Phoenol Red Indicator 500 ml

Wet-side Spotting Agents

Wet-side pre-cleaning/spotting agents are used to clean water soluble stains from clothing. Wet-side agents can be subdivided into three different classes: neutral, alkaline, and acidic.

 

Neutral Wet-Side Agents – Neutral spotting agents include water and neutral synthetic detergents (which contain surfactants). These agents are used to remove water-soluble stains, food, beverages and water-soluble dyes.

 

Alkaline Wet-Side Agents – Alkaline spotting agents include lye, ammonia, potassium hydroxide, sodium hydroxide and so-called protein formula home detergents. Protein formula detergents contain digester enzymes - Amylase, Cellulase, Lipase and Protease. Digesters can be used to remove: starch, cellulose, fats and oils, and protein stains.

 

Acidic Wet-Side Agents – Acid agents include acetic acid, hydrofluoric acid, oxalic acid, glycolic acid and sulfuric acid. Tannin or plant-based stains can be removed with wet-side spotting agents also known as tannin formula agents. 

 

Product Name	Protein Stain Spotter
Product Type	RXSOL-41-8794-025

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	+91 22 65113333/ 5555 / 9999
Fax	+91 22 2781 1318 :::AOH 0091 9322594669
Email	mail @ rxmarine.com

 

Chemical Name	Concentration	CAS Number
Glycol ethers	5-10	1019768
Deionized Water	75 - < 90	7732-18-5
Dipropylene Glycol Monomethyl Ether	5 - < 15	34590-94-8
2-butoxyethanol	5 - < 15	111-76-2
2-aminoethanol	1 - < 05	141-43-5
Ammonium lauryl sulfate	< 1	2235-54-3
Ethoxylated Alcohols	< 1	68439-46-3

                                            Emergency Overview

Appearance: Clear Liquid           Odor: Mint Scent            Flashpoint: >212ºF

Eye Contact: May cause temporary eye irritation; injury to eye tissue unlikely

Skin Contact: Frequent or prolonged contact may cause temporary irritation. Skin contact may aggravate an existing dermatitis condition.

Inhalation: May cause temporary irritation.

Ingestion: Small amounts swallowed incidental to normal handling operations are not likely to cause injury; swallowing amounts larger than that may cause temporary injury.

HMIS Hazard Rating:    Health 1         Flammability 0        Reactivity 0

Eye Contact: Immediately irrigate with flowing water continuously for 15 minutes. If irritation persists consult medicalpersonnel.

Skin Contact: Wash with soap and water. If irritation persists consult medical personnel.

Inhalation: Move to fresh air. If irritation persists consult medical personnel.

Ingestion: If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. If injured party isconscious, give two glasses of water. Seek medical attention.

 Flashpoint: >212ºF                            Upper Flammable Limit (% by volume): N/A

Autoignition Temperature: N/D       Lower Flammable Limit (% by volume): N/A

General Hazard: Irritant.

Fire Fighting Procedures: Wear self-contained breathing apparatus and full protective clothing. Use water spray to cool nearby containers and structures exposed to fire.

Hazardous Decomposition Products: During a fire, smoke may contain the original material in addition to unidentified toxic and/or irritating compounds. Hazardous combustion products may include and are not limited to carbon dioxide and carbon monoxide.

Keep away from drains and ground water. Keep all unnecessary personnel away. Spill area may be slippery. Pick up excess with inert absorbent material and place into separate waste container. Ventilate area and wash spill site after material pickup is complete. Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.

Store out of reach of children; keep container closed; store in a cool well-ventilated area. Avoid contact with skin and eyes. Use in a well-ventilated area; do not breathe vapors. Wash hands thoroughly after handling.

Engineering Controls: Normal room ventilation is satisfactory for limited use.

Eye Protection: Safety glasses Skin Protection: Use gloves impervious to this material when prolonged or frequently repeated contact could occur.

Respiratory: No respiratory protection should be needed.

Exposure guidelines: N/E

Appearance:	Clear colorless
Physical State:	Liquid
Spec Grav./Density:	8.58 lb/gal
pH:	10.68 as is / 10.0 - 10.5 RTU
Odor:	Mint
Solubility:	Soluble

Stability: Product is stable under normal conditions.
Conditions to Avoid: None Known
Materials to Avoid: None Known
Hazardous Decomposition: Exposure to fire may liberate carbon dioxide, carbon monoxide, organic acids, and other unidentified thermal decomposition products from this product or its packaging.
Hazardous Polymerization: Will not occur.

Toxicity Data: Ethylene glycol butyl ether 111-76-2

Oral ( LD 50): 917 mg/kg - Rat

Inhalation ( LC 50): 2900 mg/m3/7H - Rat

Skin irritation: Mild

Eye irritation: Mild

Sensitation: Not considered an occupational sensitizer

Diethylene glycol butyl ether 112-34-5

Oral ( LD 50): 5660 mg/kg - Rat

Inhalation ( LC 50): Not listed on RTECS

Skin irritation: Moderate

Eye irritation: Severe

Sensitation: Not considered an occupational sensitizer

On the basis of available information, this material is not expected to produce any significant environmental effects when recommended use instructions are followed.

Dispose of in accordance with local regulations.

Ship in accordance with 49 CFR parts 100-185. Non-hazardous for air, sea and road freight. 

 COMPONENT / (CAS/PERCENT)/ CODES

*Ethylene glycol monobutyl ether (111762 <5%) MASS, OSHAWAC, PA, TSCA, TXAIR, WHMIS

*Diethylene glycol monobutyl ether (112345 <5%) TSCA, WHMIS

*Diethylene glycol monobutyl ether (112345 <5%) TSCA, WHMIS

All information appearing herein is based upon data obtained from the raw material manufacturer and/or recognized technical sources. While the information above is believed to be true and accurate, the author makes no representations as to its accuracy or sufficiency. Conditions of use are beyond the manufacturer's control; therefore the users are responsible to verify this data under their own particular conditions, applications and regulations to determine if the product is suitable for their particular purposes. The users assume all risks of product use, handling, disposal, reliance upon, publication or use of the information contained herein. This information applies only to the product designated above and does not necessarily apply to its use in combination with other materials, products, chemical compounds, structures or processes.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.