Tri Methyl Amine
Part No: RXSOL-19-1474-210
Alkaline Tank Cleaner, with an exceptional solvency power on soil & oily matter for oil residues
RXSOL KT-SOL PLUS Heavy Duty
RXSOL KT-SOL PLUS Heavy Duty is a powerful industrial and marine cleaning chemical developed for demanding cleaning applications where ordinary cleaners may not provide sufficient cleaning performance. Its heavy-duty cleaning action helps remove oil, grease, stubborn dirt, carbonaceous residues and other difficult industrial contaminants from suitable washable surfaces.
The product is designed for professional maintenance and cleaning operations in marine, industrial, engineering, workshop and equipment-maintenance environments.
Suitable product for Cargo hold cleaning after coal and pet coke. RXSOL-20-3201-025 is a superior Heavy duty and highly concentrated Alkaline Cleaner, containing specially selected surfactant and powerful long chain organic syndet , specific salts with surfactants & wetting agents . It is low toxic product with an exceptional solvency power on soil & oily matter for oil residues, hydrocarbon residues, inert gas residues and residues of soot and combustion. Removal of black/brownish residues after cargoes like crude benzene, creosote dirty naphtha, pygas, gas condensate etc.. It is free from Hydrocarbon solvents and Phosphates Biodegradable and minimizes the extreme hazards to personnel in handling materials. It is suitable for cargo hold cleaning after coal and pet coke.
Cause no danger to human health and to the environment
No dangerous good in regulation of transport (land, sea and air)
Application
Leaves surfaces feeling clean and refreshed.
- Effective on tough dirt
- Ideal for heavy-duty cleaning
- Easy to use and apply
- Suitable for multiple surfaces
- Reliable for daily cleaning needs
Key Applications
-
Heavy-duty marine cleaning
-
Engine-room and machinery-area cleaning
-
Removal of oil and grease
-
Workshop and maintenance-area cleaning
-
Machinery and equipment cleaning
-
Industrial floor and surface cleaning
-
Shipyard and engineering applications
-
Removal of stubborn industrial dirt and residues
-
General heavy-duty maintenance cleaning
Key Benefits
-
Powerful cleaning action for demanding applications
-
Helps remove stubborn oil and grease deposits
-
Suitable for industrial and marine maintenance
-
Effective against accumulated dirt and heavy contamination
-
Helps reduce manual cleaning effort
-
Suitable for a wide range of compatible washable surfaces
-
Designed for professional cleaning and maintenance operations
Dosage
Concentrate can be diluted 5 to 10% and during application diluted solution can be kept for 5-10 minutes on surface. Then finally use high pressure jet water. Always remember never keep cleaing solution dry on hold surface.
Typical Areas of Use
Ships & Vessels → Engine Rooms → Workshops → Machinery → Equipment → Shipyards → Industrial Facilities → Maintenance Areas
Application
Apply RXSOL KT-SOL PLUS Heavy Duty according to the level and type of contamination. Allow adequate contact time for the cleaner to penetrate and loosen deposits, then agitate where necessary and rinse thoroughly with suitable water.
For sensitive metals, painted surfaces, coatings, rubber, plastics or other special materials, conduct a compatibility test before full-scale application.
Technical Specification
Product Properties:
|
Appearance |
Pale / Brownish liquid |
|
Density |
In g/cm3 at 20°C: Spec. gravity : 1.035 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH |
Alkaline ( 12.7 - 13 ) |
|
Flash point |
Not Applicable |
|
Solubility |
100% soluble in water |
|
Packaging |
Size (in Litres) |
MSDS
| Product Name | RXSOL-20-3201-210 |
| Product Type | KT - SOL PLUS Heavy Duty 210 Ltr |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kandla, Mundra, Chennai, Ennore, Kolkata, Haldia, Visakhapatnam, Gangavram, Fujairah
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| care @ rxmarine.com | |
| Website | www.rxmarine.com |
SURFACTANT ( ANIONIC & NON-IONIC ) , LAB , Potassium hydroxide Strong alkaline cleaner Declaration according recommendation 89/542/EEG.. chelating agents, meta silicate and additives (biodegradable > 90%)
*See Section 16
Corrosive
|
Environmental Hazards |
None |
|
Human Health Hazards |
Moderates |
| R 35:Causes skin burning effects | |
|
Inhalatin |
Harmful,. supply or remove to fresh air and seek medical advice attention. |
|
Skin Contact |
Rinse with running water and soap. Skin care. Remove contaminated clothes. |
|
Eye Contact |
Flush with running water for at least 15 minutes Immediately . |
|
Ingestion |
Vomiting is dangerous , seek medical attention. |
Non Combustible Porduct
|
Suitable |
N.A. can use foam dry Co2 , water-spray. |
|
Not suitable |
Not applicable |
|
Special |
Not applicable |
|
Protection of fire Fighter |
Not applicable |
Special protective equipment for fire-fighters: Wear protective equipment.
