Coolant Extended Life RXSOL ELC
Part No: RXSOL-16-4016-210
Formulated to cut greasy stains in a wide range of conditions including hard water. And Soft and mild on the hands.
RXSOL-16-1501-210 is a superior quality exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents,Biodegradable.
Application
Liquid Detergent (RXSOL-16-1501-210)
The wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the RXSOL-12-1501-210 thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of RXSOL-16-1501-210 substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL-16-1501-210 in correct dosages is half the job done.
| Appearance | Pale yellow liquid | |
| Density | In g/cm3 at 15°C: 1.01-1.10 | |
| Compatibility Metal | No known effect | |
| Rubber | No known effect | |
| pH | 6.5-8.5 | |
| PACKAGING | RXSOL-16-1501-210 |
Size (in Litres) 210 |
Dosage
Application :
RXSOL-16-1501-210 can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc.Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min.will sufficent for most applications.Hardened,carbonised or aged deposits may require up to 4 hours.
Note: Whenever possible,the cleaning solution should be heated to 60-80°C.If this method is not possible,other conventional methods such as separate rate direct injection,recirulation or hand spraying provide acceptable options. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary
Technical Specification
| Appearance | Pale yellow liquid | |
| Density | In g/cm3 at 15°C: 1.01-1.10 | |
| Compatibility Metal | No known effect | |
| Rubber | No known effect | |
| pH | 6.5-8.5 | |
| PACKAGING | RXSOL-16-1501-210 |
Size (in Litres) 210 |
| Appearance | Pale yellow liquid | |
| Density | In g/cm3 at 15°C: 1.01-1.10 | |
| Compatibility Metal | No known effect | |
| Rubber | No known effect | |
| pH | 6.5-8.5 |
| Appearance | Pale yellow liquid | |
| Density | In g/cm3 at 15°C: 1.01-1.10 | |
| Compatibility Metal | No known effect | |
| Rubber | No known effect | |
| pH | 6.5-8.5 | |
| PACKAGING | RXSOL-16-1501-210 |
Size (in Litres) 210 |
| Appearance | Pale yellow liquid | |
| Density | In g/cm3 at 15°C: 1.01-1.10 | |
| Compatibility Metal | No known effect | |
| Rubber | No known effect | |
| pH | 6.5-8.5 | |
| PACKAGING | RXSOL-16-1501-210 |
Size (in Litres) 210 |
| Appearance | Pale yellow liquid | |
| Density | In g/cm3 at 15°C: 1.01-1.10 | |
| Compatibility Metal | No known effect | |
| Rubber | No known effect | |
| pH | 6.5-8.5 | |
| PACKAGING | RXSOL-16-1501-210 |
Size (in Litres) 210 |
MSDS
| Product Name | Liquid Luandry Detergent |
| Product Type | RXSOL-41-8305-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| mail @ rxmarine.com |
HAZARDOUS INGREDIENTS: OSHA PEL TLV
There are no components contained in this material that are considered hazardous under 29CFR1910.1200.
IMMEDIATE HEALTH EFFECTS
Eyes: Overexposure may cause irritation to eyes.
Skin: Prolonged and repeated contact may cause irritation to skin.
Inhalation: Inhalation may cause irritation of upper respiratory passages.
IMMEDIATE HEALTH EFFECTS
Eyes: Overexposure may cause irritation to eyes.
Skin: Prolonged and repeated contact may cause irritation to skin.
Inhalation: Inhalation may cause irritation of upper respiratory passages.
EYES: Flush eyes with water for at least 15 minutes. If irritation persists, consult a physician.
SKIN: If irritation occurs, flush skin with water for at least 15 minutes. If irritation persists, consult a physician
INHALATION: If symptoms of overexposure develop, remove to fresh air. If symptoms persist, consult a physician.
INGESTION: Give 8 to 16 ounces of water to dilute substance. Do not induce vomiting. Consult a physician or local Poison Control Center. Never give anything by mouth to an unconscious person.
FLASHPOINT (° Fahrenheit): >200 degrees F.
EXPLOSIVE LIMITS: No data available.
AUTOIGNITION TEMPERATURE: No data available.
HAZARDOUS PRODUCTS OF COMBUSTION: In the event of fire, the following may be released: Carbon dioxide and/or carbon monoxide, oxides of nitrogen and sulfur.
