Skip to main content
Drag

Turbine Kleen 81 RXSOL

Engine room Maintenance

Turbine Kleen 81 RXSOL

Part No RXSOL-81-8185-025

Gas Turbine Compressor Cleaner gives ultra effectiveness from a natural-solvent chemical. It is safe & user friendly product for both online & offline compressor cleaning.

Overview

Turbine Kleen 81 RXSOL  is liquid concentrate Gas Turbine Compressor Cleaner, which is  made from surfactant and biodegradable natural enzyme based solvent chemicals. Its consists of corrosion inhibitors and developed to give the maximum possible cleaning efficiency With ultra effectiveness from a natural-solvent chemical. Due to advanced formula based on latest bio - technology make it a very safe & user friendly product for both online & offline compressor cleaning. Usually compressor cleaners are formulated either from anionic, cationic or nonionic surfactants.  Turbine Kleen 81 Rx  however contains a very complex triple-active formula of cationic, nonionic and amphoteric surfactants, of which the latter is a state-of-the-art surfactant custom made for Turbine Kleen 81 Rx.

Application

It can be used with any on-line/off-line injection system. It is designed to remove the accumulation of atmospheric impurities, oil and oil oxidation products that occurs in the compressor of such engines and so restore the power loss caused by these deposits.

Dosage

Recommendation dose is 1 part Turbine Kleen 81 Rx  with water in the proportion of 1 part 4 parts water. The product has a low trace analysis of inorganic impurities and, in order that the working solution applied to the compressor is equally low in such impurities. Use demineralised water as specified by the engine manufacturer, typically <11μS/cm. The volume of chemical solution needed per wash and the optimum cleaning frequency will depend upon engine size, operating environment and fouling tendency. It is recommended that a post rinse is performed to ensure that the nozzle system is cleaned and ready for next operation.

Turbine Kleen 81 Rx  solution is sprayed into the cranked or fired engine, according to the engine manufacturers' approved method, using the equipment and technique appropriate to the engine being cleaned. Allowed to soak for 20 to 30 minutes then thoroughly rinsed off at cranking speed with good quality water acceptable to the engine manufacturer The volume of solution required and the flow rate will depend on engine type. Turbine Kleen 81 Rx  can be used with dilution ration 1:2 for offline cleaning, providing a superb cleaning result for heavily fouled compressors

Technical specification

Physical Properties :

 

Appearance

:

Fluid

Colour

:

Light yellow

Odour

:

Characteristic

Odour threshold

:

Not determined

pH-value at 20°C

:

7-8

Melting point/Melting range

:

<0°C

Boiling point/Boiling range

:

110°C

Flash point

:

NA

Flammability (solid, gaseous)

:

Not applicable

Ignition temperature

:

225°C

Decomposition temperature

:

Not determined

Self-igniting

:

Product is not self-igniting

 

Safety data sheet (MSDS)

The MSDS for Turbine Kleen 81 RXSOL is sent by email. Fill in a short form and confirm your email address with a one-time code, and our team will send you the data sheet.

Request MSDS