|
Enviromentel Precaution |
Direct flow into drainage system, surface or ground water is prohibited. |
|
Cleaning Method |
Flush Spill Area with Water and remove with liquid-absorbing material like foam sand,sawdust etc.. |
|
Condition to Avoid |
Non flammable but avoid direct heating |
|
Materials to Avoid |
Do not subject to Acidic / Oxidizing Agents |
|
Handling |
Keep Container Tightly Closed |
Note:Eyewash facilities require at workplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
•Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSOL.)
Personal protection :
|
Respiratory System Protection |
Approved respirator must be worn when spraying |
|
Eye Protection |
Cear eye protection (on possibility of contact ) |
|
Hand protection |
Cear PVC chemical resistance protective glove |
Gloves Suit Goggles No_Smoking
Product Properties:
|
Appearance |
Pale clear liquid |
|
Density |
In g/cm3 at 20°C: Spec. gravity : 1.035 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH |
Alkaline ( 12.7 - 13 ) |
|
Flash point |
Not Applicable |
|
Solubility |
100% soluble in water |
|
Packaging |
Size (in Litres) |
|
Hazardous Decomposition Products |
Do not occur if stored and used as directed. n FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced |
NOTE : Avoid Contact With Acid
Comment - Not applicable , Emulsifies in water
95 % added surfactants are biodegradable as per by international regulation .This material must be disposed with local national regulations.
As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.
|
Proper Shipping Name |
||||
|
UN |
||||
|
Proper Shipping Name |
Sodium hydroxide, solution |
|||
|
UNNo. |
1824 |
|||
|
Hazard Class |
8 |
PackingGroup |
II |
|
|
Road/Rail(ADR/RID) |
||||
|
Proper Shipping Name |
Sodium hydroxide, solution |
|||
|
ADR UN No. |
1824 |
|||
|
ADR Hazard Class |
8 |
Tremcard |
80S1824 |
|
|
Sea(IMDG) |
||||
|
Proper Shipping Name |
Sodium hydroxide, solution |
|||
|
IMDG UN No. |
1824 |
|||
|
IMDG Hazard Class. |
8 |
IMDG Pack Group. |
II |
|
|
IMDG EmS |
F-A, S-A |
IMDG subrisk |
N/A |
|
|
IMDG Labels |
8 |
IMDG Flash point |
N/A |
|
|
Air(ICAO/IATA) |
||||
|
Proper Shipping Name |
Sodium hydroxide, solution |
|||
|
ICAO Un No. |
1824 |
|||
|
ICAO Hazard Class |
8 |
ICAO Packing Group. |
II |
|
|
ICAO subrisk |
N/A |
ICAO Labels |
8, CAO |
|
|
ICAO Flashpoint |
N/A |
|||
|
DOT/ CFR (US Department of Transportation) |
||||
|
DOT Proper Shipping Name |
Sodium hydroxide, solution |
|||
|
Hazardous Material |
Sodium hydroxide |
|||
|
Hazard Class |
8 |
Identification Number |
UN 1824 |
|
|
Product RQ (lbs) |
3640 |
DOT subrisk |
N/A |
|
|
DOT Labels |
8 |
DOTFlashpoint |
N/A |
|
Classification and labelling according to Chemicals Hazard Information and Packaging Regulations (CHIP). Symbols of danger :- C Corrosive
|
R phrases |
R 35 : Causes severe burns |
|
S-phrases |
S2: Keep out of reach of children S26 :In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 : After contact with skin, wash immediately with plenty of water. S37/39 : Wear suitable gloves and eye/face protection. |
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our product from the point of view of safety requirements and is not intended to guarantee any particular properties
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.