RIGS Oil Field-34
Nutrient Solution TSP
Part No: RXSOL-34-1522-055
AEROSIL 200 RX is a hydrophilicfumed silica with a specificsurfacearea of 200 m2/g. Widelyusablein a broad rangeof applications.
AEROSIL 200 RX is a hydrophilicfumed silica with a specificsurfacearea of 200 m2/g. Widelyusablein a broad rangeof applications.
Application
Paints and coatings
● Unsaturated polyester resins, laminating resins and gel coates
● HTV and RTV2Ksilicone rubber
● Adhesives and sealants
● Printing inks
● Cable compounds and cable gels
● Plant protection
● Food and cosmetics
MSDS
| Product Name | AEROSIL 200 RX |
| Part No | RXSOL-81-8119-010 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Mumbai, Kandla, Chennai, Vizag,Kolkata,UAE,Oman,Kenya.
| Phone | +91 22 2087 1200-1400 |
| Fax | +91 22 2087 1500 :::AOH :0091 9821214367 |
| mail @ rxmarine.com | |
| Website | www.rxmarine.com |
| Camical Name | CAS No. | EC number | weight % |
| Aerosil 200 | Aerosil 200 | 234-394-2 | 100 |
| Other information | A new CAS , 112945-52-5, has been assigned to amorphous, fumed silica to distinguish it from crystalline silica. According to the EPA, this product meets TSCA requirements and is listed on the TSCA inventory as silica with CAS 7631-86-9 |
| Signal word | None |
| Label elements | Statutory basis/Remarks - Classification according to Regulation 29CFR 1910.1200 Not a hazardous substance or mixture. |
| Other hazards | Silicon dioxide, chemically preparedNot a PBT, vPvB substance as per the criteria of the REACH Regulation. |
| Inhalation : | In case product dust is released: Possible discomfort: cough, sneezing Move victims into fresh air. |
| Skin contact |
Wash off with soap and plenty of water.
contaminated clothing. Immediately call a POISON CENTER or doctor
|
| Eye contact | In case of contact, immediately flush eyes with plenty of water for at least 15 minutes or until all material has been removed. Obtain medical attention |
| Most important symptoms and effects, both acute and delayed | None known. |
| Indication of any immediate medical attention and special treatment needed | No hazards which require special first aid measures. |
|
|
| Extinguishing media |
Suitable extinguishing media : Water spray, foam, CO2, dry powder., Adapt fire-extinguishing measures to
Unsuitable extinguishing media : Do not use full-force water jet in order to avoid dispersal and spread of the fire.
Surrounding fires : Use water spray or fog for cooling exposed containers.
|
| Special hazards arising from the substance or mixture | None known. |
| Advice for fire-fighters | As in any fire, wear self-contained positive-pressure breathing apparatus, (MSHA/NIOSH approved or equivalent) and full protective gear.. |
| Personal precautions, protective equipment and emergency procedures | Use personal protective equipment. |
| For emergency responders | Equip cleanup crew with proper protection Ventilate area. |
| For non-emergency personnel | Evacuate unnecessary personnel. |
| Environmental precautions | Obey relevant local, state, provincial and federal laws and regulations. Do not contaminate any lakes, streams, ponds, groundwater or soil.Do not allow entrance in sewage water, soil stretches of water, groundwater, drainage systems. |
| Methods and material for containment and cleaning up | Sweep up or vacuum up spillage and collect in suitable container for disposal. |
| Reference to other sections | See section 8. Exposure controls/personal protection |
| Precautions for safe handling | Equip cleanup crew with proper protection Ventilate area. |
| Storage | Keep containers tightly closed in a dry, cool place |
| Handling |
Handle empty containers with care because residual vapours are flammable.
Wash thoroughly after handling. Avoid contact during pregnancy or while nursing. Do
not breathe dust, fume, gas, mist, vapours, spray. Take precautionary measures against
static discharge. Use only outdoors or in a well-ventilated area.
|
| Technical protective measures |
Provide good ventilation in process area to prevent
formation of vapour. Proper grounding procedures to avoid static electricity should be
followed. Use only non-sparking tools. Use explosion-proof electrical, ventilating,
lighting, …,equipment.
Special precautions : No naked lights. No smoking.
