Skip to main content
Drag

Mould Lubrication Oil

Drilling Fluids & Mud Oil Field chemicals

Mould Lubrication Oil

Part No RXSOL-81-1020-210

Penetrating Oil A very strong cleaner, which can be used to soften up / remove baked on drying oils and Hard coke asphaltic deposition etc. It is low toxic product with an exceptional solvency power on soil & oily matter . It is minimizes the…

Overview

RXSOL Mould Lubrication Oil is a specially formulated industrial lubricant designed to provide effective lubrication between mould surfaces and the material being processed. It forms a thin, uniform lubricating film that helps minimize friction, sticking and material adhesion during moulding operations.

The product facilitates smooth mould release, reduces surface defects and helps maintain the cleanliness of mould surfaces. Its lubricating properties help reduce wear caused by repeated moulding cycles and contribute to improved operational efficiency.

It is suitable for industrial moulding applications where controlled lubrication and easy release of finished products are required.

Application

Areas of Application

  • Industrial mould lubrication.
  • Concrete moulds and formwork applications, subject to substrate compatibility.
  • Precast concrete moulds.
  • Cement product manufacturing.
  • Industrial casting and moulding operations.
  • Mould surfaces requiring lubrication and release assistance
Dosage

How to use Mould Lubrication Oil?

Step 1 - Surface Preparation

  • Ensure the mould surface is clean and free from concrete deposits, dust, rust and other contaminants.
  • Remove any residual hardened material before applying the lubricant.

Step 2 - Application

  • Apply RXSOL Mould Lubrication Oil directly onto the mould surface using a spray gun, brush, roller or clean cloth.
  • Spread evenly to form a thin, continuous lubricating film.
  • Avoid excessive application and accumulation of oil in corners or depressions.

Step 3 - Moulding Operation

  • Allow the applied film to distribute uniformly over the mould surface.
  • Proceed with the moulding or casting operation as per the production process.
  • Ensure that excess oil is removed before introducing the moulding material.

Step 4 - Maintenance

  • Clean the mould after each production cycle, where necessary.
  • Reapply the lubricant before the next moulding operation.
Technical specification

Parameter

Specification

Test Method

Appearance

Clear, homogeneous liquid

Visual

Colour

Pale yellow to amber

Visual

Odour

Mild petroleum odour

Organoleptic

Density @ 15°C

0.850-0.890 g/cm³

ASTM D4052

Specific Gravity @ 15°C

0.850-0.890

ASTM D4052

Solubility in Water

Insoluble

Visual

Corrosive Properties

Non-corrosive under normal application conditions

ASTM D130

Safety data sheet (MSDS)

The MSDS for Mould Lubrication Oil is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.

Request MSDS