Silicone Defoamer
Part No: RXSOL-81-8150-210
Where foaming creates intense problem especially where aqueous systems are followed. Addition of Silicone Defoamer prevents formation of foam and if foam formed then it eliminates within seconds.
Silicone Defoamer is used where foaming creates intense problem especially where aqueous systems are followed. Addition of Silicone Defoamer prevents formation of foam and if foam formed then it eliminates within seconds.
Silicone Defoamer is silicone base proprietary product used extensively in a wide variety of industrial batch processing applications. These include petroleum refining, textile processing leather finishing, fermentation processes, oil and antifreeze operations, etc…
Application
Application :
In jet dyeing machine or for similar processes Silicone Defoamer is recommended in the concentration range of 0.1 to 0.2 gms / litre.
Dosage
Technical Specification
MSDS
| Product Name | Silicone Defoamer |
| Product Type | RXSOL-81-8150-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai, Chennai, Vizag, Kolkata, UAE, OMAN, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail @ rxmarine.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Silicone Derivative | ------ |
Formulatory |
W/W | None Established |
| PETROLEUM mixture | 8008-20-6 | Formulatory | w/w |
Generally non hazardous in normal handling, however good laboratory practices should always be used.Avoid long term exposure to skin or by inhalation.
Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.
|
SKIN: |
Wash exposed area with soap and water. If irritation persists, seek medical attention |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. If symptoms persist, seek medical aid |
| INHALATION: | Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention.If large amounts are swallowed give water to drink and seek medical aid. |
|
Fire Extinguisher Type: |
for large fires use carbon dioxide, dry chemical powder or water spray. On small fires use carbon dioxide, drychemical or water spray. |
| Fire / Explosion Hazards: | None Known. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Absorb spill with inert material. Dilute excess with water and flush down drain.
Store in a cool dry place. This material is not considered hazardous. Use normal safe laboratory
|
Respiratory Protection |
No special protection required |
|
Ventilation |
Local |
| OTHER |
Mechanical |
| Protective Gloves | Gloves to prevent exposure |
| EYE PROTECTION | Splash Goggles -satety glasses as a minimum. |
| Other Protective Equipment | Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | 312°F |
| VAPOR PRESSURE | Not available |
| MELTING POINT | 30°F |
| VAPOR DENSITY | Not available |
| EVAPORATION RATE | <1 |
| Appearance /Odors | White, Viscous Liquid/SlightOder |
| Flash Point | >214°F(>101.1° C)(Closed cup |
| Specific Gravity | 1.0 |
| Percent Volatile by | 0 |
| Evaporation Standard | Butylacetate =1 |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air |
Not applicable |
| Upper Flamm. Limit in Air |
Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
Oxidizing material can cause a reaction |
|
MATERIALS TO AVOID |
None known |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Carbon dioxide, carbon monoxide,formaldehyde |
|
HAZARDOUS POLYMERIZATION |
will not occur |
| Conditions to Avoid | None known |
handling practices. Acute toxicity Oral LD50 estimated to be greater than 5000 mg/kg
Chronic toxicity:None known
Specific effects
Carcinogenic effects:None known
Mutagenic effects:None known
Reproductive toxicity:None known
Target organ effects None known
Environmental Information:No data available
Waste from residues / unused products:Dispose of according to all federal, state and local applicable regulations
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
International Inventories
All components of this product are listed on the following inventor ies: U.S.A. (TSCA), Canada (DSL/NDSL), Australia (AICS), Phlippines (PICCS),China (IECSC).U.S. Regulations California Proposition 65:This product is not subject to the reporting requirements under California's Proposition 65 STATE RIGHT TO KNOW
Ingredient(s)Water 7732-18-5 CERCLA/ SARA None Canada WHMIS hazard class:Non-controlled 
Flammability Health Reactivity
|
Revisions |
NFPA |
| 7/30/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
| 3/25/2013 | 0.2 Revise all sections to indicate Non-hazardous mixture. LS |
| 3/4/2009 | 0 Creation date LS |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.