Skip to main content
Drag

OdorMaster

Ethyl acetate manufacturer and supplier on a large scale. Ethyl Acetate having low toxicity value, Due to this  most commonly used as a solvent in inks and paints and also as an extraction solvent. Ethyl Acetate easily dissolve the resin, control the viscosity and modify the drying rate. It can also be used as a gelling agent in the manufacture of powder, essences and perfumes. It is miscible in all proportions with common organic solvents.

Clean Air deodorizer-24

OdorMaster

Part No: RXSOL-41-8578-025

ETHYL ACETATE

Ethyl acetate manufacturer and supplier on a large scale. Ethyl Acetate having low toxicity value, Due to this  most commonly used as a solvent in inks and paints and also as an extraction solvent. Ethyl Acetate easily dissolve the resin, control the viscosity and modify the drying rate. It can also be used as a gelling agent in the manufacture of powder, essences and perfumes. It is miscible in all proportions with common organic solvents.

Application

Ethyl Acetate supplier and exporter from INDIA.

Synonyms Trade Name : Acetic Acid Ethyl Ester, Acetic Ether Acetoxyethane

Ethyl acetate from India for solvent based paint, varnish, primer, flexible packaging and adhesives etc.
 
Ethyl Acetate is an ester of Ethanol and Acetic Acid, ( systematically Ethyl Ethanoate, commonly abbreviated EtoAc or EA ) an organic compound having formula CH3COOCH2CH3. This colourless solvent has a characteristic sweet / fruity smell.
Dosage

Ethyl acetate is an effective poison for use in entomology as its vapours are a respiratory tract irritant which can kill the insects quickly.

Application 

 
Ethyl Acetate is used in a variety of coating formulations such as epoxies, urethanes, cellulosics, acrylics and vinyls. Applications for these coatings are numerous including wood furniture and fixtures, agricultural, construction and mining equipment, auto refinishing, and maintenance and marine uses. 
 
Ethyl Acetate has applications as a solvent in inks for flexographic and rotogravure printing. It is used as an extraction solvent in the production of pharmaceuticals and food, and as a carrier solvent for herbicides. High purity product can be used as a viscosity reducer for resins used in photoresist formulations in the electronics industry.
Technical Specification

Ethyl Acetate Supplier in India and UAE, Middle East

 
 PRODUCT NAME    : ETHYLACETATE
 CAS number   : 141-78-6
 UN number    : 1173
 Formula   : CH3COOC2H5
 Odour   : FRAGRANT
 Solubility in water    : SLIGHT
 Density    : 0.895   at 25   oC
 Boiling point   : 77 oC
 Melting point   : -84 oC
 Viscosity      : 0.473 cp at      15 oC
 Flashpoint     : -4 oC
 Explosive limits   : 2.2 – 11.5 Vol%
 Vapour pressure    : 97 mbar at 20 oC
 Skin absorption/irritation   : YES
 TLV       Country  NL               Year   1995    : 150 ppm               500      mg/m3
 Pollution category    1994     : D
 
MSDS

Heading1 - Varanasi Chemical

Product Name RXSOL-19-1168
Product Type   ETHYL ACETATE

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah UAE, Muscat Oman

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail @ rxmarine.com

Heading2 - Varanasi Chemical

Chemical Name

CAS Number

EC Number

Index number

Ethyl Acetate

141-78-6

205-500-4

607-022-00-5

Heading3 - Varanasi Chemical

Hazard description:
• Information concerning particular hazards for human and environment:
At long or repeated contact with skin it may cause dermatitis due to the degreasing effect of the solvent.
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or cracking.
R 67 Vapours may cause drowsiness and dizziness.

Heading4 - Varanasi Chemical

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water.If symptoms persist, consult a doctor.

After swallowing

If symptoms persist consult doctor.

Heading5 - Varanasi Chemical

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Protective equipment: No special measures required.

Heading6 - Varanasi Chemical

Person-related safety precautions: Not required.
Measures for environmental protection: 
Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Dilute with plenty of water.Ensure adequate ventilation.

Heading7 - Varanasi Chemical

   Handling:
Information for safe handling: No special requirement
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
  Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
  Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles

Heading8 - Varanasi Chemical

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
141-78-6 ethyl acetate
PEL (USA)
REL (USA)
TLV (USA)
WEL (Great Britain)

1400 mg/m³, 400 ppm
1400 mg/m³, 400 ppm
1440 mg/m³, 400 ppm
Short-term value: 400 ppm
Long-term value: 200 ppm

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work.Avoid contact with the eyes.Avoid contact with the eyes and skin.
Respiratory protection: INot required.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

Heading9 - Varanasi Chemical

General Information

Form

Fluid

Colour

Colourless

Odour

Fruit-like

Change in condition

Melting point/Melting range

-83.57°C

Boiling point/Boiling range

77-78°C

Flash point

-1°C

Ignition temperature 460°C

Danger of explosion

Product does not present an explosion hazard.

Explosion limits:
Lower 2.1 Vol %
Upper 22 Vol %
Vapour pressure at 20°C 20°C: 97 hPa
Density at 20°C 0.9 g/cm³
Solubility in / Miscibility with water at 20°C 79 g/l
Viscosity:
Dynamic at 22°C 0.44 mPas

Heading10 - Varanasi Chemical

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Heading11 - Varanasi Chemical

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

Inhalative

LD50

LC50/4 h

5620 mg/kg (rabbit)

1600 mg/l (rat)

Primary irritant effect:
on the skin No irritant effect.
on the eye No irritating effect.
Sensitization No sensitizing effects known.

Heading12 - Varanasi Chemical

General notes:
Water hazard class 1 (German Regulation) (Assessment by list):slightly hazardous for water
Do not allow product to reach ground water, water course or sewage system.

Heading13 - Varanasi Chemical

Product:
Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.

Heading14 - Varanasi Chemical

Land transport ADR/RID (cross-border)
  ADR/RID class 3 Flammable liquids.
  Danger code (Kemler) 33
  UN-Number 1173
  Packaging group II
  Hazard label 3
  Description of goods 1173 ETHYL ACETATE
Maritime transport IMDG
  IMDG Class 3
  UN Number 1173
  Label 3
  Packaging group II
  EMS Number F-E,S-D
  Marine pollutant No
  Proper shipping name ETHYL ACETATE
Air transport ICAO-TI and IATA-DGR
  ICAO/IATA Class 3
  UN/ID Number 1173
  Label 3
  Packaging group II
  Proper shipping name ETHYL ACETATE

Heading15 - Varanasi Chemical

• Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials.
• Code letter and hazard designation of product:
• Risk phrases:
11 Highly flammable.
36 Irritating to eyes.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapours may cause drowsiness and dizziness.
• Safety phrases:
2 Keep out of the reach of children.
16 Keep away from sources of ignition - No smoking.
26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
33 Take precautionary measures against static discharges.

Heading16 - Varanasi Chemical

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.