Skip to main content
Drag

PRELOAD Slip HOLD BLOCK

Ship Hold Cleaner

PRELOAD Slip HOLD BLOCK

Part No RXSOL-20-2210-210

Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Overview

Polymer based Hold coating product, Easy to apply on SHIP HOLD SURFACE.  Slip Barrier Coats HOLD BLOCK is POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Application

PRELOAD Slip HOLD BLOCK Application Procedure

Before application, previous cargo residues should be completely removed, and the existing paint/coating on the surface should be properly cured. 

Application guidance recommends using suitable low-pressure spraying equipment. Application should begin at the bottom of the bulkheads and proceed upward, followed by the tank sides and tank tops. The nozzle is positioned approximately half a metre from the surface during application.
The stated coverage is approximately 16–18 m² per litre, depending on application conditions and surface characteristics. After application, the coating should be allowed to dry completely before loading cargo. Typical drying time is approximately 1–2 hours, depending on temperature and humidity. 


RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels , which carrying corrosive and / or messy cargos  such as sulphur salt petcock coal and concentrates. It can be easily removed with it

General Recommendation Dose for smooth surface : 
for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface  each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Dosage

for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX    (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Technical specification

Technical Properties

PRELOAD Slip HOLD BLOCK as a clear, pale liquid. Published technical information lists a specific gravity around 1.00–1.02 g/cm³ and a pH in the approximately 6.5–7.5 range, with some editions specifying slightly different test conditions. Always refer to the latest product technical data sheet for the specification applicable to the supplied batch.

  •  
  • Product metal against corrosive cargo
  • Products paint against cargo penetration
  • Environmentally friendly
  • Safe to  use in occupied / covered areas
  • Reduces turn around times
  • Easy to direct spray
  • If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
  • Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective  equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
  • And don’t forget procedures  have to be drown up and your
  • Crew  trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time

Safety data sheet (MSDS)

The MSDS for PRELOAD Slip HOLD BLOCK is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.

Request MSDS