Skip to main content
Drag

Pipette 3ml plastic


Pump & Accessory-21

Pipette 3ml plastic

Part No: RXSOL-21-2124-010

ETHYLL ACTATE

Application
PRODUCT NAME       : ETHYLLACTATE
CAS number         : 97-64-3
UN number       : 1192
Formula  : CH3CHOHCOOC2H5
Odour       : MILD
Solubility in water   : MISCIBLE
Density  : 1.028  AT 20 oC
Boiling point         : 154 oC
Melting point     : oC
Viscosity        :  
Flashpoint     : 46 oC
Explosive limits      : 1.5 - ? Vol%
Vapour pressure     :  
Skin absorption/irritation    : YES
TLV       Country         :  
Dosage

Technical Specification

MSDS

Heading1 - Varanasi Chemical

Product Name RXSOL-19-1186
Product Type   ETHYLL ACTATE

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail @ rxmarine.com

Heading2 - Varanasi Chemical

Chemical Name

CAS Number

EC Number

Index number

ethyl acetate

141-78-6

205-500-4

607-022-00-5

Heading3 - Varanasi Chemical

Hazard description:
Information concerning particular hazards for human and environment:
At long or repeated contact with skin it may cause dermatitis due to the degreasing effect of the solvent.
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or cracking.
R 67 Vapours may cause drowsiness and dizziness.
 

Heading4 - Varanasi Chemical

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water.If symptoms persist, consult a doctor.

After swallowing

If symptoms persist consult doctor.

Heading5 - Varanasi Chemical

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Protective equipment: No special measures required.

Heading6 - Varanasi Chemical

Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection: Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Dilute with plenty of water. Ensure adequate ventilation.

Heading7 - Varanasi Chemical

Handling:
Information for safe handling: No special requirement
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles

Heading8 - Varanasi Chemical

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
141-78-6 ethyl acetate

PEL (USA)

REL (USA)

TLV (USA)
WEL (Great Britain)

1400 mg/m³, 400 ppm
1400 mg/m³, 400 ppm
1440 mg/m³, 400 ppm
Short-term value: 400 ppm
Long-term value: 200 ppm

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes.Avoid contact with the eyes and skin.
Respiratory protection: Not required.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

Heading9 - Varanasi Chemical

General Information

Form

Fluid

Colour

Colourless

Odour

Fruit-like

Change in condition

Melting point/Melting range

-83.57°C

Boiling point/Boiling range

77-78°C

Flash point

-1°C

Ignition temperature 460°C

Danger of explosion

Product is not explosive. However, formation of explosive air/vapour mixtures are possible.

Explosion limits:
Lower 2.1 Vol %
Upper 11.5 Vol %
Vapour pressure at 20°C 97 hPa
Density at 20°C 0.9 g/cm³
Solubility in / Miscibility with water at 20°C 79 g/l
Viscosity:
Dynamic at 22°C 0.44 mPas

Heading10 - Varanasi Chemical

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Heading11 - Varanasi Chemical

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

Inhalative

LD50

LC50/4 h

5620 mg/kg (rabbit)

1600 mg/l (rat)

Primary irritant effect:
on the skin No irritant effect.
on the eye Irritating effect.
Sensitization No sensitizing effects known.

Heading12 - Varanasi Chemical

General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Heading13 - Varanasi Chemical

Product:
• Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
• Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.

Heading14 - Varanasi Chemical

Land transport ADR/RID (cross-border)
  ADR/RID class 3 Flammable liquids.
  Danger code (Kemler) 33
  UN-Number 1173
  Packaging group II
  Hazard label 3
  Description of goods 1173 ETHYL ACETATE
Maritime transport IMDG
  IMDG Class 3
  UN Number 1173
  Label 3
  Packaging group II
  EMS Number F-E,S-D
  Marine pollutant No
  Proper shipping name ETHYL ACETATE
Air transport ICAO-TI and IATA-DGR
  ICAO/IATA Class 3
  UN/ID Number 1173
  Label 3
  Packaging group II
  Proper shipping name ETHYL ACETATE

Heading15 - Varanasi Chemical

• Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
• Risk phrases:
11 Highly flammable.
36 Irritating to eyes.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapours may cause drowsiness and dizziness.
• Safety phrases:
2 Keep out of the reach of children.
16 Keep away from sources of ignition - No smoking.
26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
33 Take precautionary measures against static discharges

Heading16 - Varanasi Chemical

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.