Peracetic acid 15%
Part No: RXSOL-15-1267-015
Zinc chloride solution is a colorless liquid. It is mildly corrosive to metals. It causes burns to eyes skin and mucous membranes.
Zinc Chloride Liquid Lye manufacturer and supplier. Zinc Chloride Liquid in Technical, Pure & LR Grade available in 25 Kg 50 Kg Liquid PACK.
Application
Zinc chloride solution is a colorless liquid. It is mildly corrosive to metals. It causes burns to eyes skin and mucous membranes.
Dosage
Technical Specification
Technical Details
Product Name : Zinc Chloride Liquid (Lye)
CAS No. 7646-85-7
Properties
|
Specifications |
Zinc Chloride Liquid (Lye) |
|
Assay (as ZnCI2) |
70% |
|
Appearance |
Water white liquid |
|
pH Value |
4.6-5.5 |
|
Iron & Lead |
Less than 10 ppm |
|
Specific Gravity |
1.40-1.45 |
|
Sulphates |
200 ppm max |
|
Ammonium |
400 ppm max |
|
Solubility |
Very soluble in water, freely soluble in ethanol (96 per cent) and in Glycerol. |
MSDS

| Porduct Name | Zinc Chloride Solution |
| Part Number | RXSOL-42-6141-051 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail @ rxmarine.com | |
| Website | www.rxmraine.com |

| Chemical Name | Cas No | EC No | Whight | Formula |
| Zinc chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur | 7646-85-7 | 231-592-0 | 136,30 g/mol | ZnCl2 |

| Signal Word | Danger |
| Hazard Statements | H314 Causes severe skin burns and eye damage. |
| Precautionary statements | P260 Do not breathe dust. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Supplemental Hazard Statements | None |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |

| General advice | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air. Call in physician. |
| Eye Contact | After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
| Swallowed | After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| Inhalation | Remove patient to fresh air, keep warm and at rest and get medical assistance in necessary. |
| Ingestion | Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately. |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |

| Flammability | May be combustible at high temperature. |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Hydrogen chloride gas Zinc/zinc oxides Not combustible. Fire may cause evolution of: Hydrogen chloride gas Ambient fire may liberate hazardous vapours. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system |
|
Hazardous combustion products |
Fire may cause the evolution of Sulphur oxides, nitrogen oxides. |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Protective Equipment | Use personal protective equipment. |
| Specific Hazards Arising from the Chemical |
Has a fire-promoting effect due to the release of oxygen. Ambient fire may liberate hazardous vapours. |

| Personal precautions, protective equipment and emergency procedures | Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas. For personal protection see section 8. |
| Spillage | Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal. |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |

| Advice on protection against fire and explosion | Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge. |
| Incompatible materials | Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. |
| Hygiene measures | Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. For precautions see section 2.2. |
| Advice on safe handling | Avoid contact with skin and eyes. Avoid inhalation of vapor or mist. |
| Conditions for safe storage, including any incompatibilities | Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. Moisture sensitive. |
| Storage conditions | Tightly closed. Dry. Recommended storage temperature see product label. |
| Storage class | Storage class (TRGS 510): 8B: Non-combustible, corrosive hazardous materials |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance. |

| Exposure controls | No specific additional engineering controls are required. Provide good natural or artificial ventilation. |
| Engineering Control | Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles |
| Body Protection | protective clothing |
| Skin protection | This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L |
| Respiratory protection |
Required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Other Protection Measure | Handle in accordance with good industrial hygiene and safety practice. |
| Control of environmental exposure | Do not let product enter drains. |

| Physical state | powder |
| Colour | white |
| Odour | odorless |
| Odor Threshold | Not Applicable |
| pH | No data available |
| Melting Point | 293 °C |
| Boiling Point | 97 °C - lit. |
| Flash Point | 6 °C - closed cup |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | No data available |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | No data available |
| Viscosity | > 100 - 200 mPa.s at 400 °C |
| Density | 2,93 g/cm3 at 22 °C |
| Relative Density | No data available |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | No data available |
| Solubility | 851 g/l at 20 °C - |
| Ignition temperature | No information available. |
| Particle characteristics | No data available |

| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions | Violent reactions possible with: sodium Strong oxidizing agents |
| Conditions to avoid | Heat, flames and sparks. |
| Incompatible materials |
various metals
|
| Hazardous decomposition products | In the event of fire: see section 5 |

| Acute toxicity | LD50 Oral - Rat - male - 1.100 mg/kg (OECD Test Guideline 401) Acute toxicity estimate Oral - 1.100 mg/kg (ATE value derived from LD50/LC50 value) LC50 Inhalation - Rat - female - 10 min - <= 1.975 mg/m3 - aerosol Remarks: (ECHA) LD50 Dermal - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 402) |
| Skin corrosion/irritation | Skin - Mouse Remarks: (ECHA) |
| Serious eye damage/irritation | Remarks: Risk of blindness! (Regulation (EC) No 1272/2008, Annex VI) |
| Respiratory or skin sensitization | Maximization Test - Guinea pig Result: negative (OECD Test Guideline 406) |
| Carcinogenicity | No data available |
| Germ cell mutagenicity | Test Type: In vitro mammalian cell gene mutation test Test system: mouse lymphoma cells Metabolic activation: without metabolic activation Result: negative Remarks: (ECHA) Test Type: Micronucleus test Species: Mouse Cell type: Red blood cells (erythrocytes) Application Route: Intraperitoneal Result: negative Remarks: (in analogy to similar products) (ECHA) The value is given in analogy to the following substances: Zinc sulphate |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure |
Inhalation - May cause respiratory irritation.
|
| Additional Information | RTECS: UF9625000 Lung irritation, Cyanosis, Central nervous system depression To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. |

| Persistence and degradability | No data available |
| Toxicity to fish | Flow-through test NOEC - Oncorhynchus mykiss (rainbow trout) - 0,039 mg/l - 30 d (OECD Test Guideline 215) |
| Toxicity to daphnia and other aquatic invertebrates | Static test EC50 - Daphnia magna (Water flea) - 0,33 mg/l - 48 h (OECD Test Guideline 202) |
| Toxicity | Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 1.520 mg/l - 96 h |
| Toxicity to bacteria | static test IC50 - activated sludge - 0,35 mg/l - 4 h (ISO 9509) Remarks: (referred to the cation) |
| Toxicity to algae | Static test NOEC - Pseudokirchneriella subcapitata (green algae) - 0,0049 mg/l - 72 h (OECD Test Guideline 201) |
| Products Biodegradation | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | No data available |
| Other adverse effects | Hazard for drinking water supplies. Discharge into the environment must be avoided. |

| Product | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |

| UN number | ADR/RID:2331 IMDG:2331 IATA: 2331 |
| UN proper shipping name | ADR/RID:ZINC CHLORIDE, ANHYDROUS IMDG:ZINC CHLORIDE, ANHYDROUS IATA:ZINC CHLORIDE, ANHYDROUS |
| Transport hazard class(es) | ADR/RID: 8 IMDG: 8 IATA:8 |
| Packaging group | ADR/RID: III IMDG: III IATA:III |
| Environmental hazards | ADR/RID: Yes IMDG: Yes IATA: No |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |

| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Other regulations | Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |

| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |