Kitchen Cleaner 500Ml

Anti Rust Liquis Solution  is used on ferrous surfaces as a rust inhibiting treatment to protect parts during in-plant storage or handling. Steel components continually immersed in aqueous solutions of Anti Rust Liquis Solution will not rust. Anti Rust Liquis Solution  is valuable as a rust inhibiting rinse removal of rust or scale. It can also be added to neutralising baths after acid pickling.

OTHER TYPICAL APPLICATIONS

• Thin film coating for dry storage of:
• Castings, tubular parts, finished parts, gears
• Pumps and housings
• Textile and printing equipment
• Structural steel, sintered metals
• Bars and roll stock
• Additive to parts washers and rinse water systems
• Hydroblasting and hydrotesting.
• Spare parts, tools.

Anti Rust Liquis Solution is used in rinse tanks or soak tanks as the final treatment step prior to storage, circulating in system, pipe line, spare parts. Parts should not be rinsed  removal from Anti Rust Liquis Solution.

Concentration:               2% - 5% v/v
Temperature :               Ambient - 80°C. Elevated temperatures facilitate quick drying of parts upon removal.
Method:                         Immersion or spray.
Tank Construction:        Mild steel

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA  

Stock Point ::: Mumbai, Kandla Surat, Kolkata, Chennai, Vizag, Fujairah, Muscat

Milky, light tan liquid with a red tinge. Negligible odor.

EMERGENCY OVERVIEW:
May cause mild eye irritation. Prolonged skin contact may cause irritation or dermatitis. Inhalation of high concentrations of vapors or mists may cause irritation of the nose and throat and headache, nausea or drowsiness.

Wear appropriate protective clothing and equipment (See Section 8). Recover free product by pumping or collect with absorbent material and place in appropriate, labeled container for disposal. Keep out of sewers, watercourses and low areas.

Avoid eye and prolonged skin contact.
Avoid breathing vapors, mists or fumes.
Wash exposed skin thoroughly with soap and water after use.
Empty containers retain product residue and may be hazardous.
Do not cut, weld, drill, etc. containers, even empty.
Do not reuse empty containers unless properly cleaned.

NFPA CLASSIFICATION:
Not Applicable

VENTILATION:
General ventilation should be adequate for normal use. For operations where the exposure limit may be exceeded, local exhaust ventilation may be required to maintain exposures below the occupational exposure limits.

RESPIRATORY PROTECTION:
None under normal use conditions. For operations where the TLV for oil mist may be exceeded, a NIOSH approved respirator with an organic vapor cartridge and a dust/mist prefilter or supplied air respirator is recommended. Equipment selection depends on contaminant type and concentration. Select in accordance with 29 CFR 1910.134 and good industrial hygiene practice. For firefighting, use self-contained breathing apparatus.

GLOVES:
Neoprene gloves where prolonged contact is likely.

EYE PROTECTION:
Safety glasses with sideshields or goggles are recommended.

OTHER PROTECTIVE EQUIPMENT/CLOTHING:
Appropriate protective clothing as needed to minimize skin contact.
 

 Information on basic physical and chemical properties:

No ecotoxicity data is available for this product or its components at this time.

Dispose in accordance with all local, state/provincial and federal regulations.

IMDG CODE SHIPPING CLASSIFICATION:

CANADIAN TDG CLASSIFICATION:

The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.