Lab Equipment-61
Nessler tube 100 Ml without stropper
Part No: RXSOL-61-2823-001
TRI CHLORO ETHANE 1,1,2
Application
| PRODUCT NAME | : | TRICHLOROETHANE (1,1,2-) |
| CAS number | : | 79-00-5 |
| UN number | : | |
| Formula | : | CH3CCI3 |
| Odour | : | SWEETISH, CHLOROFORM LIKE |
| Solubility in water | : | INSOLUBLE |
| Density | : | 1.443 at 20 oC |
| Boiling point | : | 113 oC |
| Melting point | : | -35 oC |
| Viscosity | : | |
| Flashpoint | : | |
| Explosive limits | : | |
| Vapour pressure | : | 25 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 10 S ppm 45 S mg/m3 |
| Pollution category 1994 | : | C |
Dosage
MSDS
| Product Name | TRI CHLORO ETHANE 1,1,2 |
| Part Number | RXSOL-19-1455-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| 123 @ rxmarine.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EC Number | Weight % |
| 1,1,2-Trichloroethane | 79-00-5 | 201-166-9 | 99 - 100% |
| Signal Word | Warning |
| Hazard Statements |
H411 Toxic to aquatic life with long lasting effects. H420 Harms public health and the environment by destroying ozone in the upper atmosphere. |
| Precautionary statements - prevention |
P201 - Obtain special instructions before use. P262 - Do not get in eyes, on skin, or on clothing. P271 - Use only outdoors or in a well-ventilated area. P273 - Avoid release to the environment. P280 - Wear protective gloves/ protective clothing/ eye protection/ face protection. |
| Precautionary statements - response |
P302 + P350 - IF ON SKIN: Gently wash with plenty of soap and water. P309 + P311 - IF exposed or if you feel unwell: Call a POISON CENTER or doctor/ physician. |
| Skin Contact | Wash off immediately with plenty of water for at least 15 minutes. Immediate medical attention is required. |
| Eye Contact | Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.Immediate medical attention is required. |
| Inhalation: | Remove from exposure, lie down. Move to fresh air. If breathing is difficult, give oxygen. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Immediate medical attention is required. |
| Ingestion: | Do not induce vomiting. Call a physician or Poison Control Center immediately |
| Most important symptoms/effects | No information available |
| Notes to Physician | Treat symptomatically |
| Flammability of the Product | May be combustible at high temperature. |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | No information available |
| Flash Point | No information available |
| AutoignitionTemperature | 459 °C / 858.2 °F |
| Explosion Limits Uper | 15.5% |
| Explosion Limits Lower | 6% |
| Sensitivity to Mechanical Impact | No information available |
| Sensitivity to Static Discharge | No information available |
| Specific Hazards Arising from the Chemical | Vapors may form explosive mixtures with air. Non-combustible. Thermal decomposition can lead to release of irritating gases and vapors. Keep product and empty container away from heat and sources of ignition |
| Hazardous Combustion Products | Hydrogen chloride gas Carbon monoxide (CO) Carbon dioxide (CO2) Chlorine Phosgene |
| Protective Equipment and Precautions for Firefighters | As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. |
| Further Information | Prevent fire extinguishing water from contaminating surface water or the ground water system. Suppress (knock down) gases/vapours/mists with a water spray jet. |
| Spillage |
Absorb with an inert material and put the spilled material in an appropriate waste disposal. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities. |
| Personal Protection | Advice for non-emergency personnel: Do not breathe vapours, aerosols. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
| Enviromental Precaution | Do not empty into drains. |
| Methods and materials for containment and cleaning | Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. Provide adequate ventilation. Avoid dust formation. Use spark-proof tools and explosion-proof equipment. |
| Handling | Wear personal protective equipment. Ensure adequate ventilation. Avoid contact with skin and eyes. Do not breathe dust. Do not breathe vapors or spray mist. Do not ingest. Use only in area provided with appropriate exhaust ventilation. |
| Storage | Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents. |
| Hygiene measures | Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance. |
| Engineering Control | Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location. |
| Personal Protection |
Eye/face Protection Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. |
| Hygiene Measures | Handle in accordance with good industrial hygiene and safety practice. |
| Exposure Limits | TWA: 10 (ppm) from OSHA (PEL) SKIN TWA: 55 (mg/m3) from ACGIH SKIN Consult local authorities for acceptable exposure limits |
Gloves Suit
| Form | Liquid |
| Colour | Clear |
| Odour | Sweet |
| Odor Threshold | No Information Available |
| pH | No Information Available |
| Melting Point | -37 °C / -34.6 °F |
