PIPETTE Glass 1ML
Part No: RXSOL-21-2121-001
Methyl methacrylate (MMA) is a monomer also known as methacrylic acid, methyl ester.
Methyl methacrylate (MMA) is a monomer that's also known as methacrylic acid, methyl ester.
Application
METHYL METHACRYLATE most commonly used in Paint Industries as addition of MMA during manufacturing of acrylic-based polymers increase durability as well as flexibility in Paints, MMA has applications that include safety glazing, exterior paints, vinyl impact modifiers, adhesives, illuminated light displays.
Dosage
MMA uses :
Manufacturing of plates, rods, and pipe, Molding material
Paint
Dental material
Adhesive
Fiber processing agent
Leather treatment
Technical Specification
| PRODUCT NAME | : | METHYLMETHACRYLATE |
| CAS number | : | 80-62-6 |
| UN number | : | 1247 |
| Formula | : | CH2:C(CH3)COOCH3 |
| Odour | : | |
| Solubility in water | : | NEGLIGIBLE |
| Density | : | 0.944 at 20 OC |
| Boiling point | : | 101 OC |
| Melting point | : | -48 OC |
| Viscosity | : | |
| Flashpoint | : | 10 OC |
| Explosive limits | : | 2.1 – 12.5 Vol% |
| Vapour pressure | : | 47 mbar at 20 OC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 100 ppm 410 mg/m3 |
| Pollution category 1994 | : | D |
MSDS
| Product Name | RXSOL-19-1372 |
| Product Type | Methyl Methacrylate |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kolkata, Kandla, Chennai, Visakhapatnam, Fujairah, Muscat Barka
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail @ rxmarine.com |
|
Chemical Name |
CAS Number |
EC Number |
Index number |
|
Methyl Methacrylate |
80-62-6 |
201-297-1 |
607-035-00-6 |
Hazard description:
Information concerning particular hazards for human and environment:
R 11 Highly flammable.
R 37/38 Irritating to respiratory system and skin.
R 43 May cause sensitisation by skin contact.
|
After inhalation |
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation. |
|
After skin contact |
Immediately wash with water and soap and rinse thoroughly. |
|
After eye contact |
Rinse opened eye for several minutes under running water. |
|
After swallowing |
If symptoms persist consult doctor. |
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Protective equipment: No special measures required.
Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection: Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Dilute with plenty of water. Ensure adequate ventilation.
Handling:
Information for safe handling: No special requirement
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles.
Additional information about design of technical facilities: No further data; see item 7.
| Ingredients with limit values that require monitoring at the workplace: | |
| 80-62-6 methyl methacrylate | |
|
PEL (USA) REL (USA)
TLV (USA) |
410 mg/m³, 100 ppm 410 mg/m³, 100 ppm Short-term value: 410 mg/m³, 100 ppm Long-term value: 205 mg/m³, 50 ppm SEN Short-term value: 416 mg/m³, 100 ppm Long-term value: 208 mg/m³, 50 ppm |
Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes.Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Tightly sealed goggles
|
General Information |
|
|
Form |
Fluid |
|
Colour |
Colourless |
|
Odour |
Acrid |
|
Change in condition |
|
|
Melting point/Melting range |
-48°C |
|
Boiling point/Boiling range |
101°C |
|
Flash point |
10°C |
| Ignition temperature | 430°C |
|
Danger of explosion |
Product is not explosive. However, formation of explosive air/vapour mixtures are possible. |
| Explosion limits: | |
| Lower | 2.1 Vol % |
| Upper | 12.5 Vol % |
| Vapour pressure at 20°C | 47 hPa |
| Density at 20°C | 0.94 g/cm³ |
| Solubility in / Miscibility with water at 20°C | 1.6 g/l |
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.
| Acute toxicity: | |||||
| LD/LC50 values relevant for classification: | |||||
|
Oral |
LD50 |
7872 mg/kg (rat) |
|||
| Primary irritant effect: | |||||
| on the skin | Irritant to skin and mucous membranes. | ||||
| on the eye | No irritating effect. | ||||
| Sensitization | Sensitization possible through skin contact. | ||||
General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Product:
• Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
• Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
| Land transport ADR/RID (cross-border) | ||
| ADR/RID class | 3 Flammable liquids. | |
| Danger code (Kemler) | 339 | |
| UN-Number | 1247 | |
| Packaging group | II | |
| Hazard label | 3 | |
| Description of goods | 1247 METHYL METHACRYLATE MONOMER, STABILIZED | |
| Maritime transport IMDG | ||
| IMDG Class | 3 | |
| UN Number | 1247 | |
| Label | 3 | |
| Packaging group | II | |
| EMS Number | F-A,S-D | |
| Marine pollutant | No | |
| Proper shipping name | METHYL METHACRYLATE MONOMER, STABILIZED | |
| Air transport ICAO-TI and IATA-DGR | ||
| ICAO/IATA Class | 3 | |
| UN/ID Number | 1247 | |
| Label | 3 | |
| Packaging group | II | |
| Proper shipping name | METHYL METHACRYLATE MONOMER, STABILIZED | |
• Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
• Risk phrases:
11 Highly flammable.
37/38 Irritating to respiratory system and skin.
43 May cause sensitisation by skin contact.
• Safety phrases:
2 Keep out of the reach of children.
24 Avoid contact with skin.
37 Wear suitable gloves.
46 If swallowed, seek medical advice immediately and show this container or label.
This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.