EXTINGUISHING MEDIA: Water spray, foam, dry chemical powder of carbon dioxide.
FIRE FIGHTING INSTRUCTIONS: Firefighters should wear proper protective equipment and self-contained breathing apparatus with full facepiece operated in positive pressure mode. Move containers from fire area if it can be done without risk. Use water to keep fire-exposed containers cool.
SMALL SPILL: For small spills, soak up material with an absorbent such as clay, sand, or other suitable material and dispose of properly. Flush area with water to remove trace residue.
LARGE SPILL: Dike and contain spilled material. Remove with vacuum trucks or pump to storage/salvage containers. Soak up residue with an absorbent such as clay, sand, or other suitable material. Flush area with water to remove trace residue.
Also note: Surfaces can become slippery if spilled; tread carefully to avoid falling hazard.
HANDLING: Handle and open containers with care.
STORAGE: Store in a cool, well ventilated place away from incompatible materials.
| Respiratory Protection | None normally needed. |
| Protective Clothing | None normally needed. |
| Eye Protection | None normally needed. |
| Ventilation | Normal room ventilation should suffice Store above 55oF. |
| Storage |
Store out of reach of Children. Keep container tightly closed |
| Odor | Floral citrus fragrance |
| Physical State | Slightly viscous liquid |
| Appearance | Clear, light amber color |
| pH | 8.0 |
| Specific Gravity | 1.025 |
| Boiling Point | 212o F |
| Freezing/Melting Point | N/E |
| Vapor Pressure | N/E |
| Vapor Density | N/E |
| Solubility in Water | Complete |
CHEMICAL STABILITY: Stable.
CONDITIONS TO AVOID: None with proper storing and handling.
MATERIALS TO AVOID: Strong oxidizing materials.
HAZARDOUS DECOMPOSITION: Upon combustion, the following may be produced: Carbon dioxide and/or carbon monoxide, oxides of nitrogen and sulfur.
HAZARDOUS POLYMERIZATION: Will not occur.
ROUTES OF EXPOSURE: Skin absorption, eye contact, inhalation, and ingestion.
CARCINOGENITY: None of the components of this material are listed as carcinogens by IARC, NTP, or OSHA.
TERATOGINICITY, MUTAGENICITY, OR OTHER REPRODUCTIVE EFFECTS: No data available.
CONDITIONS AGGREVATED BY EXPOSURE: No data available.
SYNERGISTIC MATERIALS: No data available.
No data available.
Do not dispose of on the land, in surface waters, or in storm drains. Small spills and waste may be flushed into a waste treatment sewer where local regulations permit. Larger quantities should be collected for reuse or consigned to a licensed hazardous waste hauler for disposal in accordance with federal, state and local regulations.
All disposal must be in accordance with all federal, state and local regulations.
No restrictions for Ground, Air, or Maritime Transportation in accordance with 49 CFR parts 100-185.
All components are listed on TSCA.
This product has no established regulatory information. All regulatory information given is based on individual components of the mixture by component number. While this information and recommendations set forth herein are believed to be accurate and reliable, it is provided without warranty regarding its accuracy.
HOME PRO BY DESIGN MAKES NO WARRANTY WITH RESPECT HERETO AND DISCLAIMS ALL LIABILITY FROM RELIANCE THEREON.
Users must determine safe conditions for use and assume liability for any loss, injury, damage or expense resulting from use of this product.
N/A = Not applicable N/D = Not determined N/E = Not established
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
| Product Name | Liquid Luandry Deergent |
| Product Type | RXSOL-41-8305-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| mail @ rxmarine.com |
HAZARDOUS INGREDIENTS: OSHA PEL TLV
There are no components contained in this material that are considered hazardous under 29CFR1910.1200.
IMMEDIATE HEALTH EFFECTS
Eyes: Overexposure may cause irritation to eyes.
Skin: Prolonged and repeated contact may cause irritation to skin.
Inhalation: Inhalation may cause irritation of upper respiratory passages.
IMMEDIATE HEALTH EFFECTS
Eyes: Overexposure may cause irritation to eyes.
Skin: Prolonged and repeated contact may cause irritation to skin.
Inhalation: Inhalation may cause irritation of upper respiratory passages.
EYES: Flush eyes with water for at least 15 minutes. If irritation persists, consult a physician.
SKIN: If irritation occurs, flush skin with water for at least 15 minutes. If irritation persists, consult a physician
INHALATION: If symptoms of overexposure develop, remove to fresh air. If symptoms persist, consult a physician.
INGESTION: Give 8 to 16 ounces of water to dilute substance. Do not induce vomiting. Consult a physician or local Poison Control Center. Never give anything by mouth to an unconscious person.
FLASHPOINT (° Fahrenheit): >200 degrees F.
EXPLOSIVE LIMITS: No data available.
AUTOIGNITION TEMPERATURE: No data available.
HAZARDOUS PRODUCTS OF COMBUSTION: In the event of fire, the following may be released: Carbon dioxide and/or carbon monoxide, oxides of nitrogen and sulfur.
EXTINGUISHING MEDIA: Water spray, foam, dry chemical powder of carbon dioxide.
FIRE FIGHTING INSTRUCTIONS: Firefighters should wear proper protective equipment and self-contained breathing apparatus with full facepiece operated in positive pressure mode. Move containers from fire area if it can be done without risk. Use water to keep fire-exposed containers cool.
SMALL SPILL: For small spills, soak up material with an absorbent such as clay, sand, or other suitable material and dispose of properly. Flush area with water to remove trace residue.
LARGE SPILL: Dike and contain spilled material. Remove with vacuum trucks or pump to storage/salvage containers. Soak up residue with an absorbent such as clay, sand, or other suitable material. Flush area with water to remove trace residue.
Also note: Surfaces can become slippery if spilled; tread carefully to avoid falling hazard.
HANDLING: Handle and open containers with care.
STORAGE: Store in a cool, well ventilated place away from incompatible materials.
| Respiratory Protection | None normally needed. |
| Protective Clothing | None normally needed. |
| Eye Protection | None normally needed. |
| Ventilation | Normal room ventilation should suffice Store above 55oF. |
| Storage |
Store out of reach of Children. Keep container tightly closed |
| Odor | Floral citrus fragrance |
| Physical State | Slightly viscous liquid |
| Appearance | Clear, light amber color |
| pH | 8.0 |
| Specific Gravity | 1.025 |
| Boiling Point | 212o F |
| Freezing/Melting Point | N/E |
| Vapor Pressure | N/E |
| Vapor Density | N/E |
| Solubility in Water | Complete |
CHEMICAL STABILITY: Stable.
CONDITIONS TO AVOID: None with proper storing and handling.
MATERIALS TO AVOID: Strong oxidizing materials.
HAZARDOUS DECOMPOSITION: Upon combustion, the following may be produced: Carbon dioxide and/or carbon monoxide, oxides of nitrogen and sulfur.
HAZARDOUS POLYMERIZATION: Will not occur.
ROUTES OF EXPOSURE: Skin absorption, eye contact, inhalation, and ingestion.
CARCINOGENITY: None of the components of this material are listed as carcinogens by IARC, NTP, or OSHA.
TERATOGINICITY, MUTAGENICITY, OR OTHER REPRODUCTIVE EFFECTS: No data available.
CONDITIONS AGGREVATED BY EXPOSURE: No data available.
SYNERGISTIC MATERIALS: No data available.
No data available.
Do not dispose of on the land, in surface waters, or in storm drains. Small spills and waste may be flushed into a waste treatment sewer where local regulations permit. Larger quantities should be collected for reuse or consigned to a licensed hazardous waste hauler for disposal in accordance with federal, state and local regulations.
All disposal must be in accordance with all federal, state and local regulations.
No restrictions for Ground, Air, or Maritime Transportation in accordance with 49 CFR parts 100-185.
All components are listed on TSCA.
This product has no established regulatory information. All regulatory information given is based on individual components of the mixture by component number. While this information and recommendations set forth herein are believed to be accurate and reliable, it is provided without warranty regarding its accuracy.
HOME PRO BY DESIGN MAKES NO WARRANTY WITH RESPECT HERETO AND DISCLAIMS ALL LIABILITY FROM RELIANCE THEREON.
Users must determine safe conditions for use and assume liability for any loss, injury, damage or expense resulting from use of this product.
N/A = Not applicable N/D = Not determined N/E = Not established