METHYL RED SODIUM SALT ACS GRADE
Part No RXSOL-69-8451-030
pH indicator or indicator dye. It works by turning Red for pH levels under 4.4 and Yellow over 6.2
Overview
METHYL RED SODIUM SALT ACS GRADE excellent quality manufacturer, exporter and supplier. Methyl Red Sodium Salt ACS Grade is a pH indicator or indicator dye. It works by turning Red for pH levels under 4.4 and Yellow over 6.2. It becomes orange with a varying spectrum of shade intensities between those two levels. It comes in the form of a rich red crystalline powder.
RXSOL Methyl Red Sodium Salt – Laboratory pH Indicator & Analytical Reagent
Product Name: Methyl Red Sodium Salt
Brand: RXSOL – RX Marine International
Product Category: Laboratory Chemicals / Analytical Reagents / pH Indicators
Chemical Formula: C₁₅H₁₄N₃NaO₂
CAS Number: 845-10-3
Molecular Weight: 291.28 g/mol
Product Description
RXSOL Methyl Red Sodium Salt is a water-soluble azo dye used primarily as an acid-base indicator in analytical chemistry, laboratory testing, chemical analysis and educational applications.
It is the sodium salt form of methyl red, a widely used pH indicator that changes colour according to the acidity or alkalinity of a solution.
Methyl Red Sodium Salt is particularly useful for monitoring pH changes in the acidic range and is commonly employed in volumetric analysis, titration procedures, laboratory research and microbiological testing.
Unlike conventional methyl red, which has limited water solubility, its sodium salt form offers improved dissolution in aqueous solutions, making it convenient for preparing laboratory indicator solutions.
Application
Typical Quality Control Parameters
|
Test |
Reference Criterion |
|---|---|
|
Appearance |
Orange to Brown powder |
|
Identity |
Conforms to reference standard |
|
Solubility |
Clear 0.1% aqueous solution |
|
Visual Transition |
Approximately pH 4.2–6.2 |
|
Loss on Drying |
Maximum 5%, for selected reagent grades |
|
Dye Content |
Grade-specific |
|
Packaging |
Laboratory reagent bottles |
These are reference criteria from commercial reagent specifications, not certified RXSOL results.
Dosage
Preparation of 0.1% Methyl Red Sodium Salt Indicator Solution
For a general laboratory stock solution:
|
Ingredient |
Quantity |
|---|---|
|
Methyl Red Sodium Salt |
0.10 g |
|
Distilled or Deionized Water |
Make up to 100 mL |
Preparation: Dissolve the weighed powder in approximately 80 mL of distilled water, mix until dissolved, then make up to 100 mL. Label the solution and verify its colour response against appropriate pH buffers before use.
This is a general 0.1% w/v aqueous preparation. Use the concentration, solvent and storage period specified by the applicable analytical method.
Technical specification
| C.A.S. No. | 845-10-3 |
| CI NO. | 13020 |
| M.F. | C15H14N3O2Na |
| M.W. | 291.29gm/mole |
Specifications:
|
Standard Technical Specifications
|
Parameter |
Typical Description |
|---|---|
|
Chemical Name |
Methyl Red Sodium Salt |
|
CAS Number |
845-10-3 |
|
Molecular Formula |
C₁₅H₁₄N₃NaO₂ |
|
Molecular Weight |
291.28 g/mol |
|
Appearance |
Dark red to reddish-brown powder |
|
Chemical Class |
Azo Dye |
|
Solubility |
Soluble in water |
|
Indicator Transition Range |
pH 4.4–6.2 |
|
Colour in Acidic Solution |
Red |
|
Colour in Alkaline Solution |
Yellow |
|
Primary Use |
Acid-base indicator |
|
Storage |
Tightly closed container, protected from moisture and excessive heat |
These are typical reference properties. Final RXSOL specifications, assay and packaging should be confirmed from the applicable batch COA.
Safety data sheet (MSDS)
The MSDS for METHYL RED SODIUM SALT ACS GRADE is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.