THYMOL BLUE SODIUM SALT ACS GRADE

You can easily remove soiling containing oil-carbon, grease , calcification or layers of oxidation on aluminium, brass, copper, bronze, chrome or high-grade steel. Nonferrous metals are lightened up. Deposits of iron ( Fe ) on chrome steel are removed, the surface is neutralised and the chrome layer is protected. A protective anticorrosion layer is formed on aluminium. The inhibitors protect iron parts against acid and prevent unnecessary influences on the structure of the non-ferrous metals.

Where you can use RXSOL-16-1028-025 for the removal of oil carbon, the cleaning of oil coolers and heat exchangers as well as soiling and calcification from radiator fins; inside and outside for the removal of layers of oxidation and to lighten up non-ferrous metals. for cleaning aluminium surfaces, containers, tanks, trucks, truck bodies facades and all devices or parts made of aluminium. for cleaning copper, bras and bronze. In the immersion bath: for cleaning radiators, engine heads and drives. for cleaning aluminium, bras or copper parts. for cleaning high-grade steel tools and instruments. for removing rust from iron, neutralisation ( passivation ) Ultrasound supports and accelerates the cleaning effect

DIRECTIONS: Dilute with 5 to 50 parts of water Apply working from the bottom up (Applying from the bottom up avoids streaking) Do not allow to dry on the surface Rinse area before starting on to the next area Do not use on aircraft. On anodized or highly polished aluminum, magnesium, glass or ceramic. If contact is made rinse off immediately with water.

RXSOL-16-1028-025 contains no complexing agents therefore your water treatment system can function undisturbed and optimally precipitate heavy metals. 

RXSOL-16-1028-025 does not contain chlorinated hydrocarbons such as TRI - or perchlorethylene. Therefore, no closed or cooled systems are necessary for immersion cleaning.

Immersion bath: mix 1 : 5 with water, immerse parts for 10 to 60 minutes. immerse heavily soiled oil coolers, finned radiators, engine heads with radiator fins etc., for 1 to 5 hours - overnight the longest. Rinse well with high-pressure cleaner, pulse-spray or hard JET of water. Immersion bath - also in > through-feed mode< can be heated. Warm water speeds up the cleaning process. Bath temperature aprox. 40° max. 60° C. Every increase of the bath temperature by 10°C reduces the cleaning time by about half.
Example:  
20°C = cleaning time aprox. 60 min.
30°C = 30 min.  
40°C = 15 min.

Ultrasound bath: Ultrasound considerably speeds up the cleaning process

Fist rule: Per 100 litres of cleaning solution you need about 1 kW transmitting power. These baths can also be heated. For the external cleaning of radiator fins: First remove severe soiling with industrial vacuum. 

Dilute RXSOL-16-1028-025  with water at a ration between 1 : 3 and 1 : 10, depending on the degree of soiling, apply with sprayer. Let sit for approx. 15 to20 minutes. Wash with steam cleaner or high-pressure cleaner. Clean air channels slowly and systematically with nozzle held vertically to the air fins. ( Make sure you observe instructions of the cooler manufacturer with regard to maximum pressure; otherwise the fins may bend or the radiator may be damaged. high- pressure cleaners - approx. 80 bar max. Compressed air for blasting: approx. 6 bar. ) For cleaning surfaces and appliances, depending on the degree and kind of soiling, dilute with water at a ratio of 1: 3 to 1 : 20. apply, let sit - rinse well. For cleaning anodised surfaces use a ratio of 1 : 3 to 1 : 30. For removing layers of oxidation and lightening on non-ferrous metals, use a ratio of 1 : 1 to 1 : 3. Rinse parts of surfaces well after treatment. Soiling is removed and subsequent treatment, e.g. varnishing, is not effected. A shiny gloss will appear on aluminium and brass. Copper and brass can quickly develop a natural patina. Oiling or treating with clear lacquer or with RXSOL-16-1028-025 preserves its gloss. Due to the versatile possibilities of use, our information sheets can only offer advice according to our best knowledge. We can not accept liability for damages. The organic ingredients of RXSOL-16-1028-025 are biodegradable. 

It is very Powerful Aluminium Cleaner

This product is avilable with all our associated ship chandlers of INDIA and Middle East by product code no RXSOL-16-1028-025.

we are manufactrer of RXSOL-16-1028-025 , and supplier in kakinada, Visakhapatnam, Vizag, Mumbai, Goa, Surat, Gandhidham, Kandla, Mundra, Chennai, Ennore, Kolkata, Haldia, Pirpav, Fujairah, Dubai, Sharjah, Abu Dhabi and Gulf.

RXSOL brand Aluminium Cleaner exporter for TURKEY, Australia.

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Muscat - Barka, FUJAIRAH, Mumbai, Kolkata, Chennai, Vizag, Gandhidham, Canada

N/A

 NA 

N/A 

Effects of the acute exposure on the routes of administration.

 N/A

 N/A

 N/A

 N/A

N/A

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.