Application

PRODUCT NAME	:	DI ISOBUTYL AMINE
CAS number	:	108-83-8
UN number	:	1157
Formula	:	[(CH3)2CHCH2]2NH
Odour	:	MILD
Solubility in water	:	NEGLIGIBLE
Density	:	0.809 at 20 ^OC
Boiling point	:	168 ^OC
Melting point	:	^OC
Viscosity	:
Flashpoint	:	48 ^OC
Explosive limits	:	0.8 – 6.2 Vol%
Vapour pressure	:	5 mbar at 20 ^OC
Skin absorption/irritation	:	YES
TLV Country NL Year 1995	:	25 ppm 150 mg/m3
Pollution category 1994	:	D

Dosage

Technical Specification

MSDS

Heading1 - Varanasi Chemical

Product Code	RXSOL-19-1132-025
Product Name	Iso Butyl Amine

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	+91 22 65113333 / 5555 / 9999
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com

Heading2 - Varanasi Chemical

INGREDIENTS	CAS no	EC-No.
Isobutylamine	78-81-9	201-145-4

Heading3 - Varanasi Chemical

skin contact	Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
eye contact	Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician
inhaled	If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician
swallowed	Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Heading4 - Varanasi Chemical

swallowed

Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physicial

inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician

skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take

victim immediately to hospital. Consult a physician.

eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician

Heading5 - Varanasi Chemical

Suitable extinguishing media	For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water.
Advice for fire fighters	Wear self contained breathing apparatus for fire fighting if necessary.
Further information	Use water spray to cool unopened containers

Heading6 - Varanasi Chemical

Personal precautions	Wear respiratory protection. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas
Environmental precautions	Prevent further leakage or spillage if safe to do so. Do not let product enter drains
Methods and materials for containment and cleaning up	Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations

Heading7 - Varanasi Chemical

Precautions for safe handling	Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge.
Conditions for safe storage, including any incompatibilities	Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage

Heading8 - Varanasi Chemical

engineering controls	Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product
Eye/face protection	Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government
Skin protection	Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Heading9 - Varanasi Chemical

Appearance	clear liquid
Odour	NA
pH	NA
Melting point/freezing point	-85 °C - lit.
Flash point	-9 °C - closed cup
Vapour pressure	NA
Relative density	0,736 g/cm3 at 25 °C
Water solubility	NA

Heading10 - Varanasi Chemical

Reactivity :- N/A

Chemical stability :- N/A

Incompatible materials :- Strong oxidizing agents

Heading11 - Varanasi Chemical

Skin	May be harmful if absorbed through skin. May cause skin irritation.
Eyes	may cause eye irritation
Inhalation	If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician

Heading12 - Varanasi Chemical

Toxicity	NA
Bioaccumulative potential	N/A
Persistence and degradability	NA
Mobility in soil	NA

Heading13 - Varanasi Chemical

Waste treatment methods

Product

Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable.

Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose

of this material

Contaminated packaging

Dispose of as unused product.

Heading14 - Varanasi Chemical

N/A

Heading15 - Varanasi Chemical

REGULATORY INFORMATION

This safety datasheet complies with the requirements of Regulation

Safety, health and environmental regulations/legislation specific for the substance or mixture

N/A

Heading16 - Varanasi Chemical

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this

document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.