| Boiling Point | 110 - 115 °C / 230 - 239 °F @ 760 mmHg |
| Flash Point | No Information available |
| Evaporation Rate | No information available |
| Flammability (solid, gas) | No information available |
| Explosive limits |
Upper 15.5% Lower 6.00 % |
| Vapour pressure | 20 @ 25 mbar °C |
| Vapour Density | 4.63 (Air = 1.0) |
| Secific Gravity | 1.430 |
| Solubility | 4 g/L @ 20 °C |
| Partition coefficient | No data available |
| Autoignition Temperature | 459 °C / 858.2 °F |
| Decomposition Temperature | No information available |
| Viscosity | 1.69 cP at 25 °C |
| Molecular Formula | C2 H3 Cl3 |
| Molecular Weight | 133.4 |
| Recativity Hazard | None known, based on information available |
| Stability | table under normal conditions. Conditions to Avoid Excess heat. Incompatible products. |
| Possibility of hazardous reactions | Risk of explosion with:, Violent reactions possible with Alkali metals, Alkaline earth metals, Aluminium, Powdered metals, sodium amide |
| Conditions to avoid | Excess heat. Incompatible products |
| Incompatible materials | Bases, Strong oxidizing agents, Strong bases, Metals. |
| Hazardous Decomposition Products | Products Hydrogen chloride gas, Carbon monoxide (CO), Carbon dioxide (CO2), Chlorine, Phosgene |
| Hazardous Polymerization | Hazardous polymerization does not occur. Hazardous Reactions None under normal processing. |
| Acute toxicity |
LD50 Rat: 43,000 mg/kg (IUCLID) LC50 Rat: 299.33 mg/l; 4 h (RTECS) |
| Acute dermal toxicity | No information Available |
| Skin corrosion | Repeated or prolonged exposure may cause skin irritation and dermatitis, due to degreasing properties of the product. |
| Toxic Effects on Humans | Hazardous in case of skin contact (irritant). |
| Special Remarks on Chronic Effects on Humans | Not Available |
|
Further information After absorption: |
The following applies to aliphatic halogenated hydrocarbons in general: systemic effect:narcosis, cardiovascular disorders. Toxic effect on liver, kidneys. Further hazardous properties cannot be excluded but unlikely when the product is handled appropriately. Handle in accordance with good industrial hygiene and safety practice. |
| Toxicity to Fish | LC50 Danio rerio (zebra fish): 7 - 14 mg/l; 96 h DIN 38412 (IUCLID) |
| COD and BOD 5 | Not Available |
| Products of Biodegradation: | Aerobic, Tested according to: ready biodegradability/MITI, , 5 % after 28 d Result: Not readily biodegradable. |
| Mobility in soil | No Information Available |
| Results of PBT and vPvB assessment | PBT/vPvB assessment not available as chemical safety assessment not required/not conducted. |
| Other adverse effects | Henry constant 39700 Pa*m³/mol Distribution preferentially in air. |
| Waste treatment Method | Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself |
DOT
| UN Number | UN2810 |
| Proper shipping name | 1,1,2-TRICHLOROETHANE |
| Hazard Class | 6.1 |
| Packing group | III |
TDG
| UN Number | UN2810 |
| Proper shipping name | 1,1,2-TRICHLOROETHANE |
| Hazard Class | 6.1 |
| Packing group | III |
IATA
| UN Number | UN2810 |
| Proper shipping name | 1,1,2-TRICHLOROETHANE |
| Hazard Class | 6.1 |
| Packing group | III |
IMDG/IMO
| UN Number | UN2810 |
| Proper shipping name | 1,1,2-TRICHLOROETHANE |
| Hazard Class | 6.1 |
| Packing group | III |
| Federal and State Regulations |
California prop. 65: This product contains the following ingredients for which the State of California has found to cause cancer, birth defects or other reproductive harm, which would require a warning under the statute: 1,1,2-Trichloroethane California prop. 65 (no significant risk level): 1,1,2-Trichloroethane: 0.01 mg/day (inhalation) California prop. 65: This product contains the following ingredients for which the State of California has found to cause cancer which would require a warning under the statute: 1,1,2-Trichloroethane Rhode Island RTK hazardous substances: 1,1,2-Trichloroethane Pennsylvania RTK: 1,1,2-Trichloroethane Florida: 1,1,2-Trichloroethane Minnesota: 1,1,2-Trichloroethane Michigan critical material: 1,1,2- Trichloroethane Massachusetts RTK: 1,1,2-Trichloroethane New Jersey: 1,1,2-Trichloroethane TSCA 8(b) inventory: 1,1,2- Trichloroethane TSCA 8(a) PAIR: 1,1,2-Trichloroethane SARA 313 toxic chemical notification and release reporting: 1,1,2- Trichloroethane CERCLA: Hazardous substances.: 1,1,2-Trichloroethane: 100 lbs. (45.36 kg) |
| Other Regulation | OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200). |
| WHMIS (Canada) | CLASS D-1B: Material causing immediate and serious toxic effects (TOXIC). |
| DSCL (EEC) | R22- Harmful if swallowed. R38- Irritating to skin. R41- Risk of serious damage to eyes. |
| HMIS | |
| Health Hazard | : 2 |
| Fire Hazard | : 1 |
| Reactivity | : 0 |
| Personal Protection | : j |
| Fire : | |
| Health Hazard | : 2 |
| Fire Hazard | : 1 |
| Reactivity | : 0 |
| Specific Hazard | : .... |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
|