reacts with the rust on the surfaces and forms a fine coherent film of protective coating on the surface which also serves as an excellent base for the primer.
Application
What is Anti Rust Chemical?
Anti Rust Chemical refers to a range of formulations designed to prevent or slow down corrosion and rust formation on metal surfaces.
Depending on the application, anti-rust products may be formulated as water-based solutions, oil-based corrosion inhibitors, solvent-based protective coatings, vapour-phase corrosion inhibitors, or temporary rust-prevention treatments.
These products may work by forming a protective film over the metal surface, displacing moisture, passivating the metal, or inhibiting the electrochemical reactions responsible for corrosion.
Dosage
Application Methods
Anti-rust chemicals may be applied by:
-
Spraying
-
Brushing
-
Dipping
-
Wiping
-
Circulation
-
Immersion
-
Fogging or vapour-phase application for suitable products
The surface should generally be clean and free from loose rust, oil, grease, salt, and other contaminants before treatment unless the specific product is designed for application over existing corrosion.
Always follow the manufacturer's recommended concentration, contact time, application method, and drying procedure.
Technical Specification
Benefits of Anti Rust Chemical
A suitable Anti Rust Chemical can offer several benefits:
-
Helps prevent rust formation
-
Reduces atmospheric corrosion
-
Protects ferrous metal surfaces
-
Helps extend equipment service life
-
Suitable for temporary or long-term protection
-
Can be used during storage and transportation
-
Available in different formulation types
-
Helps reduce maintenance requirements
-
Supports preservation of machinery and spare parts
MSDS
| Product Name | RXSOL-18-1050-025 |
| Product Type | Anti Rust Chemical |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kandla Surat, Kolkata, Chennai, Vizag, Fujairah, Muscat
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail @ rxmarine.com |
| Chemical Name | CAS No. | Approx. wt.% | Exposure |
| Vinyl Copolymer | N/E | 30-60% |
ACGIH-TLV -N/E OSHA-PEL-N/E |
| Tannic Acid | 1401-55-4 | 1-10% |
ACGIH-TLV-N/E OSHA-PEL- N/E |
| *2-Butoxyethanol | 111-76-2 | 1.7% | ACGIH-TLV -50 ppm (Skin) OSHA-PEL -20 ppm |
| RCRA REGULATED | No |
| CERCLA (superfund) | N/A |
| ALL MATERIALS IN PRODUCT ARE TSCA LISTED. | |
| DOT Regulated | No |
| DOT Haz. Class | N/A |
| DOT Shipping Name | N/A |
| DOT Number | N/A |
|
SUMMARY OF ACUTE HAZARDS |
Irritation to eyes, nose, and throat; drowsiness, narcosis, tremors, and other CNS effects at high concentrations. Skin irritation, dermatitis, and defatting. |
| ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS | |
|
INHALATION |
Nasal and respiratory irritation, dizziness, narcosis, headache, nausea, CNS depression, and unconsciousness. |
|
EYE CONTACT |
Watering, blurred vision, inflammation, and irritation which can result in |
|
SKIN CONTACT |
Irritation, dermatitis. |
| INGESTION |
Nausea, vomiting; CNS depression; irritation of gastrointestinal tract, liver and peritoneal wall; lung congestion. |
| SUMMARY OF CHRONIC HAZARDS | Skin irritation, contact dermatitis, and defatting. |
| MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE |
Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure. |
|
If INHALED |
If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. |
|
If on SKIN |
Immediately wash with soap and water. Remove and wash any contaminated clothing. |
|
If in EYES |
Flush eyes with large amounts of water for 15 minutes. Get medical attention if irritation persists. |
|
If SWALLOWED |
If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. |
Section IV: Fire and Explosion Hazard Data
| Flash Point (Method) Bulk Liquid (TCC) | None |
| Flammable Limits | N/A |
| Extinguishing Media | N/A |
| Special Fire Fighting Procedures | N/A |
| Unusual Fire & Explosion Hazards | N/A |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Remove all sources of ignition. Use absorbent materials to prevent footing hazard and to contain. Ventilate area with natural or explosion-proof, forced air ventilation. Avoid flushing into sewers, drains, waterways, and soil. Wear protective clothing and respiratory protection during cleanup. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Shake well before using. Keep away from heat, sparks and open flames. |
| OTHER PRECAUTIONS | Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
In confined, poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air respirators during soldering operations until fumes have dissipated. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear rubber gloves. |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Chemical resistant coveralls |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
Section III: Physical Data
| Appearance & Odor | Opaque, white, slightly viscous liquid with a very slight "vinyl" odor. |
| Boiling Point | 218° F |
| Evaporation Rate (Water=1) | 1 |
| pH | 2 |
| Solubility In Water | Dispersible |
| Specific Gravity | 1.290 |
| Vapor Density (AIR=1) | N/A |
| Vapor Pressure | Approx. 17 mm Hg |
| VOC Content | 22 grams/liter |
|
Flash Point (Method) |
Bulk Liquid (TCC) None |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
Oxidizers, acids and bases. |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
CO, CO, and fragmented hydrocarbons. |
|
HAZARDOUS POLYMERIZATION |
Will not occur |
| CHRONIC HEALTH HAZARDS |
No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
|
Ingredient Name |
Oral-Rat LD50 |
Inhalation-Rat LC50 |
|
lauryl dimethyl amine oxide |
4.3 mg/kg | N/D |
|
Polylene Glycol Butyl Ether |
N/D |
N/D |
|
Sodium Metasilicate |
1153 mg/kg |
N/D |
|
Ingredient Name |
Food Chain Concentration Potential |
WATERFOWL TOXICITY | BOD | AQUATIC TOXICITY |
|
lauryl dimethyl amine oxide |
N/D | N/D | N/D | N/D |
|
Polylene Glycol Butyl Ether |
N/D |
N/D | N/D | N/D |
|
Sodium Metasilicate |
N/D |
N/D | N/D | N/D |
|
Waste Classification |
Non-regulated liquid waste |
| Disposal Method | Dispose of all liquid waste in accordance with all local, state and federal regulations. |
|
DOT |
Non-Regulated |
| OCEAN | Non-Regulated |
| AIR | Non-Regulated |
NA
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.