RXSOL D 7

Carpet stain removing specialized product most commonly used in house carpet, office carpet, car carpet, RV, Ship Boat carpet etc. Also  effectively claens graphite, tea, wine, shoe polish, copy toner, ball point pen and ink and many more.

It excels at spot and stain removal while maintaining a "green" profile. It exceeds the effectiveness of current "protein spotters", removing with ease the typical blood, grass, and chocolate stains, and then with unique ingredients not in other spotters it tackles tough combination stains that may contain fats, proteins, dyes, cellulose, lipids and other unique organics.

Perky Plus, the next generation of Perky

Perky has long been used as a consumer and professional spotter. Perky Plus, has the same ingredients as Perky plus five additional ingredients. As in Perky, all of the ingredients are "green". The product will work on all of the spots that Perky works on (usually with a performance enhancement) plus some additional spotting issues. The product uses three different solvents two of which have come to market this century. Perky Plus also has two additional surfactants to help increase the breadth of performance.

Perky Plus serves as a bridge from Perky to more aggressive POG (paint, oil, and grease remover) products. It is obvious, in most cases, when a spot or stain will require you to go directly to a smelly POG. However, minor paint, ink and grease spots can be removed with the use of Perky Plus. In our opinion, a professional will be best served if they use Perky Plus instead of Perky as more spots they treat will be removed.

Carpet Stain remover is controlled balance pH of 9.5 and specialised to removes oil based spots and stains including most cosmetics, grease, oil, inks, shoe polish, etc.

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kolkata, Kandla, Chennai, Visakhapatnam, Fujairah

PRINCIPLE HAZARDOUS INGREDIENTS:          OSHA PEL

Glycol Ether DPM (CAS# 34590-94-8 )                 600 mg/m3 100 ppm SKIN

EMERGENCY OVERVIEW

Physical Properties: clear solution with mild odor

IMMEDIATE HEALTH EFFECTS

Eyes: Overexposure may cause irritation to eyes.

Skin: Prolonged and repeated contact may cause irritation to skin.

Inhalation: Inhalation may cause irritation of upper respiratory passages.

Ingestion: Single dose oral toxicity is low. Swallowing large amounts may be harmful.

PRIMARY ROUTES OF ENTRY: Eyes, skin contact/absorption, inhalation or ingestion.

SIGNS/SYMPTOMS OF OVEREXPOSURE: Gastrointestinal irritation (nausea, vomiting, diarrhea), and/or irritation to the skin, eyes, nose, throat, and respiratory tract.

TARGET ORGAN EFFECTS: Irritation of the skin and eyes. Irritation of lungs possible if mists/aerosols are inhaled.

REPRODUCTIVE/DEVELOPMENTAL INFORMATION: No data available.

CARCINOGENIC INFORMATION: None of the ingredients of this material are listed as carcinogens by IARC, NTP, or OSHA.

LONG TERMEFFECTS: No data available.

EYES: Flush eyes with water for at least 15 minutes. If irritation persists, consult a physician.

SKIN: If irritation occurs, flush skin with water for at least 15 minutes. If irritation persists, consult a physician

INHALATION: If symptoms of overexposure develop, remove to fresh air. If symptoms persist, consult a physician.

INGESTION: Give 8 to 16 ounces of water to dilute substance. Do not induce vomiting. Consult a physician or local Poison Control Center. Never give anything by mouth to an unconscious person.

FLASHPOINT (° Fahrenheit): No flash below boil.

EXPLOSIVE LIMITS: No data available.

AUTOIGNITION TEMPERATURE: No data available.

HAZARDOUS PRODUCTS OF COMBUSTION: In the event of fire, the following may be released: Carbon dioxide and/or carbon monoxide, oxides of nitrogen and sulfur.

EXTINGUISHING MEDIA: Water spray, foam, dry chemical powder of carbon dioxide.

FIRE FIGHTING INSTRUCTIONS: Firefighters should wear proper protective equipment and selfcontained breathing apparatus with full facepiece operated in positive pressure mode. Move containers from fire area if it can be done without risk. Use water to keep fire-exposed containers cool.

NFPA/HMIS RATINGS: Health: 1, Flammability: 0, Reactivity: 0

Keep all unnecessary personnel away. Prevent additional discharge of material. Prevent liquid from entering sewers, watercourses, or low areas. Contain and absorb spilled liquid with sand or earth or vaccum up with extraction machine. All disposal must be in accordance with all federal, state and  local  regulations.

HANDLING: Handle and open containers with care.

STORAGE: Store in a cool, well ventilated place away from incompatible materials.

Respiratory Protection: None normally needed.

Protective Clothing : None normally needed.

Eye Protection : None normally needed.

Ventilation:  Normal room ventilation should suffice

Storage: Store above 5 5oF. Store out of reach of Children. Keep container tightly closed

CHEMICAL STABILITY: Stable.

CONDITIONS TO AVOID: None with proper storing and handling.

MATERIALS TO AVOID: Strong oxidizing materials.

HAZARDOUS DECOMPOSITION: Upon combustion, the following may be produced: Carbon dioxide and/or carbon monoxide, oxides of nitrogen and sulfur.

HAZARDOUS POLYMERIZATION: Will not occur.

 ROUTES OF EXPOSURE: Skin absorption, eye contact, inhalation, and ingestion.

CARCINOGENITY: None of the components of this material are listed as carcinogens by IARC, NTP, or OSHA.

TERATOGINICITY, MUTAGENICITY, OR OTHER REPRODUCTIVE EFFECTS: No data available.

CONDITIONS AGGREVATED BY EXPOSURE: No data available.

SYNERGISTICMATERIALS: No data available.

Glycol Ether DPM

Acute Toxicity

Ingestion LD50, Rat 5,135 mg/kg Skin Absorption LD50, Rabbit > 20 ml/kg

Inhalation LC50, 7 h, Aerosol, Rat > 500 ppm

Skin Sensitivity - Did not cause allergic skin reactions when tested in humans.

Glycol Ether DPM

Material is readily biodegradable.

Material is practically non-toxic to aquatic organisms on an acute basis

(LC50/EC50 >100 mg/L in the most sensitive species tested

Do not dispose of on the land, in surface waters, or in storm drains. Small spills and waste may be flushed into a waste treatment sewer where local regulations permit. Larger quantities should be collected for reuse or consigned to a licensed hazardous waste hauler for disposal in accordance with federal, state and local regulations. All disposal must be in accordance with all federal, state and local regulations.

DOT INFORMATION – 49CFR172.101

Proper shipping name: Compounds, cleaning, liquid – NOS DOT

Hazardous Class: Non hazardous

Hazardous Components: None

All components are listed on TSCA

 This product has no established regulatory information. All regulatory information given is based on individualcomponents of the mixture by component number. While this information and recommendations set forth herein are believed to be accurate and reliable, it is provided without warranty regarding its accuracy. RX MARINE INTERNATIONAL MAKES NO WARRANTY WITH RESPECT HERETO AND DISCLAIMS ALL LIABILITY FROM RELIANCE THEREON. Users must determine safe conditions for use and assume liability for any loss, injury, damage or expense resulting from use of this product.

N/A= Not applicable N/D= Not determined N/E= Not established

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.