Floor Stripper 20 Ltr
Part No: RXSOL-13-1041-020
Coco Di Amide It is used as foam booster and viscosity builder in Shampoo.
Cocodiethanolamide is non-ionic in nature. Because of high percentage of amide (~90%) and low percentage of free diethanol amine, it serves as a good foam booster, an excellent thickening agent and viscosity builder. It has wide application in cosmetics, Toiletories and textile softener preparation. It has benefit of more effective solubilisation of perfumes in your end product.
Application
It is used as foam booster and viscosity builder in Shampoo.
Coco-die is used as a foam booster for shampoos, additive in synthetic lubricants, viscosity modifier, conditioner, emulsifier, wetting agent, penetrate, dye dispersant scouring aid, anti stat, metal processing etc.
Dosage
It is used as foam booster and viscosity builder in Shampoo.
Technical Specification
|
|||||||||||||||
|
Composition / Information on Ingredients |
|||||||||||||||
|
|||||||||||||||
| Specifications | |||||||||||||||
|
|||||||||||||||
MSDS
| Product Name | RXSOL-19-1903-075 |
| Product Type | Coco Di Ethanol Amide |
| Revised date | 27-04-2021 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail @ rxmarine.com |
|
Chemical Entity |
Concentration |
CAS Number |
Proportion (%) |
|
|
| Fatty acid diethanolamide |
>80 |
68603-42-9 |
>80 |
|
|
|
Diethanolamine |
<10 |
111-42-2 |
<10 |
|
|
| Glycerol | <10 | 56-81-5 | <10 | ||
*See Section 16
|
Odour |
Smells of hydrocarbon. |
|
Appearance |
Liquid, colourless, insoluble in water. |
|
Contactwith eyes |
Causes irritation. |
|
Contact with skin |
Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis. |
|
Inhalation |
Wear full protective clothing and self-contained breathing apparatus. |
|
Ingestion |
The ingestion of significant quantities may cause nausea/vomiting, Harmful: may cause lung damage if swallowed (R65). |
|
General |
When heated to decomposition, may emit oxides of carbon and nitrogen. May also mit ammonia |
|
Contact with skin |
Remove contaminated clothing Wash affected area with plenty of soap and water Contaminated clothing should be laundered before reuse Seek medical attention if irritation persists. |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids Seek medical attention if irritation persists. |
|
Ingestion |
Do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention If vomiting occurs turn patient on side Give water or milk to drink Obtain immediate medical attention. |
|
Inhalation |
Remove patient to fresh air Keep warm and at rest, in a half upright position. Loosen clothing Seek medical attention if ill effects occur. |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45). |
- Auto-ignition point >200 deg C at 760 mm Hg.
- Lower flammability limit 0.6%(in air), Upper flammability limit 7%(in air), Flash point 63 deg C (CC).
- Decomposition products may include carbon oxides.
- In case of fire use water spray or fog, alcohol resistant foam, dry chemical or carbon dioxide (S43).
- Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback.
- Keep container(s) exposed to fire cool, by spraying with water.
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses. |
|
Immediate Actions |
Use appropriate containment to avoid environmental contamination (S57). |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up. Ventilate the area and wash spill site after material pick-up is complete |
|
Spills and Disposal, Methods and Materials for Containment and Clean Up Procedures |
For small spills, use appropriate tools to put spilled material in a convenient waste disposal container. For large spills, use appropriate instruments to put the spilled material in a waste disposal container. Dispose of in accordance with regional regulations. Surface will be slippery after spillage. |
|
Precautions for Safe Handling and Storage |
Avoid contact with eyes, skin and clothing. DO NOT ingest. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling. Do not eat, drink or smoke in contaminated areas. Before eating, drinking or smoking, remove contaminated clothing and wash hands. Do not store near strong oxidants. |
|
Storage |
Keep container tightly closed, in a cool, well ventilated place (S3/7/9).Keep away from open flames, hot surfaces and sources of ignition. |
|
Biological Limit Values |
No biological limit allocated |
|
Respiratory Protection |
Wear appropriate respirator when ventilation is inadequate |
|
Hand Protection |
Use solvent resistant gloves. Nitrile, PVC or neoprene. |
Respirator Gloves Goggles Suit
|
Odour |
Ammoniacal |
|
Appearance |
Light brown liquid |
|
pH 10% solution |
8.0-11 |
|
Boiling Point (°C) |
>260 |
|
Vapour Pressure (mmHg @ 20°C): |
<0.1 |
|
Vapour Density (air = 1) |
N/A |
|
Freezing Point (°C): |
N/A |
|
Soluble in water Soluble |
|
|
Specific Gravity (g/ml @ 15°C): |
1.00 |
|
Lower Flammability limit |
N/A |
|
Upper Flammability limit |
N/A |
|
Flash Point (°C) |
94 (PMCC) |
|
Auto Ignition Temperature (°C) |
N/A |
|
Log Pow |
3.5 - 4.7 |
|
Viscosity |
1.59 cST @ 25 deg C |
Chemical Stability: Stable under normal conditions of use.
Conditions to Avoid: Avoid heat, sparks, open flames and other ignition sources.
Incompatible Materials: Strong oxidising agents and Strong acids
Hazardous Decomposition Products: Burning can produce ammonia, carbon monoxide and/or carbon dioxide, and oxides of nitrogen.
|
Swallowed |
Oral rat LD50 2.0-5.0g/kg for fatty acid diethanolamide, 620ul/kg for diethanolamine Oral Rabbit 2200mg/kg for rabbit |
|
Eye: |
Iirritating to the eyes |
|
Skin: |
Repeated skin contact may cause a persistent irritation or dermatitis |
|
Inhaled: |
Irritates the nose and throat, may experience headache, nausea and drowsiness |
|
Carcinogenicity |
No evidence of carcinogenic effects. |
|
|
|
|
Ecotoxicity |
Avoid contaminating waterways |
|
Mobility |
Miscible with water |
|
Persistance/Degradability |
Biodegradable |
|
Bioaccumulation Potential |
Low bioaccumulation potential. |
|
Adverse Effects |
No environmental problems are expected when the product is used / handled correctly.In its intended use, the product will not be released into the environment. |
|
Disposal Methods |
Ensure waste disposal conforms to local waste disposal regulations. |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation. |
UN Number: NR - Proper Shipping Name: NA
Class: NR - Subsidiary Risk: None allocated
Packing Group: NR - Hazchem Code: NA
Special Precautions for User:
|
Poisons Schedule |
5 |
|
AICS |
Listed |
The information sourced for the preparation of this document was correct and complete at the time or writing to the best of the writer’s knowledge. The document represents the commitment to the company’s responsibilities surrounding the supply of this product, undertaken in good faith. This document should be taken as a safety guide for the product and its recommended uses but is in no way an absolute authority. Please consult the relevant legislation and regulations governing the use and storage of this type of product
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.