Water Clarifier
Part No: RXSOL-31-3047-005
SodiumChlorite is also used for water treatment purpose.
Sodiumchlorite Flakes or Powder 50% & 80% supplier in India and Middle East.
Application
Sodium Chlorite is being mainly supplied to textile industry, water purification Industry, etc. SODIUM CHLORITE pure is a white crystalline solid. Difficult to burn, but accelerates the burning of organic substances. Forms explosive mixtures with certain combustible materials. Used in water purification, to bleach wood pulp, textile, fats, oils; and for many other uses.
Dosage
NaClO2 or ClNaO2 have 2 No of Hydrogen Bond Acceptor capacity. Most Commonly Used in water purification, to bleach wood pulp, textile, fats, oils; and for many other uses.
Technical Specification
MSDS
| Product Name | Sodium Chlorite Powder |
| Part Number | RXSOL-26-1977-050 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Sikka, Dahej, Hazira, JNPT, Goa, Mangalore, Cochin, Tuticorin, Chennai, Kakinada, Vizag, Paradip, Kolkata, UAE, Singapore.
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| 123 @ rxmarine.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EC Number | Weight % |
| Sodium Chlorite | 7758-19-2 | 231-836-6 | < = 100 % |
| Signal Word | Word Danger |
| Hazard Statements | H271 May cause fire or explosion; strong oxidizer. H302 Harmful if swallowed. H310 Fatal in contact with skin. H314 Causes severe skin burns and eye damage. H373 May cause damage to organs (spleen) through prolonged or repeated exposure if swallowed. H410 Very toxic to aquatic life with long lasting effects. |
| Precautionary statement(s) | P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 Do not breathe dust or mist. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. |
| Supplemental Hazard information (EU) | EUH032 Contact with acids liberates very toxic gas. EUH071 Corrosive to the respiratory tract. |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| General advice | Consult a physician. Show this safety data sheet to the doctor in attendance. |
| Inhalation | If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. |
| Skin Contact | Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. |
| Eye Contact | Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. |
| Swallowed | Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Suitable extinguishing media Dry powder |
| Special hazards arising from the substance or mixture | Carbon oxides, Hydrogen chloride gas, Sodium oxides Carbon oxides, Hydrogen chloride gas, Sodium oxides. |
| Advice for firefighters | Wear self-contained breathing apparatus for firefighting if necessary. |
| Further information | No data available |
| Personal precautions, protective equipment and emergency procedures |
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8. |
| Environmental precautions | Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided |
| Methods and materials for containment and cleaning up | Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet brushing and place in container for disposal according to local regulations (see section 13). Do not flush with water. Keep in suitable, closed containers for disposal. |
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.Keep away from sources of ignition - No smoking. For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities | Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Never allow product to get in contact with water during storage. Do not store near acids. |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated. |
| Appropriate engineering controls | Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. Personal protective equipment . |
| Eye/face protection | Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). |
| Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales @ kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. |
| Body Protection | Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. |
| Respiratory protection | Where risk assessment shows air-purifying respirators are appropriate use a fullface particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). |
| Control of environmental exposure | Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. |
Gloves Suit
| Appearance Form | Powder |
| Colour | White |
| Odour | No data available |
| Odour Threshold | No data available |
| pH | 10,0 - 11,0 at 100 g/l at 20 °C |
| Melting point/freezing point | No data available |
| Initial boiling point and boiling range | No data available |
| Flash point | No data available |
| Evapouration rate | No information available |
| Flammability (solid, gas) | No data available |
| Upper/lower flammability or explosive limits | Lower explosion limit: 7 %(V) |
| Vapour pressure | No information available |
| Vapour density | Not applicable |
| Relative density | No Data Available |
| Water solubility | 545 g/l at 20 °C - OECD Test Guideline 105. |
| Partition coefficient; n-octanol/water | log Pow: < -2,7 |
| Autoignition Temperature | No Data Available |
| Decomposition Temperature | No data available |
| Viscosity | No information available |
| Explosive properties | No data available |
| Oxidizing properties | The substance or mixture is classified as oxidizing with the category 1. |
| Other safety information | No data available |
| Reactive | No data available |
| Chemical stability | Stable under normal conditions. |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | No data available |
| Incompatible materials | Strong reducing agents, Powdered metals, Phosphorus, Sulphur compounds, Zinc, Ammonia, Organic materials, acids, Amines |
| Hazardous decomposition products | Hazardous decomposition products formed under fire conditions. - Carbon oxides, Hydrogen chloride gas, Sodium oxides Other decomposition products - No data available Hazardous decomposition products formed under fire conditions. - Carbon oxides, Hydrogen chloride gas, Sodium oxides In the event of fire: see section 5. |
| Acute toxicity | No data available |
| Inhalation | No data available |
| Dermal | No data available |
| Skin corrosion/irritation | No data available |
| Serious eye damage/eye irritation | No data available |
| Respiratory or skin sensitisation | No data available |
| Germ cell | No data available |
| Mutagenicity | No information available |
| Carcinogenicity IARC | No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity No data available |
| Specific target organ toxicity | Single exposure No data available |
| Specific target organ toxicity | Repeated exposure No data available |
| Aspiration hazard | No data available |
| Additional Information | RTECS: VZ4800000 |
| Toxicity | No data available |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Other adverse effects | Very toxic to aquatic life. |
| Product | Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. |
| Contaminated packaging | Dispose of as unused product. |
ADR/RID
| UN number | 1496 |
| UN proper shipping name | SODIUM CHLORITE |
| Transport hazard class(es) | 5.1 |
| Packaging group | II |
| Environmental hazards | Yes |
| Special precautions for user | No data available |
IMDG
| UN number | 1496 |
| UN proper shipping name | SODIUM CHLORITE |
| Transport hazard class(es) | 5.1 |
| Packaging group | II |
| Environmental hazards | Yes |
| Special precautions for user | No data available |
IATA
| UN number | 1496 |
| UN proper shipping name | SODIUM CHLORITE |
| Transport hazard class(es) | 5.1 |
| Packaging group | II |
| Environmental hazards | Yes |
| Special precautions for user | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical safety assessment | For this product a chemical safety assessment was not carried out . |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |