Medium Cloud Point Glycol (RXSOL MCPG)

RXSOL WICI (WATER INJECTION CORROSION INHIBITOR) provides excellent protection from Corrosion, which can be caused in Water Injection System, Wash Waters used in De-salting Plants and Wet Production System. Huge amount of Water used in Oilfield Applications /Refineries which contains many corrosive substances like Dissolved Oxygen and various Salts. It is designed to control internal corrosion caused by dissolved oxygen and other ions in Oil & Gas production systems, Gas pipe lines, Water storage / Injection systems and pipelines. RXSOL WICI (WATER INJECTION CORROSION INHIBITOR) is a water-soluble  biodegradable organic corrosion inhibitor which is compatible with all other Water Treatment Chemicals used in Water Injection System, De-salting Plants and Wet Production System.

RXSOL WICI (WATER INJECTION CORROSION INHIBITOR) is compatible with all other Water Treatment Chemicals used in Water Injection System, De-salting Plants and Wet Production System.

Dose: From the field experience, standard range of Dose Rates is 10-30 PPM.

 Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA 

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Surat, Vizag, Fujairah, Muscat, Nairobi

Additional Information: Ingredient(s) indicated as hazardous have been assessed under standards for workplace safety.

Appearance: Clear, colorless liquid

Statement of Hazard: Non-hazardous in accordance with international standards for workplace safety.

EU Indication of danger: Not classified

Australian Hazard Classification (NOHSC): Non-Hazardous Substance. Non-Dangerous Goods.

Note: This document has been prepared in accordance with standards for workplace safety, which require the inclusion of all known hazards of the active substance or its intermediates regardless of the potential risk. The precautionary statements and warnings included may not apply in all cases. Your needs may vary depending upon the potential for exposure in your workplace.

Eye Contact: Due to the nature of this material first aid is not normally required.

Skin Contact: Due to the nature of this material first aid is not normally required.

Ingestion: Due to the nature of this material first aid is not normally required.

Inhalation: Not an expected route of exposure.

No Occupational Exposure Limit (OEL) or Short Term Exposure Limit (STEL) has been identified:

Engineering Controls:
Engineering controls should be used as the primary means to control exposures.

Environmental Exposure Controls:
Refer to specific Member State legislation for requirements under Community environmental legislation.

Personal Protective Equipment:
Refer to applicable national standards and regulations in the selection and use of personal protective equipment (PPE).

 Not Aplicable

 Environmental Overview: No harmful effects to aquatic organisms are expected. 

Waste Treatment Methods:
Dispose of waste in accordance with all applicable laws and regulations. Member State specific and Community specific provisions must be considered. Considering the relevant known environmental and human health hazards of the material, review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure and environmental release. It is recommended that waste minimization be practiced. The best available technology should be utilized to prevent environmental releases. This may include destructive techniques for waste and wastewater.

The following refers to all modes of transportation unless specified below.

Not regulated for transport under USDOT, EUADR, IATA, or IMDG regulations. 

EU Indication of danger: Not classified

OSHA Label: Non-hazardous in accordance with international standards for workplace safety.

Canada - WHMIS: Classifications

WHMIS hazard class: None required

Water for injection:

Inventory - United States TSCA - Sect. 8(b): Present

Australia (AICS): Present

REACH - Annex IV - Exemptions from the obligations of Register: Present

EU EINECS/ELINCS List: 231-791-2

Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37:Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.