|
| Advice on protection against fire and explosion | Take precautionary measures against static discharges. |
| Advice on protection against fire and explosion | Take precautionary measures against static discharges. |
| Control parameters | Time Weighted Average |
| 20millions of particles per cubic foot of air | (TWA):(Z3) |
| 0.8 mg/m3 | (TWA):(Z3) |
The exposure limit is calculated from the equation, 80/(%SiO2), using a value of 100% SiO2. Lower values of % SiO2 will give higher exposure limits
| Respiratory protection | A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 or applicable federal/provincial requirements must be followed whenever workplace conditions warrant respirator use. NIOSH's "Respirator Decision Logic" may be useful in determining the suitability of various types of respirators. |
| Hand protection | Use impermeable gloves |
| Eye protection | Wear safety glasses with side shields. In case dusts are formed, wear close fitting protective goggles |
| Skin and body protection | A safety shower and eye wash fountain should be readily available. To identify additional Personal Protective Equipment (PPE) requirements, it is recommended that a hazard assessment in accordance with the OSHA PPE Standard (29CFR1910.132) be conducted before using this product. |
| Hygiene measures | When using, do not eat, drink or smoke. Wash face and/or hands before break and end of work. To ensure ideal skin protection: use super fatted soaps and skin cream for skin care. Wash contaminated clothing before re-use. |
| Protective measures | Handle in accordance with good industrial hygiene and safety practice. If there is the possibility of skin/eye contact, the indicated hand/eye/body protection should be used. If the workplace threshold limit value is exceeded and/or the substance is released, use appropriate respiratory protection |
| Physical state at 20 °C | Solid |
| Colour | White |
| Odour | Odorless |
| Form | Powder |
| Odour | Odorless |
| Odour threshold | Not applicable |
| pH value | 3.7 - 4.5 (40 g / l) (20 °C). |
| Melting point [°C | Ca. 1700 °C |
| Critical temperature | N/A |
| Boiling point/range | Not determined |
| Flash point | Not applicable |
| Evaporation rate | Not applicable |
| Flammability (solid, gas) | Not applicable |
| Lower explosion limit | Not applicable |
| Upper explosion limit | Not applicable |
| Vapour pressure | Not applicable |
| Vapour density | Not applicable |
| Density | ca. 2.2 g/cm3 (20 °C) |
| Water solubility | > 1 mg/l |
| Partition coefficient: noctanol/wate | Not applicable |
| Autoignition temperature | Not applicable |
| Thermal decomposition | > 2000 °C |
| Viscosity, dynamic | Not applicable |
| Other information | Explosiveness Not to be expected in view of the structure Minimum ignition energy not applicable Tapped density ca. 50 g / l Method: DIN / ISO 787/11 |
| Reactivity | No dangerous reaction known under conditions of normal use. |
| Chemical stability | Stable under recommended storage conditions. |
| Incompatible materials | None known. |
| Hazardous decomposition products | None known. Stable under normal conditions. Product will not undergo hazardous polymerization. |
| Acute oral toxicity | LD50 Rat: > 3300 mg/kg No deaths occurred. LD50 Rat: > 5000 mg/kg |
| Acute inhalation toxicity | LC0 Rat: 0.139 mg/l / 4 h Method: analogous OECD method (maximum concentration attainable in experiments) No deaths occurred. |
| Acute dermal toxicity | LD50 Rabbit: > 5000 mg/kg comparable product |
| Skin irritation | Rabbit not irritating Method: analogous OECD method |
| Eye irritation | Rabbit not irritating Method: analogous OECD method |
| Sensitization | Not known |
| Repeated dose toxicity | Oral No negative effects.Inhalation No irreversible changes and no indication of silicosis. |
| Assessment of STOT single exposure | No evidence for hazardous properties |
| Assessment of STOT repeat exposure | No evidence for hazardous properties |
| Carcinogenicity | No negative effects |
| Carcinogenicity assessment | Contains no carcinogenic substances as defined by NTP, IARC and/or OSHA |
| Toxicity to reproduction | No negative effects. |
| Human experience | Silicosis or other product specific illnesses of the respiratory tract have not been reported. |
| Toxicity information | Not established |
| Persistence - degradability | Biodegradable. |
| Bioaccumulative potential | Bioaccumulation Not to be expected. |
| Mobility in soil | No remarkable mobility in soil is to be expected. |
| Other adverse effects | The classification criteria are not met based on the available data. |
| Waste treatment methods | Waste must be disposed of in accordance with federal, state, provincial and local regulations. |
| Uncleaned packaging | Packaging material should be recycled or disposed of in accordance with federal, state and local regulations. |
| Special precautions |
Handle empty containers with care because residual vapours are
flammable.
|
.
| UN number | -- |
| UN proper shipping name | -- |
| Transport hazard class(es) | -- |
| Packing group | -- |
| Environmental hazards (Marine pollutant) | -- |
| Special precautions for user | Yes |
| OSHA | If listed below, chemical specific standards apply to the product or components:None listed |
| CERCLA Reportable Quantities | If listed below, a reportable quantity (RQ) applies to the product based on the percent of the named component: |
| SARA Title III Section 311/312 Hazard Categories | The product meets the criteria only for the listed hazard classes: |
| SARA Title III Section 313 Reportable Substances | If listed below, components are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: |
| Substance or mixture |
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
|
| State Regulations | The Listing requirements of the Right to Know (RTK) legislation varies by state. All information for NJ, PA, MA and other states can be derived from the listing of hazardous and non-hazardous components in section 2 and 15 of this MSDS. |
| California Proposition 65 | A warning under the California Drinking Water Act is required only if listed below: |
| HMIS Ratings |
Health : 1 Flammability : 0 Physical Hazard : 0 |
| NFPA Ratings |
Health : 1 Flammability : 0 Reactivity : 0 |
| Chemical Safety Assessment | Chemical Safety Assessment : It has not been carried out. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |