RO Antiscalant 2020 Rx is a high performance non hazardous reverse osmosis (RO) antiscalant and dispersant, scientifically formulated for the treatment and protection of reverse osmosis membranes under high silica feed water conditions.A proprietary blend, RO Antiscalant 2020 Rx has been specifically designed for ro membrane systems with high silica feed-waters.
RO Antiscalant 2020 Rx is a proven high performance scale inhibitor against calcium carbonate and calcium sulfate scalants and combats silica fouling by a combination of anti-precipitation, anti-agglomeration and dispersancy processes.RO Antiscalant 2020 Rx is compatible with a wide range of materials and unlike other antiscalants, is not deactivated in the presence of iron.
can be used in reverse osmosis applications where the reject brine silica levels are as high as 230 ppm at 30oC and pH 7.5. All membrane elements based on Polyamide
chemistries including Thin Film Composite (TFC)
membranes when used as directed Viton
304 Stainless Steel EPDM
Neoprene
Buna-N
Hypalon
Polyurethane
Polyethylene
Polypropylene
Plasite 4300
Plasite 7122
INSTRUCTIONS FOR USE
Injecting : Best results are achieved when RO Antiscalant 2020 High Silica Inhibitionis injected downstream of multimedia filters and upstream of cartridge filters.
Dosing :
A typical RO Antiscalant 2020 High Silica Inhibition dose ranges from 2-5 mg/l. A site-specific dose can be determined using the Avista Advisor software program.
Dilution :
RO Antiscalant 2020 High Silica Inhibition is formulated to be injected neat. However, if dilution is required, use deionized water or RO permeate. If neither of these is available, softened water may be substituted. The dilution for RO Antiscalant 2020 High Silica Inhibition should not result in a solution strength of less than 10%. This guideline will protect the effectiveness of the internal bacteriostat, which inhibits bacterial growth in the product packaging and feed tank.
Product Benefits: