Skip to main content
Drag

Sodium Acetate Trihydrate

Medicine

Sodium Acetate Trihydrate

Part No RXSOL-95-6146-500

ADVANCE MEMBRANE SYSTEM CLEANER FOR R.O PLANT Membrane Cleaner Removal of Iron Containing deposits

Overview

Membrane Cleaner ORG 77 is a specialized acidic membrane cleaner formulated for the effective removal of iron fouling, oxides, hydroxides, and light calcium carbonate deposits from reverse osmosis (RO), nanofiltration (NF), and ultrafiltration (UF) membranes. The product is based on a carefully balanced blend of organic acids, chelating agents, and proprietary buffer salts which maintain a stable pH of approximately 3.6 during use. This unique buffering action ensures consistent cleaning performance, preventing rapid pH drift and maintaining optimum efficiency throughout the cleaning cycle.

Iron fouling is one of the most common causes of reduced membrane performance, leading to decreased permeate flow, reduced salt rejection, and increased differential pressure. Membrane Cleaner ORG 77 penetrates and dissolves iron deposits effectively while dispersing loosened particles and preventing re-precipitation. In addition, its mild acid chemistry provides secondary action against light carbonate scale, making it a versatile cleaner for both iron-affected and lightly scaled systems.

The product is safe for polyamide thin-film composite membranes when used as directed, and is fully compatible with standard membrane cleaning protocols recommended by leading membrane manufacturers.

Application

Application of Membrane Cleaner ORG 77 Iron Cleaning Membrane Cleaner

  • Desalination plants (SWRO and BWRO).
  • Power plants, boiler make-up, and cooling tower RO pretreatment units.
  • Food, beverage, and pharmaceutical water systems.
  • Municipal and industrial water treatment plants.
  • Any membrane system affected by iron fouling or light carbonate scaling.
Dosage
How to use Membrane Cleaner for most efficient RO membrane cleaning procedure
  • Prepare a 4% w/w solution in chlorine-free permeate water (1 kg ORG-77 per 25 kg water).
  • Circulate at ≤35 °C for 2–3 hours, depending on fouling severity.
  • Replace solution if it turns red/brown (indicating iron saturation).
  • After cleaning, flush system thoroughly with permeate until pH matches inlet water.
  • Neutralize spent solution with alkali before disposal.

NOTE: Dosage may vary depending on fouling concentration. Contact your RXSOL representative

Technical specification
Property Value
Appearance Clear to light yellow liquid
Odor Mild acidic
pH (1% solution) ~3.6 (buffered)
Specific Gravity 1.20 – 1.25
Solubility Fully miscible in water

Safety data sheet (MSDS)

The MSDS for Sodium Acetate Trihydrate is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.

Request MSDS